Question about DCS RGS-366 Professional Gas Kitchen Range

2 Answers

Igniter will not shut off on my DCS RGS-366 gas range

When I ignite any burner the igniter continues to click away after the burner is ignited. How do i correct this?

Posted by on

  • Anonymous Sep 06, 2008

    I have the same problem. Also when I turn on one burner, the other burners start to spark

  • wojteko Sep 20, 2008

    DCS 366, 1 out of 6 igniters continue to fire after gas is on.

    Where is spark generator?



2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Replace the multipoint gas re-igniter, it is a blue unit behind the knobs. This unit detects the flame and stops the clicking. Call Fisher and Paykel (owners of DCS) at 1 888 936-7872, they sell parts for DCS. The old inferior unit is blue and has a whte label. The newer unit has a yellow label.

Posted on Nov 11, 2010

  • notsohandy9 Mar 20, 2011

    I recently replaced the igniter on my DCS 366 and everything seemed fine for a couple of days and then the clicking started again. This time we have 1 burner that doesn't click when lit while 5 are clicking when lit. If I change the order I attach the wires that correspond to the burners on the igniter, the burner that does not click changes location. I'm am wondering if I somehow I damaged the igniter and need to replace it again. Any ideas?


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

Spark generator is faulty usually - replace

Posted on Jul 23, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why doesn't oven work?

Give the repair man the opportunity to make the oven work instead of charging you for parts that probably did not need to be replaced.

Dec 01, 2015 | DCS RGS-366 Professional Gas Kitchen Range

1 Answer

All 6 igniters continue to click after any one burner is turned on

Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range Repair Burners Keep on Clicking

Apr 30, 2011 | DCS CS-366-SS Gas Cooktop

1 Answer

Igniter keeps clicking after burner lights


Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...

Gas Range Repair Burners Keep on Clicking


Aug 30, 2010 | DCS RGS-366 Professional Gas Kitchen Range

1 Answer

Oven will not turn on. the gas burners are working. i don't smell gas, however, the oven will not heat up. any suggestions? we've had this range for about 5 years, and this is the first problem we've had...

the gas oven is ignited by a small electric element that glows red at a pre-set current it opens the gas valve and ignites the gas 9/10 times its as simple as replacing the igniter. the other 1 is a gas valve or the themostat control or a board ...try the igniter first cheap "relatvily" easy and you can probably do it your self ( if you are so inclined) Good Luck turn off the gas turn off the electricity and work carefully

Oct 12, 2009 | DCS RGS-366 Professional Gas Kitchen Range

2 Answers

My oven won't heat up and just smells like gas but my stove burners work

Hello, This is going to be a problem with your igniter/glow bar. Over time these get old and although you may see it glowing iit still may be bad. Your igniter should glow a brillient yellow and should ignite the gas within 15 seconds of the valve opening. If you have any other questions or concerns please feel free to comment again...Good Luck! Mike

Aug 17, 2009 | DCS RGS-305 Professional Gas Kitchen Range

1 Answer

Dcs 48" gas range igniter comes back when set on low/simmer

This is not a solution but something to think about for troubleshooting.
On the DCS there are two ports that feed gas to the burner.
One for high flame and one for simmer.
On the DCS if the flame is snuffed out on simmer it will automatically reignite.
So if the igniter will not shut off while on simmer, the sensor is bad and is trying to reignite the burner.

May 11, 2009 | DCS 24-24G-1 Gas Kitchen Range

1 Answer

Gas burners are ticking

The ticking sound you hear is the electronic ignition which is located by each burner. When you turn a burner on the electronic ignition creates a spark which ignites the gas. Once the burner is ignited. turn the knob a bit further and the ticking will stop.

Feb 05, 2009 | DCS RGS-486GD Gas Kitchen Range

1 Answer

DCS stove igniters clicking

Actually Dave, when you turn on one burner, all of the igniters do fire. This is normal. Perhaps you never noticed it before. regards, Joe

Dec 19, 2008 | DCS RGS-486GD Gas Kitchen Range

4 Answers

Broiler not working, Oven OK

We have a DCS RG-366 SS L, a 36" gas range and the igniter went out. You could smell gas and the igniter would glow red - but no fire across the broiler.

There is a place in Michigan called We bought a replacement igniter from them and it works like a charm. It was $53 (we live close by and didn't have to have it shipped).

The item number (from the invoice) is 1191 and the box the igniter came in looks like it is manufactured by FSP, code 082005, and there is a larger number on the box that says 786324 IGNTR-OVEN.

Hope this helps.

Sep 13, 2008 | DCS RGS-305 Professional Gas Kitchen Range

Not finding what you are looking for?
DCS RGS-366 Professional Gas Kitchen Range Logo

1,477 people viewed this question

Ask a Question

Usually answered in minutes!

Top DCS Kitchen Ranges Experts

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Paul Carew

Level 3 Expert

3150 Answers

Sal De

Level 3 Expert

2694 Answers

Are you a DCS Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides