Question about Projection Televisions

1 Answer

Please help. i had got his request from a premium customer. i am confused with his problem. i want to request you to help him out in this issue. ORIGINAL PREMIUM PROBLEM: Generic problem for all Projection Televisions I have a phillips 60pp9100d that has no picture or sound. I keepsflashing I2c bus error. I have resoldered the flyback connections andanything else that looked suspect. After turning the tv back on I getthe same result,I can hear the flyback powering up as before but thatsit. Do I need to proceded with replacing the Ic chips or go in anotherdirection? REQUEST PROBLEM: The guy I got this tv from said he pluged in the s-video on the backand the screen rolled twice and then it lost picture and sound. The "onbutton" when activated would flash in the beginning 2 times,which thisis the error code for "no horizontal flyback protection. It has notshown that code anymore. It now flashes 6 times when the power buttonis activated which is A"general I2c error main I2c bus". I do not havepicture or sound. The main board has power and has had all solderjoints resoldered.I have a service manual for this model and I waswondering if ic chip Mc44603a would be the next step in diagnosing thisproblem. The pin connections diagram leads me to believe that thiscontrols current to the power transformer. This is labeled as (ic7302)on the schematic if you have access to one. I have ordered various icchips for this model in hopes of someone pointing me in the rightdirrection.Thanks http://www.fixya.com/support/t826120-phillips_60pp9100_problems THANK YOU

Posted by on

  • dewan nafees ahmed Jul 24, 2008

    thanks for the reply brother.

    i have posted your solution for that customer.

    i will get back to you with his comments.

    thank you once again


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Projection T... Master
  • 8,617 Answers

IC7302 should be checked for in and out voltages to see is its the IC istself that is at fault or possibly a leaky diode after or before the IC. Checking pin voltages will be the only way to track the problem down and isolate exactly whats happening. If you need more assistance please let me know

Posted on Jul 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i fix white dots on samsung tv hl-t6176s


Samsung is replacing this free of charge.
Dear Samsung Customer,

We apologize for the inconvenience you have experienced with your Samsung product.

Your request for service has been forwarded to an Authorized Samsung Service Center who will be in touch with you shortly and is tentatively set for an appointment on Feb 15, 2013 AM time window.

You can get real time repair status by one of the following options: You can also Chat with one of our agents to follow up with your service request.

Thank you for being a Samsung Customer

Sincerely,
Rajiv Mehta
V.P. Samsung Service Operations


Help make your service process smoother. Upload a picture or video of the issue you are experiencing by clicking here.





Service Type : Repair Warranty : Labor (08/31/2008), Part (08/31/2008)
Product Information
Model Number : HLT6176SX/XAA Serial Number : B32T3CKP601351Y Product Symptoms : Quality/Trouble/Video&Image/Multiple white dot on screen

Oct 13, 2011 | Samsung DLP HL-P4663W 46" Rear Projection...

2 Answers

It has blue spots (pixels) around the edges. There is a egg shaped center that does not have it, all other places do. It stays on the entire time, even after turning off the TV, until the lamp goes off....


Hello
This is really a problem to some Mitsubishi projection TVs.

This LCD Projection Television uses three LCD panels to create the screen image. This technology creates the image using small dots, or picture

elements (pixels). Your LCD Projection TV is manufactured to a high level of performance and quality, in fact, 99.99% perfect in the number of

properly functioning pixels. As in other display technology, sometimes a pixel is continuously active, inactive or the incorrect color. Our standard is
clear; MDEA warrants only that the percentage of properly functioning pixels will be not less than 99.99% of all pixels.
This is the company says about this problem. Your set need service care fro authorised service center.

BEFORE REQUESTING SERVICE, please review the instruction booklet to insure proper installation and correct customer control
adjustment. If the problem persists please arrange for warranty service

Sep 29, 2011 | Mitsubishi WD52527 52" Projection HDTV

1 Answer

I would like a refund since I ended up returning the pc since the help I received didn't work


Write an email to customer service of fixya.com for refund, email address is as follows..
premium.support@fixya.com
OR submit refund request HERE

Jul 09, 2011 | Projection Televisions

1 Answer

Hi I pressed the wrong button turning the TV on, now I have no sound and can't get it back. please help.


Hi,

SAP (Second Audio Program) may be turned on. This used to be a widespread RCA problem maybe caused by incorrect conversion of analog signals for viewing as phony HD images. Costly class action lawsuits addressed the problem in USA. Most of the specific equipment causing the problem used by broadcast/production/satellite industries was either adjusted correctly or replaced. If the problem re-occurs, it may caused by specific TV channels or programs that you watch. Codes inserted in the signal are incorrect and confusing the RCA TV Guide and audio processing circuits. The error causes SAP to be incorrectly selected as default for all channels.

Remedies:

Change audio settings in customer adjust menu to Stereo from SAP. Sometimes the On screen TV Guide set-up must be cleared of location, etc., and set-up again.

Sometimes it is difficult to set correctly. Unplug TV for 12-24 hours and TV may reset to default stereo setting instead of SAP.

This was an active Class Action legal issue 10-15 years ago in the USA.

easyab

Feb 23, 2011 | RCA Projection Televisions

2 Answers

Model HLT6176S white dots on screen


you need to replace DLP chip to correct this issue.

Dec 18, 2010 | Samsung 61" Slim-Depth DLP HDTV

1 Answer

Locked on `paperjam


I do not need the premium plan . please understand. I DO NOT HAVE A TV PROBLEM.
my request was for a problem with a canon printer . your suggestions were of no help . it is now in the hands of a repair shop. I trust that you will not charge
for the uncuccessful attempt .
Edward.

Oct 02, 2008 | Projection Televisions

1 Answer

Manual


You can email Toshiba customer support at customer_support@tacp.com or fax a request to 615-444-0630 and they can get you the manual you need...
Bill

William Rayburn, CET
Premium Technologies
PO Box 442
Long Beach, WA. 98631
360-642-4993

Sep 24, 2008 | Toshiba 42H81 42" Rear Projection...

1 Answer

Blank scree


Go into your customer menu and turn off your closed caption...
Bill

William Rayburn, CET
Premium Technologies
PO Box 442
Long Beach, WA. 98631
360-642-4993
premtech@willapabay.org

Sep 15, 2008 | Samsung HLN437W 43" Rear Projection HDTV

1 Answer

Projection TV Expert Needed


I just posted a response for the Toshiba. If that doesnt help I will assist them to trouble shoot and get the set operating again. That other expert should be banned from here.

Jun 29, 2008 | Toshiba 61HX70 61" Rear Projection...

2 Answers

I have a Polaroid flat screen LCD TV model number TLS 015 11B, but have lost the user manual. Can you help me please?


You have two choices purchase it from the internet, or (the best) contact the manufacture, they will sometimes send it to you at no cost, if you call customer service and if you express you concern.

Jun 01, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...