Question about Logitech LX 300 Keyboard/Mouse

1 Answer

Print Screen Button not working

I cant seem to get my Print Screen button to work. Is there some "special" thing I am suppose to be doing to get it to work?

Posted by on

  • Bhuvanshu Srivastava
    Bhuvanshu Srivastava May 11, 2010

    how do you do it? by pressing the print Scrn Button on the keyboard?

×

1 Answer

Yes, there is a button, up by the function buttons, that says "print screen". I've tried pressing just that button; pressing that button and the alt button together; and pressing the "Mode F" button and the print screen button together, but nothing seems to work

Posted on Jul 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant get print screen to work by pressing print screen button


Pressing the print screen button does not actually print the screen to the printer. It copies it. Open WORD or PAINT and "paste" it. You can then actually print it

Feb 06, 2011 | Dell 0Y3740 Keyboard

1 Answer

How do i print screen on my hp g61 notebook/laptop because the print screen button is under a home button. the abrveation for it is 'prt sc' which i kknow means print screen but i tried everything and it...


To access the Print Screen Button you have to hold the key marked FN down while doing so. This accesses the special character/Function Set that is built into the computer.

Jan 12, 2011 | HP Pavilion G61336NR Notebook

1 Answer

I need to replace the lid switch in my gateway 7510 GX or else simply disable it. I removed the button that gets pressed but seems the circuit is already messed up, and I need to mess with it every time I...


Try this, go to Control Panel, open "Power Options" and on the left pane, click "when I close the lid...." or similar options for Lid and and choose "Do nothing" on both the options available on "Close Lid" menu. Save the settings and try whether this helps or not.
(you can go to the power options by right-clicking the desktop, select "Properties" then to "Screen Save" [XP] or to "Power" tab.)
Good luck.

Thanks for using FixYa.

Aug 23, 2010 | Gateway 7510GX Notebook

3 Answers

Print screen doesn´t work


If the print screen button doesn't work, try to use Alt + Print Screen. If that doesn't work either, then try to re-install the software that came with your keyboard (if there is).

However, for most multi-media keyboards and mice, the CD that comes with them usually made to program the special buttons only. But I'm not sure in your case. There could be an option for you to re-program the buttons on your end, including the Print Screen button.

But if there's no way to re-program it and the Alt + Print Screen didn't help, then you may want to send the keyboard to the reseller or manufacturer for repair. It's a hardware defect.

Thank you and good luck!

Jul 04, 2010 | Logitech EX100 967499-0403 Keyboard

1 Answer

Error 0xc18a0301 - "Ink system has failed" on a Photosmart 6180


Error number 0xc18a0301 on HP printers Follow the below steps on the front panel of the All-in-One printer:
A. - Press and Hold the “Print Photos” & “Red Eye Removal” buttons. Release both buttons. Display should say “Enter Special Key Combo”
B. - Press and release in sequence “Red Eye Removal”, “Print Photos”, “Red Eye Removal”
Display says "enter special key combo"
Press and release in sequence “Red Eye Removal”, “Print Photos”, “Red Eye Removal” .

If "support COxxFN0723BR" appears with "uiaux" message, perform the below steps:
2. Press and release the right arrow button until the display says “System Configuration Menu”. (on C8100 use Touch Screen)
3. Press and release the “OK” button.
4. Display should say “Hardware failure status”. If not there already, Arrow Key over to “Hardware failure status.
5. Press and release the “OK” button
6. Display should say “Hardware failure status: Clear. Press OK to clear”.
7. Press and release the “OK” Button. Message changes to “Hardware failure status Cleared. Press Cancel to continue”.
8. Press and release the “CANCEL” button as many times as necessary, so that, either the “Welcome to Photosmart Express” screen appears, or, the “Ink System Failure” screen appears. PLEASE DO NOT TRY TO PRINT AT THIS STAGE.
9. Using the Power Button, turn the unit OFF and unplug the power cable from back of the printer and wall outlet.
10. Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first and then into the back of the printer
11. Turn the unit on. The printer may display message “USE POWER BUTTON TO SHUTDOWN THE PRINTER” followed by “PRESS OK TO CONTINUE”. Press OK.
12. If the printer has already initialized, then go to the next step. If not, the printer will start the “ONE TIME INK INITIALIZATION PROCESS”. Allow this process to complete and do not interrupt. Once the initialization process is complete, the printer will print out a Diagnostic Page.
13. To verify printer functionality print a SELF TEST PAGE.

Aug 28, 2009 | HP Photosmart D7160 InkJet Printer

1 Answer

Cannot print received faxes


I am going to send you several things. Check all of these,
There will be directions on Secure fax, it should be disabled, Delay fax , disable, how to print out a secure fax from memory. You want ECM mode to be ON, and please TURN OFF junk fax. Here are the steps, it will be in several posts.
First secure fax. I doubt you have a password.
Know what, I just thought of this. In order, press "menu #1934. You will enter the tech diagnostic mode. Press your machine status button , scroll to maintenace and perform a memory reset. In tech mode it will default items that the uses reset will not.

Now Secure fax...elem_1_spacer.gif
  1. Press the [Menu / Exit] button on the Control Panel. 'System Data' will be displayed on the Display Screen.
  2. Press the [Down] arrow button until 'System Setup' is selected, and then press the [Enter] button.
  3. Press the [Down] arrow button until 'Secure Receive' is selected.
  4. Press the [Right] arrow button to select [ON] or [OFF], and then press the [Enter] button.
  5. If 'OFF' is selected, skip to step 7. If 'ON' is selected, 'EnterPasscode' will be displayed. Enter the 4-digit passcode using thenumeric keypad, and then press the [Enter] button. 'Confirm Passcode'will be displayed.
  6. Enter the 4-digit passcode again, and then press the [Enter] button.

    NOTE: If the passcode is unknown, contact your System Administrator.

  7. Press the [Stop] button to return to the Standby mode.


Feb 25, 2009 | Xerox WorkCentre M15i Laser Printer

2 Answers

C5180 printer won't print.


I just had this problem and here's what I did (with a little help from a previous yahoo answers post)...

1. Turn printer and computer off
2. Disconnect printer from computer
3. Unplug printer completely
4. Hold power button on printer while plugging printer back into power source. Maintain holding power button in until printer cycles completely (Ihave no idea if hold it actually does anything...but I tried it and it worked)
5. Turn printer back off (which actually may happen anyway when you finally release the power button)
6. Reconnect printer back to power source and computer.
7. Power both back up.

That should do it hopefully. Also make sure your printer cartridges aren't totally out. It won't let you print if even one of them is completely empty.

Good luck.

Aug 24, 2008 | HP Photosmart C5180 All-In-One InkJet...

2 Answers

Printer wont print


what ink has failed?
please tell the exact error message

Aug 17, 2008 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

Blank screen


the power is supposed to stay on when that little plastic button is pressed(screen switch)the screen switch activates hibernate and power saving;if you press the power button a screen will open informing you what programs are currently working.by shutting down you have caused an illegal command.
hopefully if you restart in safemode then shut down correctly and restart every thing should be ok.

Mar 03, 2008 | Dell Inspiron 700M Notebook

Not finding what you are looking for?

Open Questions:

Logitech LX 300 Keyboard/Mouse Logo

Related Topics:

971 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2642 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...