Question about Audio Players & Recorders

2 Answers

I would like a new stylus for Beocenter 2200

Stylus (MMC 5) Elliptical diamond 6 x17 um

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The stylus is most likely integral to the head...there are no alternate supplyers im aware of.
for my beocenter 1800 b&o asked for 250euro for a replacement.
next move i made was to buy a cheapo generic needle, scavenge the tip - wich was actually hollow, and ram im it on the broken renmant of the original one....not very hi-fi, but worked noiselessly.

Posted on Aug 03, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 58 Answers

Your best bet is going to be to go to an office supply store.

Posted on Jul 23, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

About 11 months ago I bought an Elliptical upgrade stylus for the PL-990 and it worked great. Recently, it started giving me problems. The left channel would be very distorted and also would fade in and...

Very odd! Sounds like it's not fitting in right. Are you sure that you have the right type of stylus for the cartridge? If in doubt replace the entire cartridge & Stylus. If it still plays up then it's in your amp after that course of action.

Aug 18, 2011 | Pioneer PL-990 Turntable

1 Answer

While trying to replace the needle/stylus for my turntable, the metal part (possibly called a cartridge) came out instead ... now i can put it in and will stay but it is just resting there, it feels as if...

Depending on the cartridge design the stylus is part of an assembly that typically just slides out. It will look like this if you have the original one...

The whole thing just presses in and friction is all that holds it in place. The actual stylus ("highly polished special elliptical diamond") is that little tiny point on the skinny metal piece ("thin wall aluminum alloy cantilever"). THAT part is NOT a subassembly for you to take off.

Apr 16, 2011 | Sony PS-LX300USB Turntable

1 Answer


I am not familiar with the model but a high quality turntable and tonearm needs special care.

The turntable should be adjusted to be as level as possible - the classic method uses a circular "spirit" level that has a blob of mercury instead of a bubble.

The tone arm can be moved manually but great care must be exercised especially if it is fluid damped, though it is better not to if the mechanism is functioning.

It is important the stylus tip is in good condition and the playing weight is adjusted to the required value using a stylus balance.

The correct playing weight is specified by the cartridge manufacturer and the adjustment method will be described in the instruction manual.

Dec 18, 2017 | Bang and Olufsen Beocenter 9300 Shelf...

1 Answer

Printer heads clogged on an epson stylus photo 2200. anyone know a repair facility in the philadelphia area?

I tried looking for one in the 19146 zip code but got nothing. You can contact the EPSON Connection at (800) 463-7766, Monday through Friday, between 6:00am and 6:00pm, Pacific Time, and ask a representative to do a more thorough search for your area.

Dec 08, 2009 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

Touch diamond stylus not activating phone when pulled put

when you put off back cover of diamond and stylus, look at stylus' place, there is a push sensor in the middle, try to clean it, if it is stucked

Jul 09, 2009 | HTC Touch Diamond Smartphone

1 Answer

Stylus 2200, "print test page" in menu, unclickable.

- System Preferences
- Print & Fax
- Select Epson Stylus Photo 2200
- Open Print Queue
- In the top right corner of the Queue window click the Utility button
- Epson Printer Utility will open where you can check the levels and run cleanings and nozzle checks, etc.

May 07, 2009 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

Ink was low I put a new cartridge in still says low wont print.


try reinstalling the ink. if all fails call epson for replacement ink at 562 276 1300

Jan 02, 2009 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

Print head carries printheads for the stylus 2200 and if you take look around the website you might find a video on how to do the job.

Good luck Rebecca

Dec 02, 2007 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

Philips 777 stylus force adjustment

LM15 has an elliptical stylus so 1,5 - 1,8g should be sufficient, and also dial the same number on the anti skate for elliptical stylus and go for it

Dec 02, 2007 | Philips Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

1,022 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts


Level 3 Expert

5455 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75462 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides