Question about Admiral AAV7000A

1 Answer

Admiral Designer Series Super Capacity Washing Machine

I have an Admiral Designer Series 22 gallon 2 Speed Super Capacity belt driven washing machine that I bought used without a manual or, apparently, a serial number to identify the exact model.
This washer will not drain or spin so at the end of a cycle, there is still a tub full of dirty water and a load of dirty clothes. We have tried washing smaller loads and still have the same results. We have checked the lid switch which still makes the clicking noise as it's supposed to. Then we checked the hoses for blockage but found nothing. When we lowered the drain hose to empty the tub, it easily filled a bucket a couple of times which proves no blockage within the hoses themselves. We looked at the belt under the washer and it appears to be practically new. When moving the pulleys, they will move freely in one direction and we can see the fins move inside the pump. When moving in the other direction, it will move only about 6 inches before it won't move anymore. I see no "soot" around the transmission and the washer itself makes no unusual noises. In fact, once it reaches the drain or spin part of a cycle, there is no noise at all. However, it will agitate and fill properly. We have yet to test the other switches but we'd like an idea of where to find the other switches and a possible solution.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

This machine will rotate the motor to agitate in one direction and then reverse to activate the pump and the clutch for spin. I would remove the inspection plate and watch the motor and pump in action in both wash and spin, go to www.apdepot.com and dig around you will find parts and a wire schematic on this machine.

Posted on Oct 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many gallons of water does a Kenmore series 80 model 110 extra capacity plus washing machine hold at max and at 1/2 max


The Series 80 washer has a max capacity of 20 gallons. At the lowest water level setting you would have between 14.5 and 15 gallons.

Dec 23, 2014 | Kenmore Washing Machines

1 Answer

I have an Admiral Heavy Duty Super Capacity 2 speed washer. It works great except that it takes forever to fill (3hrs!). I've taken to filling by hose each cycle. Am in a rental so don't have the...


low water pressure..... stopped up or kinked up water inlet hoses.......stopped up water fauset at machine......stopped water filter,s at machine ,,, or at water valve.......or bad elec water valve at machine

Mar 16, 2011 | Maytag Washing Machines

1 Answer

I have an admiral heavy duty super capacity plus 2 speed. I hear a grinding sound when the washer is washing whats the problem?


load lite, and if the problem still is there let run empty a couple of times, if there is still a problem it is off track and a professional needs to go inside of it you can do it yourself but not recommended so call a pro!!!

Apr 21, 2010 | Admiral AW22 Top Load Washer

1 Answer

Washer stops at the spin cycle and won't drain


check your lidswitch. do you hear it clicking when you raise and lower the lid.

Dec 10, 2009 | Admiral AW22 Top Load Washer

1 Answer

I need another timer for my admiral washing machine designer series


You can find one at www.partselect.com for $84.30 Part# PS2018043

Are you sure you need a timer. If you would like for me to try to diagnose the problem with your unit I'll be glad to give it a shot.

Oct 27, 2009 | Admiral AAV7000A

1 Answer

Admiral washing machine no cold water


HI, this is a faulty inlet valve assembly. you should replace this failing component asap if possible.This will fix the issue.

Jun 22, 2009 | Admiral Washing Machines

1 Answer

Water leaks under machine


Hi, * Inspect the water supply connections * Inspect the drain hose * Inspect the water pump * Inspect outer tub for cracks or corrosion * Inspect the tub seal * Inspect the tub bearing Pls rate my solution...

Mar 02, 2009 | Admiral AW22 Top Load Washer

1 Answer

Admiral Washer not spinning


broken or slipping drive belt, ( motor) to spin pulley , losse pulley, defitive drive clutch, spin brake fails to release, or transmission is frozzen

Jul 07, 2008 | Admiral AW22 Top Load Washer

1 Answer

Removing motor to replace belt for agitator


first unplug washer then there are 4 half inch bolts on the motor holding it to the frame take those out unplug the motor harness. then twist it out you may have to take the hoses off. then there are 3 torxs screws in the pump take them out and put new belt on same way you took off and then reverse the steps and you will be ok

Jan 30, 2008 | Amana NAV8805EWW 3.3 Cu. Ft. Elustra Tub...

Not finding what you are looking for?
Admiral AAV7000A Logo

1,263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Admiral Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Brad Brown

Level 3 Expert

13542 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you an Admiral Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...