I need a wiring diagram for a intertherm multi-speed air circulator model 901282

The blower should come on after ignition occurs. When the blower comes on first ignition will not be activated as the thermostat signal shows the heat is on. This happens when the blower relay is stuck in the on condition

Sounds **** a sequencer problem. As far as converting to gas. I would go with outside package gas unit. Works great and you do not have the noise. James

Intertherm is Manufactured by nordyne Inc.
Id recommend www.nordyne.com
At least they could get you to the write people that may have the info you need.

Good Luck!

I’m happy to help further over the phone at https://www.6ya.com/expert/michael_341f3f9dee622e54

Your best bet is to contact Intertherm and see if you can get the Installation/ owners guide.

I need a wiring diagram for an intertherm/nordyne gas furnase !!!

I have never heard of a variable speed Intertherm. If it has multiple wires it is likely just an adjustable fan where you can use a different lead for a different speed. Usually black is high blue is med. hi, red is low, ect. Check your wiring diagram on the furnace door. Why do you want to change the speed?

why did the wiring burn?Id have the heat exchanger inspected before rewiring.better to be safe.

Yes, the base is called a pan and it can be replace with a plastic pan, or they have a liquid whic can be poured thru standing water and seal rusted pan leaks.. >Check out Palmer Supply in OKlahoma on the web-page but if you need the plastic pan check out the company of the unit web-page! Thank-you-very-much!

i need a air conditioner wiring diagram