Question about Video Game Consoles

1 Answer

Controller was jerked out by dog while game was playing, restarted and re inserted controller says put controller in port one and lost allsaved game

Posted by on

1 Answer

Sorry,your controller is probablly broke go to somewherelike e_bay and buy a new one. i feel real sorry for you.

Posted on Jul 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rf but no video and sound


S-Video Hookups

Note: The S-Video cables are not compatible with the redesigned Super Nintendo. They are sold separately at most retail locations as well as nintendo's Online Store.


Installation Steps:
Locate the Audio/Video inputs on the back of the TV or VCR.
Place the black end of the S-Video Cable into the S-Video IN on the back of the TV or VCR. Connect the red end of the cable to Audio IN Right.Connect the white end of the cable to the Audio IN Left. Use a slight twistingmotion when inserting the each cable and ensure the cables are firmly pressed into the input.
Connect the rectangular (gray) plug of the S-Video cable into the multi-out connector on the back of the Control Deck.
After system is connected to the TV or VCR:
Insert Game Pak fully into the Control Deck.
Plug the controller(s) into the front of the Control Deck using the left-most port for one-player games.
Plug the AC Adapter into the back of the Control Deck. Plug the other end into a wall outlet.
Set the VCR's TV/VCR button to VCR. You can put a movie in the VCR, press Play, make sure the movie appears on your TV, then press Stop. This puts your VCR into VCR mode.
Slide the Power Switch on (toward the Game Pak).
Turn on the VCR and locate the input select. It's often called: input select, AUX auxiliary), Line, Line In, Input, Source, Select, In, or EXT (external). Switch the input select to show the Nintendo game.
The game image should now be displayed on the screen. You're ready to play! To record video games, set the system up to play games as usual, then insert a video tape and press Record. It's that easy!

Dec 27, 2011 | Nintendo Super NES Console

1 Answer

How do you erase memory from the memory pak


  • Plug an N64 controller into the "Player 1" port on the Nintendo 64.
  • 2 Place the N64 Controller Pack into the memory card slot on the Nintendo 64 controller.
  • 3 Insert a Nintendo 64 game into the cartridge slot on the N64.
  • 4 Hold down "Start" on the N64 controller.
  • 5 Turn the Nintendo 64 on via the "Power" switch on the device. After the console loads, the Controller Pack menu will appear on the screen.
  • 6 Release the "Start" button on the N64 controller.
  • 7 Browse through the saves listed, using the N64 controller's directional pad.
  • 8 Highlight the game you want to erase.
  • 9 Select the "Delete" option. The pages that were occupied by the game save will be erased from the Controller Pack.
  • 10 Repeat Steps 7 though 9 until you're finished erasing pages on the Controller Pak. Restart the N64 if you wish to play the game that was inserted into the device, or turn the Nintendo 64 off if you are done using the console.


  • Read more: How to Erase Pages on an N64 Controller Pack ' eHow.com http://www.ehow.com/how_6566153_erase-pages-n64-controller-pack.html#ixzz15ZouU9Pe

    Nov 17, 2010 | Nintendo 64 Console

    1 Answer

    How do i properly connect my nintendo nes sytem to my direct tv. when i use the av cables i just get a blue screen. can u give me step by step to connect correctly.


    Note: This type of connection is not possible with the newer-style NES.

    Installation Steps:

    Locate the Audio/Video inputs on the back of the TV.
    Place the yellow end of the AV cable into the Video "in" on the back of the TV. Connect the white or red end of the cable to Audio "in" ("left" or "mono"). Use a slight twisting motion when inserting each cable and ensure the cables are firmly pressed into the input.
    On the other end of the AV cable, plug the yellow end into the "Video" (yellow) input. Plug the white or red end into the "Audio" (red) input, on the back of the NES.
    After the system is connected to the TV:

    Insert the Game Pak firmly into the Control Deck.
    Plug the Controller(s) into the front of the system. Use the far left port for player one.
    Plug the AC Adapter into the back of the system . Plug the other end into a wall outlet.
    Press the Power button in on the front of the NES.
    Turn on the TV and locate the input select. It is often called: TV/Video, input select, AUX (auxiliary), Line, Line In, Input, Source, Select, In, or EXT (external). Switch the input select to show the Nintendo game.
    The game image should now be displayed on the screen. You are ready to play!
    If after following these directions you are not able to view the game (for instance, if the red power light flashes off and on), try our Troubleshooting Tips.

    Note: This type of connection is not possible with the newer-style NES.

    Installation Steps:

    Locate the Audio/Video inputs on the back of the TV.
    Place the yellow end of the AV cable into the Video "in" on the back of the VCR. Connect the white or red end of the cable to Audio "in" ("left" or "mono"). Use a slight twisting motion when inserting each cable and ensure the cables are firmly pressed into the input.
    On the other end of the AV cable, plug the yellow end into the "Video" (yellow) input. Plug the white or red end into the "Audio" (red) input, on the back of the NES.
    After system is connected to the VCR:

    Insert the Game Pak firmly into the Control Deck.
    Plug the Controller(s) into the front of the Control Deck. Use the far left port for player one.
    Plug the AC Adapter into the back of the Control Deck. Plug the other end into a wall outlet.
    Set the VCR's TV/VCR button to VCR. You can put a movie in the VCR, press play, make sure you see the movie on the TV, then press stop. This puts your VCR into VCR mode.
    Turn on the NES by pressing the Power button on the front of the Control Deck.
    Turn on the VCR and locate the input select. It is often called: input select, AUX (auxiliary), Line, Line In, Input, Source, Select, In, or EXT (external). Switch the input select to show the Nintendo game.
    The Game image should now be displayed on the screen.
    Recording Game Play

    Set up the NES to play a game.
    Insert a videotape and press Record. You can now tape your video game playing for posterity!
    If after following these directions you are not able to view the game (for instance, if the red power light flashes off and on), try our Troubleshooting Tips.

    Sep 06, 2010 | Nintendo NES Console

    7 Answers

    Freezes,deletes,skips back


    hmmm. this is tricky, but return the game, or go to jb hifi

    May 24, 2009 | Nintendo DS Lite Console

    1 Answer

    Error on Game screen


    U UNPLUGGED THE SECON CONTROLLER SO PLUG IT BACK IN DUH

    Jun 30, 2008 | Sony PlayStation 2 (PS2) Console

    4 Answers

    Wii/Gamecube game


    Yes you can play gamecube games with no emulators. The memory card slots and controller ports are located on top.

    Dec 06, 2007 | Nintendo Wii Console

    1 Answer

    Ps 2 chipped


    I have also envountered problems with dogs life, my only reasonable explination is:

     

    dogs life is most propably written on a normal CD-R,

    and sometimes a chipped PS2 struggles to read CD-R games, you will also find that older PSX games wont work either, hope this is of some help.

     

    have a blessed day.

     

    :-)

    Oct 12, 2007 | Sony PlayStation 2 (PS2) Console

    Not finding what you are looking for?
    Video Game Consoles Logo

    Related Topics:

    113 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Video Game Consoles Experts

    Iron
    Iron

    Level 3 Expert

    3018 Answers

    Troy Gorman
    Troy Gorman

    Level 3 Expert

    508 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Are you a Video Game Console Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...