Question about Rival CF153-WM Deep Fryer

1 Answer

NEED A REPLACEMENT

MY HANDLE FALL APART SO I NEED TO GET A REPLACEMENT OR A NEW BASKEY WITH THE HANDLE DO YOU KNOW HOW I CAN GET THIS PART

Posted by on

  • 2 more comments 
  • Anonymous Jul 26, 2008

    My handle fell apart on my basket and I can't use it. I need a new one so I can use my deep fryer again. Thank You, Carol Nolan

  • loopies Aug 12, 2008

    The handle on my fryer basket has broken off. I'd like to find a replacement basket so I can use it again without channel-locks.

  • Anonymous Sep 27, 2008

    I have the same problem, is there a site where I cam find a new basket?

  • meddlingkids Oct 08, 2008

    Me too! This must be a common defect. I tried Rival's web site but the few parts they had listed were for ice cream makers. Not much help.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Have you tried Rival's web site, or the parts list you got with the fryer?

Posted on Sep 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Handlebar grip needs to be replaced


Any bike shop should have those. You may have to split the bad one with a razor knife to get it off. You may want to use soapy water to make putting the new one on easier.

Mar 09, 2014 | Mongoose Maneuver Mountain Bike

1 Answer

Handle replacement


The door handle can easily be replaced on most microwave ovens by removing the inner door panel that goes around the perimeter of the glass. The following link explains how to access and replace the door handle:

http://www.fixya.com/support/r3696942-microwave_oven_door_handle_replacement

This should be a very simple repair that you can easily perform yourself.

If you have any questions, please post back and let me know. You can refer to this illustration, if you like, to assist you as well:

http://pcappliancerepair.com/model-display.php

I hope this helps you.

Mar 17, 2010 | Whirlpool GH4155XP Microwave Oven

2 Answers

I have an Easy-Flo central vac unit. The handle on the electric hose has a switch on the handle. With the switch on ''O'' in the center, it's off. On the left, is the ''I'' position. The vacuum runs but...


You can't get that apart. I repair the switches on these hoses a lot. The only way to fix it is to just get a new switch and replace it. You can get a replacement switch here:

Switch Replacement

Nov 18, 2009 | Vacuums

1 Answer

The valve you push to turn the shower on is leaking water and will not stay pushed in...HELP?


if you are talking about the type that has a button that sticks through the faceplate so that you can turn the shower on, you need to take the faceplate off, after removing the handle. Make sure you turn the water off to the valve or you will get wet. You see a hex head that the button goes through....you can remove the assembly and replace with a new one. The fall apart occasionally. Make sure you get all the pieces out before reassembly.

Oct 18, 2009 | Delta & Single Handle Shower Faucet

1 Answer

Broken Door Handle on 1998 Chevrolet C1500 PU


carefully use a screwdriver or chisel to pry the interior panel off of the door...it's thin, like an upholstered piece of hard board, held on by plastic ribbed push-studs, every so often. Those studs can be pryed out and pushed in to reinstall many times if you're careful but I did manage to break one on my truck. Of course there is also a couple of screws near the door handle as I recall but they are visible. A small piece of triangular shaped plastic must also be popped / pryed off of the forward window area. I'm drinking right now, but I think you may have to drill out a rivet to remove the old handle assembly but it is really easy, just pick a drill bit about the same diameter as the rivet and drill it till it falls apart. Install the new assembly with a pop rivet of your own. good luck

Feb 03, 2009 | 1998 Chevrolet C1500

1 Answer

Filter Queen Powerhead Not Working


is it the part where the hose connects to the wand or is where the wand connects to the power head? and what side keeps falling out. it sounds to me that its either a hose or a wand issue. unfortunatly the cord itself cannot be replaced and if the problem is a worn out connector in the hose which is possible it would require a replacement hose and if it is on the wand end it would require a new wand. either are fairly cheep on ebay. or you can possibly find one used at a local vacuum dealer. dont buy new. save yourself some money if possible.

Jul 22, 2008 | Filter Queen Majestic Canister Vacuum

1 Answer

Frigidaire Upright freezer Baskey


remove the basket sliders frome each side and install a couple of nylon washers between the slide and the side of the freezer on each side it will narrow the distance and the nylon washers will not rust

Mar 24, 2008 | Frigidaire 20 cu. ft. / 566 liter Upright...

1 Answer

Handle on oven door falling


Murray...after a DJ here in NY from the '60's!

First, why is the handle falling off? Is it loose or damaged? Most of these handles are only plastic with holes tapped in. If the holes are damaged and you can't fix them, you will have to replace. Most handles are through bolted in the door. You should be able to access those screws from the inside of the door. If not....

How do take a door apart: First locate any screws in the bottom of the door. Remove them. Open the door and remove screws from the sides and inside of door. Get help supporting the outside of the door and note that it will snap shut when you remove any weight from the door. Caution, most door glass is not well clipped in...it may come loose!!!! You may want to take pictures of the inside of the door once you open it. Once the door is apart, locate any fasteners holding the handle and attempt to tighten them. If not successful, you'll need that new handle. Get an extra set of hands to help with removal and reinstallation of that door skin. You'll need 'em!

Nov 29, 2007 | KitchenAid KESC307 Electric Kitchen Range

1 Answer

Plastic shielding and door handle broke off


You can find helpful exploded view diagrams and order parts by entering your model number here: http://tinyurl.com/gv383

 

If you don't find your model there, call the number shown on that page.

Oct 12, 2007 | Goldstar MV-1501 Microwave Oven

Not finding what you are looking for?
Rival CF153-WM Deep Fryer Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rival Kitchen Appliances - Others Experts

Ed Mac

Level 3 Expert

731 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18343 Answers

Are you a Rival Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...