Question about Motherboards

1 Answer

Advent monitor problem

My monitor remains blank with tennis like sounds comming from it what is the problem

Posted by on

1 Answer

The power supply is overloaded by the TXO e.g you must replace it.

Posted on Jul 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Connecting from laptop to tv wont work now. It was working fine previously


Check the display settings on your laptop to see if the external monitor output is disabled. There is usually a function key on the keyboard with a picture of a monitor on it which can be used to switch between internal & external monitors.
You may also need to try on another monitor/TV or change the HDMI lead.

Sep 27, 2012 | pcb Advent 5711 5431 Laptop M/b U41iix...

1 Answer

All the lights come on when I switch on my HP Pavillion dv9600 but the screen is blank.


DO THIS FIRST - Perform a hard reset If a PC suddenly fails to boot properly, you should perform a hard reset as the first procedure.
  1. Disconnect all peripheral devices and remove all USB devices and media cards. You want to test the computer not the accessories!
  2. Disconnect the AC power adapter, remove the battery, and then press and hold the power button for at least 15 seconds .
  3. Reconnect the AC power adapter (but do not connect the battery), Press the Power button, Look for glowing LEDs near caps lock and num lock keys, and Listen for sounds of a disk drive and fan turning.
Actions to take after performing hard reset If no error message is displayed:

If a text error message is displayed, see Troubleshooting Error Messages on a Black Screen During Startup or Boot c02076104.jpg

Black Screen with No Error Messages Connect an external monitor c02076105.gif If there is a problem with the LCD display's back light or a corrupted graphics driver, the display may appear blank but the notebook may be displaying information. Attach an external monitor to test the display. If the image displays on the external monitor, there may be a graphics driver conflict. To resolve this, turn on the computer and press f8 key, then select Enable low-resolution video . If the image displays on the LCD display in low resolution, you can download and install the latest drivers for your specific graphics driver. If there is an image on the external monitor but the notebook display remains black, contact HP for technical assistance. Disconnect all peripherals and repeat the hard reset Even though users are instructed to disconnect all peripheral devices from the notebook when doing a hard reset , some devices are often overlooked. c02069237.gif Double-check that all devices are disconnected including: external keyboard and mouse (wired or wireless), USB connected external drives and devices, thumb drives and flash drives, network storage devices, PC card, SD memory cards, express card, eSata connections, firewire or similar devices, printer, scanner, camera, port replicator, or docking station, any CD/DVD from the optical disc drive, and any media from the multi-card reader.B
b52compters@gmail.com
B52computers
Chris Thrash

Jan 10, 2011 | HP Pavilion dv9500 dv9600 and dv9700 FF...

1 Answer

Blank monitor upon turning on PC


Well.... The motherboard could be dead... or check the power supply unit. Check the memory chips, see if the capacitors around the processor looks blown up (then motherboard is kaput) or make sure the monitor is properly connected to the motherboard monitor port... It could be numerous reasons ... See if the processor cooler fan is running and check if the processor's cooling paste is OK which would cause the processor to run TOO HOT and would prevent the PC to start-up etc etc....

Jul 20, 2009 | AMD M863G (M863G15CV22ARV000) Motherboard

2 Answers

Monitor des not get signals


Look for any bent pins of the mouse & keyboard cable jacks(PS2). If any key is depressed then the PC wont start-up and continue to remain blank except for the power led. If you had disconnected any wires during re-fixing your CD ROM, check them again and if possible everything else other than Monitor, Keyboard and Mouse.......sodeep.
PS: disconnect your CD-ROM (wiring only) & check the sttus too!

Mar 21, 2009 | Intel Motherboards

1 Answer

Advent 19 in monitor flickers from time to time when in use


try changing refresh rate and screen resolution of the monitor .

Dec 31, 2008 | Motherboards

1 Answer

Screen remains blank when starting up, K7S41 motherboard,


Unplug the data cable of your monitor and using a tester, check if it is carrying some electric current. If the tester doesn't show any current, try touching the pins of the data cable to make sure it doesn't give a shock on touch (do this on your own risk). If it does give some shock, you need to properly earth the monitor. So, earthing the monitor MAY solve the problem.

Good luck!

Sep 09, 2008 | Asrock K7S41 Motherboard

1 Answer

Monitor


1.Check signal cable from VGA 9 pin socket
2.Check whether the monitor gets the power
3.. set default monitor settings in the monitor menu
4. Check for proper display timing in monitor screen menu
monitor display timing 48.3KHZ, 60 HZ

Dec 20, 2007 | Motherboards

Not finding what you are looking for?
Motherboards Logo

Related Topics:

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you a Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...