Question about Philips 50PFP5332D 50 in. Plasma Television

1 Answer

Picture Problems On 50 Inch Philips Plasma

I purchased a 50inch Philips plasma television in March 2008. Lately the picture has been giving me problems and is happening more often. The first instance of trouble was the picture not displaying when powering on; only the sound could be heard. In another instance upon powering on only reddish wavy diagonal lines could be seen across the screen. In the latest instance while watching a program there was a half-inch bar across the entire bottom that looked like static. On the leftside of the screen was a vertical orange bar approximately 3 inches wide. The reddish wavy lines were also present across the screen. In each of these instances the television would shut itself off and the blue power light would then flash a series of error codes. First was 3 steady flashes followed by 2 rapid flashes. Then another set was 4 steady flashes followed by 6 rapid flashes. Since its under a year old I believe it should be under warranty. Any ideas what kind of a fix this might take? I dread having to drag that thing somewhere to be repaired. Thank you.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

You plasma still under manufacturers warranty. Most electronic devices have one year warranty.
The failure in your TV can only be corrected by repairing it.
I would suggest to call philips and ask them to find you an authorized repair center near you to get your TV fix under their warranty.

Posted on Jul 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Panasonic plasma Tv does not have sound. How do I fixed that


Sound no picture on 50 inch samsung plasma ps51d450a2m - HDTV ...

www.tomsguide.com/.../58009-4-sound-picture-inch-samsung-plasma-ps...

Jul 1, 2015 - 4 posts - ‎3 authors
There is sound and no picture on plasma tv, remote works at times but ... My pioneer elilte has this mode, and it is pretty easy to completely turn ... When I connect my Laptop to my TV thru HDMI cable I ...
5 posts
Feb 22, 2015
Problems with blu ray player and plasma tv - HDTV ...
7 posts
Nov 16, 2014
I do not have audio out on my tv how do i connect so ...
8 posts
Dec 18, 2013
All channels on my tv have sound except channel 3 ...
4 posts
Jun 29, 2010
More results from www.tomsguide.com

No picture or sound in my Panasonic TH-P42UT30A plasma ...


Dec 07, 2015 | Panasonic Viera Th-50px60u 50" Plasma...

1 Answer

I turn on my 50PF9956 get sound but no picture. For 2 weeks before it started taking longer to get the picture. I tried the menu with nothing


The plasma picture tube technology lasts only 24 months before it burns itself out, requiring a new
plasma picture tube. The LCD and LED technologies do not suffer from this short life span.
If your Philips 50PF9956 is over 2 years old, you've got all the use your plasma can give.
Fix: new plasma display - the electronics controlling the plasma display are most likely fine - just
like the electronics providing audio to the speakers. Your set's only problem is a burnt-out display.

Jan 17, 2011 | Philips 50PF9956 50 in. HD-Ready Plasma...

1 Answer

My 50inch plasma is getting red blotches all over and very frequent? what is the prob


you only seed problem on dark picture?...

you need to adj. volt. on y-sus pc board or power board

Nov 17, 2010 | Samsung PS50A466 50 in. Plasma HDTV-Ready

1 Answer

I have a 50 inch plasma and the picture went black but I have sou


You should check the a/v cables, one of the yellow cables is probably broken if not you should get a new cable

Dec 07, 2009 | Maxent MX-50X1 50 in. Plasma Television

1 Answer

2003 philips 50" plasma tv with picture fading. How do I fix this?


Hi,my philips plasma 50FD9934 dont turn on just led flasing red and green contniusly.Please help!!!!This is a power suply problem?thanks

Nov 14, 2009 | Philips 50FD9934 50 in. Plasma Television

3 Answers

50 in philips hd plasma with ambilight model number 50PF9631D/37


The x-sus and y-sus panels have some fuses,check to find out wich panel is broken and replace.

Sep 04, 2009 | Philips 50PF9631D 50 in. HD-Ready Plasma...

1 Answer

LG plasma tv made loud popping noise


The plasma gas tubes may be damaged or the gas couldve leak out. remember plasma have to remain upright at all times even when transporting them, if they are not you should just set it up straight for about 3-4 hours before turning it on.

Apr 23, 2009 | LG 50PX5D 50 in. Plasma HDTV

2 Answers

Phillips 50 inch Plasma


Philips 50 inch plasma tv no video but has sound

Sep 28, 2008 | Philips 50PFP5332D 50 in. Plasma...

Not finding what you are looking for?
Philips 50PFP5332D 50 in. Plasma Television Logo

587 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4576 Answers

Are you a Philips Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...