Question about Panasonic PT-53WX54 53" Rear Projection HDTV

1 Answer

Panasonic PT-53WXD63G Flyback, H.O.T., and Triper

I was advised to replace the flyback to resolve my problem. I am wandering if the flyback, HOT, and the triper are all in one unit on the Panasonic PT53WVD63G. If not, what does the HOT look like? When I replace the flyback on this unit, do I splice the two wires connecting to the flyback or there to way to disconnect from the flyback? The thicker red/orange wire HV connects from the flyback to a collector which has all the thicker red wires coming from the CRTs. Does the red wire to the flyback disconnect from the flyback or collector? Does the thinner wire from the flyback disconnect?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 8,617 Answers

The small wires are disconnected at the focus and screen control block, and the large HV cable is disconnected from the HV splitter.you may have to reuse the large red wire if the new flyback doesnt have the HV lead attached. The Hot is the horizontal output transistor its mounted to a aluminum heat sink near the flyback.

Posted on Jul 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic PT-53WXD63G convergence problem


Hey, you are in my area--I live in Santee--let me know if you want me to do it. shoot me a email if you want my instructions so you can do it yourself.

etower.766@netzero.net

Aug 28, 2009 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

Pt-53WXD63g led blinks 3 times


that is an indication that you need to replace the convergence IC's if you are handy and can do light soldering please contact me at techman32katyahoodotcom for a DIY solution and save yourself at least 400 bucks or so

Aug 06, 2009 | Panasonic PT-53WX54 53" Rear Projection...

1 Answer

Panasonic pt-47wx53g horizontal outout transitor short whit new transistor flyback voltage are all to low the tv does notlight up the crt


Hello oncle_jc,

You may have a problem with your flyback transformer, I would suggest that you perform a ring test to see if any of your windings on the flyback are shorted. In addition You may want to also check the input to the Horizontal Output Transistor, to see if the driver pulses are of the proper amplitude. Besides these two things the only other issue colud the the high voltage trippler (if this is not part of the flyback). Check these things, you will need the following equipment:

1) oscilloscope

2) voltmeter (multimeter set to DC volts)

3) High Voltage probe

4) A test set that can perform a ring test (My shop uses the Sencore LC102)

Or what you can do is take the flyback out and take it to a TV shop and for a small fee they can run the test for you, (My shop usually charges $20.00 - $30.00 for this

I hope this helps

Shuttle83

http://www.electron-age-technologies-llc.com

Feb 24, 2009 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Ge d52gw12 rear projection tv


Thats the error code for a bad flyback. Its a very easy an ixspensive repair. You can get a new replacement flyback at the following link for under 50.00 and free tech support so you can install it yourself. here is the link you need flyback 265409 for your model.
http://servicemanuals.vstore.ca/

Jun 28, 2008 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

R517 Burnt D" board


you will need the flyback as thats way to low. The HV splitter will only direct the HV to each of the CRTs it doesnt change or regulate the HV in any way just directs (splits) it. Let me know if you need any more assistance.

May 07, 2008 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

I replaced the bad capacitor and now!?


Are you sure the flyback was clicking? Usually it arc's inside or externally to metal chassis. There is a relay that clicks on & off , which could be what you are hearing. Your bad cap, is it in the power supply or near the flyback? A regulator is more of a possibility than the flyback.

Jul 21, 2007 | Panasonic PT-47WX49 47" Rear Projection...

Not finding what you are looking for?
Panasonic PT-53WX54 53" Rear Projection HDTV Logo

Related Topics:

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...