Question about Washing Machines

1 Answer

Bosch WFL 2872 washing machine has just started beeping (3 beeps) at approx 1 minute intervals at end of program until I turn machine off. washer is 3 years old & has never done this before - does it indicate a problem or should I not worry?!

Posted by on

  • 2 more comments 
  • caroline2812 Aug 30, 2008

    It worked!! I guess my 2 year old must have tried this solution previously & turned it the sound on!!!

    Thanks v. much..........

  • Anonymous Jan 17, 2009

    THANK YOU!!!

  • Anonymous Jan 19, 2009

    My bosch maxx 2680 beeps three tikmes when it finished the cycle. How do I turn this off?

  • wendy_philli May 11, 2010

    my Bosch WFL 2872 washing machine wont flush fabric conditioner through. Help!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

A similar thing happened to mine. I think it starts when there is a power cut or something similar mid cycle. The solution (which you would never guess!) is the following:

Select any programme - say 30 Cottons
Press and hold any function button - NOT Start Signal will sound at varying levels - release button when it gets to the level that you want, off in your case. De-select programme Good luck!

Posted on Aug 28, 2008

  • Voz79 Mar 16, 2012

    Thanks! My wfl2861 suddenly started beeping at end of program as well... No mention of any beep in the user manual... Your solution fixed it! Nice, undocumented features...

  • alaMakota
    alaMakota Jan 20, 2014

    god bless you sir!!!1

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the procedure to stop the beeping when wash is done. Not only does it beep it keeps on beeping every 30 sec.?


My one beeped every 30 seconds to tell me that the cycle was finished.It should stop itself after about 15 minutes,or just turn the machine off.

Jun 08, 2014 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

Turn off beeping bosch wfl 2060


All you need to open the control panel and remove the connection to the buzzer unit.
If the washer works fine , the buzzer can be disconnected

Jul 03, 2012 | Bosch Axxis WFL 2060 Front Load Washer

2 Answers

How do I stop my Bosch logixx 8 from beeping endlessly at the end of a cycle?


hi, I found out last night after being wokenup by endless beeping.... start with program dial at " off position", then turn 1 notch to the right, and then press and hold eco-perfect button and turn prog.dial 1 notch to the right. a number will appear in the display. press"clock" button until number is 0. then turn prog.dial one notch more and do the same. all sounds are off now....

May 09, 2012 | Washing Machines

1 Answer

Bosch WFL 2872 washing machine that is leaking during wash/rinse cycle. Looks like it is due to rubber manifold between drum and pump - how difficult a repair is this?


Bosch WFL 2872 washing machine that is leaking This video will show you how to change the pump washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook
or it could be the seal


Oct 09, 2011 | Bosch Axxis WFL 2060 Front Load Washer

1 Answer

Not washing


helen going by what you are saying i would say its the program cycle switch needs replacing,adrian

Jan 13, 2009 | Bosch Classixx WFL 2066 Front Load Washer

2 Answers

Very annoying beep when finished programme


When the machine is on, but not running, press and hold the "pre-wash" button. After a few seconds it will begin that beep noise, keep holding it in until the beep volume goes down and finally stops completely (5-10 secs). Once the beep has stopped, release the button and voila, no more annoying beeps at the end of your cycle.

To restore the end of cycle notification (beep) do the same thing as described above, but release the button earlier while the beep is still going.

Nov 23, 2008 | Bosch Classixx WFL 2066 Front Load Washer

2 Answers

Stop beeping at end of wash on bosh machine


When the machine is on, but not running, press and hold the "pre-wash" button. After a few seconds it will begin that beep noise, keep holding it in until the beep volume goes down and finally stops. Once the beep has stopped, release the button and voila, no more annoying beeps at the end of your cycle.

To restore the end of cycle notification (beep) do the same thing as described above, but release the button earlier while the beep is still going.

Aug 16, 2008 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

Bosch WFK 2401 problem, please help


this could be a block in the pump or motor brushes would go for the pump

Jun 22, 2008 | Bosch Classixx WFL 2462 Front Load Washer

3 Answers

GLW10US won't do anything but beep


well i don't have any experience with this brand but i would say you need to change the fill switch it senses how much water is in the tub shuts the water off then starts the washer its also called the pressure switch

Feb 16, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

2,021 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...