- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try the ACER support center in Bangladesh for warranty work
Bangalore - India Acer Customer Service Center C/O Compherals 2A Alsa Glendridge 32 Langfort Road Banglaore – 560025, India Tel: 1-800-11-6677 Fax: 91-80-22296068 cheers
They are usually identified on the hard drive itself also...look really close to the jumper area...it's very tiny.
I couldn't find that drive either. But here is another LG drive with a manual, you could try the settings this one has and hope that LG is somewhat consistent. It shouldn't damage the drive anyway...it just won't work if you have 2 drives and you have them wrong. If you put this drive in the #1 position (at the end) of the IDE cable, it will only not work if the jumpers are in slave, if they are in Master or cable select it will work. If you only have one drive, just remove the jumper, it doesn't matter at all. If you have two drives, and can't find the info, you can just keep trying till you get it right. Hope that helps.
The game will contain a file config.xml or config.inf delete it and run the game your problem will resolve. If you didn't find these files or the game does not contain the files then attached lg 24 monitor and start the game and go to option menu and in display sitting set the display at 800*600 or 1024*768 then save the setting. Now you can pug the small monitor.
Hope this will solve your problme. If this help you then mark as answer.