Question about Dryers

1 Answer

Tumble Dryer-empty water light won't go off

Epmty water light on Hotpoint Aquarius won't turn off.I have emptied the water.

Posted by on

  • thomas2397
    thomas2397 Oct 13, 2008

    Hotpoint aquarius water light won't turn off, even though water is empty

  • Anonymous Mar 28, 2014

    Water empty sign comes up but have emptied water and still light comes on,bleeps but doesn't start

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

Remove panel on rhs looking from back and you will see a chamber with a microswitch on top. either micrswitch is stuck, pump faulty or a lint blockage

Posted on Jul 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a tumble dryer Condensed Hotpoint Aquarius tcm570. The empty water indicator is on. I have cleared the,filters and no water was in tank. I have noticed it is taking longer to try clothes and the...


Dryer need to be clean out .
all area of lint screen down to were are comes out or fan may be blowing stripped blade on motor.
Need whole model # of dryer to quote you parts cost

Mar 01, 2015 | Hotpoint Dryers

1 Answer

Empty water light does not come on,so water overflows from drawer...what can i do?


empty it more often..............check it every hour or so.........dont rely on the light

cheers

Feb 19, 2015 | Hotpoint tcm570p Aquarius Condensor Dryer...

1 Answer

My Hotpoint condenser tumble dryer TCD980 won't dry.


hi ime not sure but some dryers have a small tank inside at bottom with a float maybe float is stuck or if it has a pump maybe not working will have one if water tank is at top of dryer

Feb 05, 2013 | Hotpoint Dryers

1 Answer

Hotpoint aquarius condenser dryer ctd00 - empty water light will not extinguish after water has been emptied resulting in no heat


The float switch within the plastic unit at base of machine has failed,shorted out Carefully prise the unit open Disconnect and identify the three tags Replace switch and attached lever Examine the insulation on the rear tags as they are very close Reinstate Red light will now extinguish pump will run when float operates hearers will come on

Oct 15, 2009 | Hotpoint Dryers

1 Answer

Hotpoint Aquarius cycle not finishing with f02 error


Dont think its pressure switch.if sticks one way machine overfills the other brings on heater with empty drum..Could be fauly rinse solonoid valve...Check with multimeter coil should read around3k ohms..good luck

Sep 29, 2009 | Hotpoint Ariston Aquarius WD420 Front Load...

1 Answer

Condenser on Hotpoint Aquarius dryer not collecting water


I think that I have already suggested some possible reasons for the prob you are experiencing with your dryer, but I don't think I have mentioned the fact that the pump could be fauty, you should be able to hear it running, just a thought , you never know.

Jan 12, 2009 | Hotpoint TDC32 Electric Dryer

1 Answer

Dryer runs no water enters condenser draw, empty water light on.


Remove the filter draw on the bottom left, and wash out under running water to flush out all fluff.
Reach inside opening and clean as much fluff anf gunge as you can from the cavity.
Get a plastic bag tie, reach and feel for a small at the rear of the compartment, and poke hole clear..
If this does not solve the prob, then it is probably a sticking or faulty float valve., or switch.
This involves a complete strip down to access these components.
Plz rate my solution.
Thanks.

Jan 09, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

3 Answers

Hotpoint condenser tumble dryer aquarius cdt00- wont dry


I am not familiar with this particular unit, but I have a condensing dryer (Malber) which pumps out the water by itself. I am guessing that your unit requires you to empty a bin manually. Even if the bin is empty, I think the unit thinks it needs to be emptied and that is why the dryer will not work to give you hot air. If you do have such a bin, it might have a weight switch which the unit uses to detect if the bin needs emptying. See if the weight switch is working. The same weight switch idea is used on dehumidifiers.

Mar 09, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

1,030 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Brad Brown

Level 3 Expert

15109 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...