Question about ViewSonic VP930b 19" LCD Monitor

Open Question

Monitor does not display no signal when PC starts up.. black screen but green monitor led lamb is working

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dodgecharger
  • 254 Answers

SOURCE: monitor doesn't work

I'd try this monitor on a spare computer. It sounds like the video card (motherboard integrated or otherwise)is not putting out any video information or missing sync signals. The monitor must receive these signals or it will go into standy/sleep mode. If the computer has integrated (on motherboard) video, check your bios settings to see if it is properly enabled. If it has a slot video board, then try a different video board. Your present board might be dead. Another possibility is a bad cable connection. check the connectors for bent pins. Assuming the connector is the standard HDB-15, it is easy to bend a pin over.

Posted on May 30, 2007

  • 1 Answer

SOURCE: Monitor flashes image for split second then goes blank but green LED flashes as well

while the monitor is still powered on, but with the LED flashing, unplug the monitor from the PC. press the power button, and the monitor should go off, now plug the pc back into the monitor. Turn the monitor back on and it should work.

Occasionally this will not work for me, but if I repeat it it normally works

Hope this helps - my problem is intermitant so it may be different to what u guys have

Posted on May 06, 2008

russolini
  • 47 Answers

SOURCE: Benq FP937s Monitor - no display

Usually this type of problem is due to a faulty electrolytic capacitor on the monitor's power supply board or the inverter board that powers the backlight lamps. If you have a soldering iron and some technical skill it's possible to repair this yourself, if you can determine the bad component. Look for a capacitor with a domed top, or what looks like corrosion or leaked fluid on the top. If you replace the capacitor with one of the same rating and type (in volts and microfarads (uf)) it may fix the problem.

The backlights are usually not the problem in this case, I've fixed dozens of monitors and it has always been a faulty capacitor.

If you are willing to try this, there are lots of resources on the internet that will provide instructions for how to do this. Replacment capacitors can be purchased (usually $0.50 or $1 each) from many electronics suppliers and on eBay.

Good luck, happy repairing!

Posted on Jun 10, 2008

SOURCE: No display, green light on ViewSonic VP201b 20.1 LCD

I have two broken VP201 monitors with different symptoms. One was black screen green light - like yours. The other was purple speks flying all over the screen., purple tint.

I swapped the power supplies and display boards, both monitors had original problems. I swap the inverters and the monitor which was black screen now appeared to work okay - but slightly pink and the monitor which was purple speks is now black screen.

I would therefore assume that both my inverters gone, one being on it's way out. You probably have the black-screen case.

Posted on Aug 27, 2008

Fix-4U
  • 293 Answers

SOURCE: black screen, blinking power light, no signal

Hi...there,
It's seems you got a defective DVI card. Try using a VGA cable instead. Have nice day!

Posted on Sep 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Dealing with a Planar PL1700-BK computer monitor. When power is supplied, the "no signal" box flashes, then the screen goes black. When hooked to laptop, screen shows desktop, then goes black.


Planar PL LCD Monitor Fix - MarsBox.com

marsbox.com > Blog > Howtos
Nov 3, 2008 - Planar PL LCD monitor has flashing power led with no image. ... You will know it worked if the monitor diplays "No Signal" message when ...

What is the method to reset the Planar 1910m monitor?

superuser.com/.../what-is-the-method-to-reset-the-planar-1910m-monitor
Apr 6, 2010 - My monitor (a Planar, apparently model number PL1910M) is not working. (It is flashing a green / orange sequence which I believe to be an error code. The sequence, in ... I wasn't even seeing a "no signal" message and I couldn't turn it off using the power button. ... Computer resets when put under load.

ViewSonic VX922 monitor - black screen - green power light flashes ...

www.tomshardware.com > Forum > Displays

Tom's Hardware Guide
Feb 1, 2008 - 50 posts - ‎27 authors
Repair ViewSonic VX924 LCD Monitor Blinking Green power Button ... cant switch back & forth to desktop out of some games without the monitor going .... Nothing else on the board looks bad, the power supply board is dark brown ... to this madness we are unfortunantly dealing with daily with our monitors.Missing: planar ‎pl1700

Jan 05, 2016 | Planar PL1700 17" Flat Panel LCD Monitor

1 Answer

Does not turn on


Hello

With any monitor, check the following to determine if the issue is MONITOR related or COMPUTER related.

1. Verify the monitor is receiving power - use a known good power outlet and plug it into the monitor

2. Samsung monitors have a light on the power button - are you getting any color light from this? Orange means it is in "stand by" mode and is waiting for the PC to send it a signal. Green means the monitor is getting a signal from the PC and the monitor is on.

3. With the monitor on, press the buttons on the monitor to bring up the OSD (on screen display) that changes the monitor settings. If you have a green light on the power button and press one of these buttons (AUTO works best), this will display the monitor adjustment options on the screen.

If you see the on screen adjustments, your monitor is working and the issue may be with your PC. Move the monitor to another PC and verify the monitor is working correctly.

IF you don't see anything on the screen and the power light is green, the monitor has failed.

This could be the lights that illuminate the screen have failed (something that happened to my Samsung Syncmaster monitors after about 6 years of use) or the screen has stopped functioning. In either case, replacement parts are hard to find and a monitor swap is likely.

Nov 03, 2013 | Samsung SyncMaster S22B150N - LED monitor...

3 Answers

I have the VE278Q which is connected by display port, every time i turn off my computer and then turn it back on the monitor can't be found, I have to unplug the display port cable, unplug the monitor,...


when you say monitor can't be found did you mean the monitor has no reactions when you turn on your pc?

here are some test you may need to do to know which part is faulty
1. Turn on your computer, did it display the monitor's logo on screen? When it does monitor is good, when only blank screen it could be the vga cable or the video card.
2. See if the led indication lit. When it lit to steady green, it's good signal is coming in from the video card. It should be followed by screen display. If no display it could be the backlight inverter lamp busted or faulty inverter board. When lit green then turns red, no signal coming from the video card. Check vga cable if fix properly to both monitor and video card. Or may need to reseat properly connection of video card from the motherboard. If no led indication lamp, then monitor is dead. Check ac power cord for continuity using multitester. Check power supply section in the monitor, replaced bulged or blown capacitor with exact value, this components were the first to get affected when lcd monitor failed o turn on.
3. When computer was turned on got display and then monitor turns black, go check the vga cable, Fix the connection properly or may need to replace it with new one.
4. When no signal appears or display blank screen after logo, then check video card. First remedy is to disconnect it the reseat properly to the motherboard. If this have no effect change your video card.

go follow these steps and let me know which is closely to your problem so I can give you a good advise.

Jan 30, 2011 | ASUS LCD Monitor

2 Answers

Monitor receiving signal, but no image


Hello!

I see many monitor with that trouble.
When you turn on comp., you can have a picture on monitor about 10-30 min. and that go in black screen, or If you change resolution again go in black screen.
You must repair monitor or bay another.

Nov 02, 2009 | Acer AL2416W Monitor

1 Answer

I have an 786...The Led lamp on front starts green and goes yellow then after few seconds and screen stays black. Signal is ok.pc works with other tfts...has anyone an idea or similar problem ?


Connect another monitor to your PC. Set the screen resolution to a lower value and click OK. Shut down the PC. Connect 786 to your PC and boot the PC. Does that solve your problem?

Jul 13, 2009 | IBM T 86 18.1 in. Flat Panel LCD Monitor

1 Answer

COMPAQ PRESARIO DESKTOP PC SR1215IL. When switched on, cpu boots normal but no display on monitor. instead a sharp and bright blue vertical line appears for few seconds on the middle of screen. led of the...


tricky!! oh hi im Dyanne.. a totally unresponsive black screen can be th result of failure of th LCD or LCD inverter.( a specialized piece of electronics that energize th screen) to rule out th failure of th video display adapter or circuitry, try plugging in an external monitor..a standard pc monitor.. attached direct to th lappy. if it works, (as i susopect) th motherboard and video display are both working ok and its th LCD which is at fault. this can sometimes be repaired by a competent specialist. good luck xx

Dec 25, 2008 | Compaq Evo D300 PC Desktop

1 Answer

Can't find video signal


If screen says "Signal cable not connected " all the time till power led switches to Amber chances are monitor is ok and problem is with graphic card or cpu.Connect to Known working CPU and confirm that monitor is the problem.
If same problem persists on another working cpu after changing signal cable,the interface board in the monitor could be defective.
Samir

PLease rate solution and provide feedback.

Jun 09, 2008 | BenQ FP731 17" LCD Monitor

1 Answer

Mag monitor doesn't display bios post


The BIOS is sending the display information to the monitor but, when you turn your PC on, the LCD will be sleeping and it will take 1~2 seconds to wake up when receiving the display signal. The monitor is working and even if the BIOS messages aren't displayed, you can still press the correct keystrokes to get to the SETUP screen or press PAUSE in the keyboard to see what's going on in the POST.
If your LCD has a bicolor LED indicating the status (Standby/On) keep looking at it, when the LCD gets the video data, the LED turns instantly from amber to Green or blue even if the screen is still black. This way you can have an idea when the LCD gets the initial video signal and to press the keys accordingly.
Your PC will also delay the video output from the secondary video card because it's detected after the onboard card.

May 03, 2008 | Computers & Internet

1 Answer

Monitor Acer Problem


I agree it isn?t the monitor but I would suspect the video card you are connecting it to or the PC itself. Generally if a monitor doesn?t detect a video signal it will go into hibernation mode, typically displaying a no signal warning and changing the LED color from green to amber. When you start the computer is anything displaying at all? Are you sure the PC is powering up and booting?

Jul 22, 2007 | Acer AL1916W 19" LCD Monitor

Not finding what you are looking for?
ViewSonic VP930b 19" LCD Monitor Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Cindy Wells

Level 3 Expert

5105 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...