Question about Samsung Projection Televisions

1 Answer

Best picture settings,,for color,,contrast,,ect,,for,,Samsung hps 4273 plasma tv

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Went on line,,,,

Posted on Jul 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the best color setting for Mitsubishi WS-48515 48 in?


The menu will have some choices---if someone hit the reset it returns all of them to default levels.

You do need the Mitsubishi remote to do that--go into menu and look for custom-which is the one you can preset all to your taste---the only critical one is PICTURE which is contrast---it should never be set above 70 percent or fixed images (like games) can burn the images into the tubes this set uses.

If you do not have the owner manual let me know--I know a site that has them for free.

May 16, 2012 | Mitsubishi WS-48515 48" Rear Projection...

1 Answer

Screen dim, black has green in it, contrast and brightness = shin


Since you have replaced the Color Wheel, it sounds like you have not adjusted the Index Delay in the service menu. First reset all of the picture settings you have adjusted back to original factory settings. Then on your Samsung TV Remote and with the TV OFF, Press Mute,Power,123. This will turn on the set and put you in the Service menu. Look for the top setting and select or scroll to the OPTION setting and select and look for INDEX DELAY and select that. Once you have the Index Delay selected use the right and left buttons on the remote to adjust for a picture the has no abnormal coloring and while looking at a program adjust for when the blacks look black with no abnormal coloring. Once that is done, turn off the set then turn the set back on. Now the picture should look normal.

Apr 03, 2010 | Samsung Projection Televisions

1 Answer

Setting resolution


Reset it to colors factory setting,colors less 40%.
The picture should look good,and colors too.

Dec 26, 2009 | Projection Televisions

1 Answer

I have a RCA 42 inch 1080 HD Tv. My son decided to change my color setting. Is there a way to get the factory setting back? I have been playing with the different tint, contrast and color settings. I still...


well there is usually a tab in your pictuer adjusment screen that says reset. but if your tv doesn't have that tab i can give you a few adjustments.

first- your tint should remain neutral. so if it has a color scale of 1 to 100 it should be on 50
second- your contrast should be about 80% or what your eye likes. look at the black tones
when you are adjusting it.
third- your brightness would look good about 65% pay attention to whites in your picture
fourth- your color all depends on how your eye precieves it. so adjust it with out making the colors to
neon or too dull
fith- your sharpness should be turned down to about 15% to much gives the picture a grainy texture.
sixth- your color temp should be neutral or normal. if the tv gives numbers the selection that says 6500k is the best choice.

you could always buy a calibration disc for about $20 and that could help you even better because now you are using images targeting the individule adjustment.

you could always pay to have it profeesionally caibrated. ISF certified techs will come too your home and do all the adjusment with special color filters and light sensors to give it the best picture possible according to your room. i know best buy charges $250 for it

those are just some suggestions. and the adjustments i give you work greatest for me, so if you dont like the overall out come you can always tweek it to your eye. make sure you use a digital picture with a lot of color when your making your adjustments. i like using disneys "the incredibles"

Jan 26, 2009 | Projection Televisions

4 Answers

I own a samsung ln46a530 and need to configure it for the best picture.....any recomendatios?


If you haven't already bought a nice set of HDMI cables, go ahead and do so (just dont fall for the "gold plated" cables as they are a gimmick). Unfortunately, while we all want that HD quality, there seems to be some problems with the ln46a530 when switching from RCA to HDMI. On the bright side, they have been resolved in this forum post.

Best audio settings:
Mode: Custom
SRS TruSurround XT: On
Auto Volume: On
TV Speaker: On

attachment.php?attachmentid=107143&d=1207804513

(# of clicks):
Balance: 0
100Hz: 8 clicks right
300Hz: 8 left
1kHz: 4 left
3kHz: 3 right
10kHz: 5 right


For best picture:

Most accurate settings
(This with the mode at movie)
Backlight = 6
Contrast = 85
Brightness = 49
Sharpness = 0
Color = 50
Tint = G50/R50

DETAILED SETTINGS

Black Adjust = Off
Dynamic Contrast = Off
Gamma = 0
Color Space = Custom
Red: R33 - G0 - B0
Green: R18 - G52 - B0
Blue: R11 - G0 - B51
Yellow: R49 - G53 - B0
Cyan: R22 - G46 - B56
Magenta: R37 - G0 - B43
Flesh Tone = 0
Edge Enhancement = Off
Xycc = Off

WHITE BALANCE

R-Offset = 26
G-Offset = 25
B-Offset = 22
R-Gain = 30
G-Gain = 25
B-Gain = 25

PICTURE OPTIONS

Color Tone = Warm 2
Digital N/R = Off
HDMI Black Level = Low (actually it's disabled when playing Blu-ray)<-- set this according to your source! If you use a PC, or aPS3/Xbox360 with expanded RGB levels, you might need to set this tonormal!
Film Mode = off (disabled)
Blue Mode = Off

Energy Saving = Medium
Entertainment modes = Off



Hope this helps!!

Dec 01, 2008 | Samsung Projection Televisions

1 Answer

Hi, I have just purchased the Samsung LE37A559 tv. I have been trying to get the best colour settings brightness colour contrast tint backlight etc. Is there a optimum setting for all of these ? I am...


The problem is that everyone has a different "taste" when it comes to these settings. I like to turn the color all the way down to start with. You should (if the set is factory adjusted correctly) have a black and white picture. If it's not B&W, then there's something inside the set that needs adjusted and you should get a service call. Then I adjust brightness and contrast to get the best B&W picture. Then I turn the color up until I'm happy with the color level, then I adust tint.

Hope that helps

Geno

Jul 29, 2008 | Samsung Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...