Question about Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

1 Answer

Phenom so we need to get image out of the unit. remove everything extra, dvd hdd etc, only leave cpu memory and vga connected, also remove the extra vga try starting up.

Posted by on

  • 10 more comments 
  • Ekse Jul 24, 2008

    you payd 3 times?

  • Ekse Jul 24, 2008

    Remove all the ram and hear the beeps. insert only one memory module and see what happens do you get any picture? for refunds. if you post more messages use the free one, to forum.

  • Ekse Jul 24, 2008

    that sounds like faulty video, try the other video card.

  • Ekse Jul 24, 2008

    IBM bios - one long, two short - VIDEO (mono/cga display circuitry) issue

    Ami bios, this is yours i checked with asus.

    one long, two short - An error was encountered in the video BIOS ROM, or a horizontal retracing failure has been encountered

    both point to faulty video, try the other card. see if you get same results, remove the ram again etc..

  • Ekse Jul 24, 2008


    1 long 2 short - video error, cannot initialize screen to display any information.

  • Ekse Jul 24, 2008

    when you remove the ram, you should be geting 1 to 4 beeps or one long beep / 1 long 1 short, 1 long 2 short is video.

  • Ekse Jul 24, 2008

    I know the 1 long 2 short too well from my acer laptop vga failing every 12 months :)

  • Ekse Jul 24, 2008

    Sorry to say im going to sleep right now, I will get back to you when I wake up, first thing!

    leave any comments, here or click on ask me to post a new topic. (make sure its set on free) Il read my email and then come to fixya the first thing I wake up.

    Talk to you soon.

  • Ekse Jul 24, 2008

    So hows it going? tried the other video?

  • Ekse Jul 24, 2008

    Oh, 1 long 3 short, extended memory failure,,

  • Ekse Jul 26, 2008

    so hows it going?

  • Ekse Jul 26, 2008

    Yeah, hows it going?


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Nope, that did'nt work either. The answer to the other question is yes ,I paid 3 times. Is there a way around that?

Posted on Jul 24, 2008

  • 3 more comments 
  • Greek19150 Jul 24, 2008

    Nope, it just had a different beeping pattern of 1 long 2 short beeeps but didn't turn off. Then I tried 1 2gb stick and it runs then seems like it down shifts after 10 seconds then after another 10 it shuts off.

  • Greek19150 Jul 24, 2008

    I switched video cards and now it ran but then had 1 short beep then 3 quick short beeps then powered off after 10 seconds.

  • Greek19150 Jul 24, 2008

    Ok goodnight, its 1 am here i'm tired too

  • Greek19150 Jul 24, 2008

    I went through my Motherboard book and looked at which memory is best recommended. I ordered it and it should be here tommorow.MEM 1G|CORSAIR CM2X1024-6400 R - Retail (Qty=2, Price=$54.00)
    (Shipped from Memphis, TN)
    MEM 1Gx2|KST DII667 KVR667D2N5K2/2G - Retail (Qty=1, Price=$42.99)
    (Shipped from Memphis, TN)

    1 of these has to work. Yeah its a downgrade but if i can get it running i may be able to set the bios on the motherboard to accept 1066 Mhz. It says that it can be upgraded through the bios.

  • Greek19150 Jul 26, 2008

    Ekse you out there?


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I upgrade an AMD Phenom II x3 710

I suspect you mean the Motherboard that has the AMD Phenom II x3 710.

If so then find specifications on that motherboard to see what better, faster? CPU is compatible with it.

4th Core is Disabled by AMD and you need to know how to enable it?
Maybe this can help.
Overclocking Phenom II x3 710 2 6GHz to 3 5GHz unlocking 4th core

Hope it helps

Oct 11, 2014 | AMD Computers & Internet

1 Answer

Problem with AMD 2.1GHz Phenom X3 Tri-Core 8450 AM2+ 3.5MB HD8450WCJ3BGH

Your motherboard might finally need replacement. If the temperature sensors aren't working and the motherboard isn't controlling the CPU fan, that shows you might have some problems with it. Did you try going into BIOS Setup and checking your settings? Check the cooling settings. Many motherboards have aggressive CPU temp monitoring as well, so if the CPU gets hot, the PC will shut down.

Jan 09, 2014 | AMD 2.1GHz Phenom X3 Tri-Core 8450 AM2+...

1 Answer

AMD 2.1GHz Phenom X3 Tri-Core 8450 AM2+ 3.5MB HD8450WCJ3BGH

That CPU will not work in that motherboard. That motherboard is socket AM3, while the CPU is socket AM2. The sockets are not much different, but they are designed to prevent trying to use a CPU that only supports DDR2 memory in a motherboard that only supports DDR3 memory. You would need to find a motherboard that has socket AM2 to use that CPU.

Jan 09, 2014 | AMD 2.1GHz Phenom X3 Tri-Core 8450 AM2+...

1 Answer

Toshiba L675D-S7014 CPU Upgrade

From what i can tell you can use

AMD Phenom II X940

Jun 21, 2013 | Toshiba Computers & Internet

1 Answer

I have a HP running a AMD Phenom 9650 Is there a compatible CPU upgrade?

Dec 15, 2012 | AMD Computers & Internet

1 Answer

System hangs up frequently

Might be a loose RAM (memory stick). Try removing it and then connect it again properly and see if it solves the Problem.

Jul 12, 2009 | Intel Pentium Dual-core Processor E5200...

1 Answer

Push the on button and nothing happens

I believe you are using a new power supply now.
Before you start, first check if your Power button is OK.

To do this, first unplug the power cord from your PC.

Remove POWER-Button connector (with black/white or blue/white wires) from you Motherboard
Remove RESET-Button connector (with black/white or blue/white wires) and put it on the place of POWER-Button. (polarity for these buttons is not important)
Plug the power cord back and press RESET.
Does it change things ?
If it starts, then your Power-Button is broken.

If not, remove the power cord and then put te POWER-Button and RESET-Button on their places on the Motherboard.

Now do the following:
(please remember the position and polarity of all cables/items you remove/unplug, Use Digital camera if necessary). Be patient, don't hurry!
- Unplug the power cord.
- Press power button few times (power cord is unplugged).
- Remove the Battery.
- Unplug the Monitor cable and remove VGA card.
- Remove RAM module(s).
- REMOVE any PCI cards(Modem. Lan, Audio etc.).
- Unplug any HDD/FDD/DVD cables from the Motherboard.
- Unplug Power from all your HDD/FDD/DVD devices.


- Put the batery back (be careful to the polarity)
- Put the Computer power cord
- Turn on your PC.

Is the Processor Cooler running ?
Are there Beeps from PC Speaker?

If not, then your Motherboard is broken !

If there are some beeps, then your Motherboard is OK, but some component(s) is broken.
Turn Off your PC by pressing the Power button for about 4 sec.
Unplug the power cord and press Power button few times.
Put your VGA back, and connect the monitor cable, too.
Put back ONLY ONE memory module (if there are more).
Connect the Power cord and press Power button.

Do you have a picture now ?
Are there Beeps from PC Speaker?

If you have a picture, put back all other memory modules and PCI cards, connect Data and Power cables to your HDD/FDD/DVD units, but ONE at TIME.
Do not connect and put everything back all at once!
After each change, see if there is a Pcture and (one) beep.
It needs some time but that's how you will detect which device/cable is maybe broken!
And remember:
Before you do any change, AALLWAYS do that with power cord unplugged and power button few times pressed !!!
If there are Beeps, try another memory module.

Again if there are still beeps, you have problem either with your RAM or VGA.
If there are infinite long beeps, than it is your RAM.
If there is one long and many (8) short beeps, then it is your VGA

Replace it!


Mar 23, 2009 | HP Computers & Internet

1 Answer

My comp running slow after overclocking ..

As a general rule, one of the following may be happening:

Loose CPU/Heatink not tightened enough

If in changing this unit, you unseated your CPU, then clean it off and reseat it again with Artic Silver. Those clamps on this board are hard to get clear down and snapped in properly, so make sure that the CPU is seated clear down in and the heatsink is TIGHTLY clamped in. Oh, being too tight can be as bad as not tight enough, so check that also.

Double check your temps immediately when the thing fires up (look at probe for not only beginning temps, but over a timeline to see what is happening.

Do the same with your power supply with the probe program.

Remove one stick of memory and try it (check manual, because with that board it is NOT dimm 0 or dimm 1 when running one stick)

Make sure you have the Video card seated clear down and have the extra video power plug connected firmly to the video card. If it were mine, I would reseat it.

Make sure your CPU/Heatsink fan is connected properly to the motherboad...same number of pins as your old one, connected the same way.

I would try again to clear the CMOS to see if that helps. I know, you did it, but try it again leaving it open for about ten minutes before you put it back and try it.

Mar 18, 2009 | Intel Computers & Internet

1 Answer

I installed a AMD Phenom(tm) 9950 Quad-Core Processor which runs at a speed of 2.6 ghz but windows xp pro is only reading it at 1.3 ghz. I also have 4 gigs of ram but windows xp is only reading 2.75. The...

There seems to be some sort of incompatibility issue between your motherboard and the Phenom, or maybe some option is not enabled in the motherboard bios that windows is only sensing half of the GHz, like if the processor is only running 2 cores instead of 4.

About the memory diference, that same problem is because the 64bit difference. Unless you have a 64bit XP you won't see the full 4GB. Windows XP is limited to 3 or 3.5GB of ram it can use, you are showing 2.75 maybe because some video board is integrated in your motherboard and it may be borrowing an extra 0.25GB from the 3GB that are usable under windows XP 32bit OS.

Please comment what motherboard you have, since the cpu alone can't be blamed nor configured.

Jan 03, 2009 | AMD Phenom X4 9750 Quad Core Processor...

1 Answer

Which is a better processor?

The AMD Phenom x4 is actually cheaper with 4 cpu cores compaired to Core 2 duo which has 2 cpu cores, you will get a better deal for less money on a AMD x4.

Heres a chart you can look at,817.html

I just got myself the AMD Phenom 9650 for 150usd
The core 2 duo e6600, which I would recommend from the core duo series costs around 200 usd.

Note that the Duo only has 2 cpu cores. You get double the power on a phenom 4x with 4 cpu cores
So the phenom is definitely the best choise! (double the power for 50usd less)

Anything else?

Nov 19, 2008 | Computers & Internet

Not finding what you are looking for?
Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

2598 Answers


Level 3 Expert

761 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides