Question about Philips 37PF9631D 37 in. LCD HDTV
When try to turn on the tv the light blinks 6 times red and wont come on
The red light blibking 6 times indicates that the power supply board has a defective or damaged area. I know this because i had the same problem...bought a damaged tv for parts and replaced the power supply board as the tv would not turn on...wokrs like a charm now.
Posted on Dec 03, 2008
While this blinking red light may indicate a potential hardware problem, it may just as easily be the result of a built-in protection to prevent the TV from being damaged by power surges. To determine if this is the case, I would suggest unplugging the TV and all connected devices for a few minutes. If the TV operates normally once you've plugged everything back in, the unit may only have needed to be reset.
You may also wish to refer to your owner's manual documentation and troubleshooting FAQ for more information. Some model TV's will have error codes listed in the owner's manual that are dictated by the number of times a given light flashes on the front panel of the TV.
Hope this helps you out.
Go Ahead. Use Us.
Posted on Jul 24, 2008
I have the same exact problem with my phillips tv 47 lcd, always happens after it is raining. must reset the power strip for it to turn on properly
Posted on Oct 04, 2008
SOURCE: PICTURE WENT BLANK TV TURNED OFF
Replace the thermal fuse part# 1-910-006-44 You can verify this by jumping the connector where the fuse connects and the lamp will come on.
Posted on Aug 21, 2007
Power supply board have dead capacitors.U know how to solder?Replaced these capacitors that bulge up,puff up or burst open.Should get ur power back.Or replaced a whole power refurbish power supply buy it at Shopjimmy.com,Ebay.com.
Posted on Feb 06, 2010
Tips for a great answer:
Mar 23, 2014 | Flat Panel Televisions
Dec 10, 2011 | Panasonic Viera TH-42PZ85U 42 in. Plasma...
Apr 10, 2009 | Sony WEGA KDE-42XBR950 42 in. HDTV Plasma...
Jan 11, 2009 | Sony KDF-E55A20 55 in. LCD Television
1,544 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: