I changed phones and can not remember my password to install H560 blue tooth

0000 is the default passcode.
try it and enjoy.

Does your Laptop have Blue tooth or do your the the USB cable for your Nokia Phone?
If you have the Blue tooth power your Blue tooth device on your phone and on your laptop. go to the download software and Right Click on the software and send Via Blue tooth. It may ask for security code or password. choose any digit you like or repeat the digit on one of the device to the other.

The software is sent to your nokia phone as an SMS message. Open the message to install the software.

Hi,it all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.

When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.

After pairing both device, you detected paired, you can now use the blue tooth device with your phone.

there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).

Hope it helps..

Thanks for using fixya...

Bluetooth Motorola H560 was given as gift, but I don't know the password so it will pair with my Pantech phone. Where to get the password for it?

Most default Bluetooth Headset Passwords are 0000 or 1234

the passkey is just like a password which is a single time entry into your phone for connecting blue tooth devices in a secured way.
once you enter the passkey the phone will be able to identify and connect to your device each time you search for blue tooth devices in the phone.so please do not get annoyed, go ahead and give a passkey of your own choice(like birth date. so that you wont forget it easily since you wont use it again until you reset the phone or connect other devices).
this passkey can also be used to connect it to laptops, desktops if they have blue tooth.

also remember this passkey is used to restrict any unauthorized access to your phone.!!!
should you have any questions please write to us again.thanks for contacting fixya !

Hello

If you are referring to connecting your pone to your blue tooth device(dongle pluged into your computer?), you activate the blue tooth on your phone, plug the device into youre computer and right click on the blue tooth icon in the bottom right corner which will appear after a few seconds.

Click on ad device, your device will then search for other blue tooth devices.
Your phone must then appear.
double click on your phone, then you will be asked to enter a password. Enter anything and then next.
Your phone should now ask for a password then enter it.

Now the devices are paired.

Now just use the send via Blue Tooth function.

Hope you find this usefull.

Delete the device from the phone bluetooth menu and Reconnect the device you are connecting via bluetooth and assign new password to it
If you like the solution do vote for me
Farhan
www.senseapplied.com

Typical pairing code for PLT Voyager 510 is 0000

Yes there is a universal code. It is 0000. That is four zeros.

Hope this helps :)