Question about Lucent DSLPipe Bridge/Router

1 Answer

Can't portforward I'm trying to host a private server for an online game, but when I go to start > run > then type in cmd, enter, then ip config, I type in the IP and it shows an error page. :\

Posted by on

  • Coss May 11, 2010

    Please type out exactly what you are typing at the command prompt.

    That will tell me if you are entering the command correctly.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Identifying Your Router's IP Address
You should have now received an IP address from your router. To view your IP address information do these two steps:

  1. Start > Run then type CMD then press Enter.
  2. Then in the command prompt type ipconfig /all
If you see your network interface with a list of IP addresses(should not be all 0.0.0.0's or 169.* addresses). If you got an IPstarting with 192.168.* or 10.* you are doing great! If not, verifyconnections or reboot computer. Observe the Gateway IP Address. This is the router's IP address. It may be one of the following, test in your Web browser:
http://192.168.1.1 or http://192.168.0.1 or http://192.168.0.50 or http://10.0.0.1

Once you see a login prompt, you need to log in with the default routerlogin. Usually they are a combination of "admin" and no password or"admin" for the password and no username " or "admin" for username and"password" for the password. Alernatively, you can search Google withyour model number and it should yield you some useful information onyour router including the default login/password.

Then when you are inside it, you should go to the LAN section andenable DHCP (if it already isn't). For security you may limit theamount of addresses to the number of computers (you don't have 254computers, so why allow 254 computers addresses?). For example, I allow3 IP addresses on my network to be issued, since I have a NAS, Laptopand a Desktop.

Posted on Apr 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to find my ip address on windows 7


You can find your IP address on windows 7,by following the below steps:
1.Start->Run->cmd prompt
2.In that,just type ipconfig and then click enter
For example: It will show ip address like 74.110.208.65
If you want to find your network ip address that is provided by your ISP,visit Ip-details.com .

Mar 30, 2013 | Black Box IP Address Translator With...

Tip

Network sharing issue


In Multiwindow platform normal,sharing folder and printer is always big issue.
Error type:

ex:
\\server is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found.

This method can be used for many network error

Solution:



1)Fixing the winsock and tcp/ip .
On the run command :
for winsock run:
netsh winsock reset
to reset tcp/ip run:
netsh int ip reset c:\resetlog.txt
or
run winsock fix from www.snapfiles.com/get/winsockxpfix.html



2) Enable NetBIOS over TCP/IP
open up Network Connections, under Control Panel.
Right click on your network adapter and click on Properties.
Click on Internet Protocol (TCP/IP), then click on Properties.
Click on Advanced, and click on the WINS tab.
Even if it is set to Default, set the radio button to Enable NetBIOS over TCP/IP.
Press OK on each screen until everything’s closed.
Go back to the client machine and try again.
You should be able to connect!



3)dnsflush
Open Network Connection
Check box File & Printer sharing > ok
Disabled NIC
Enabled it back
Open CMD > ipconfig /flushdns
ipconfig/registerdns


4) Make sure windows firewall and antivirus firewall turn off

on Apr 21, 2010 | Other Network Devices

1 Answer

Pap2t can not connect to voip.ms i try to make a call in the line busy Login to Linsys web configuration: Registration State: Can't connect to login server. How can I made regis with voip server


got to start menu then write in search cmd then a dialogue box will appear then after it appears start typing 192.168.0.1 if the ip reply from your ping.you have a good connection with your touter.i its not try to check you LAN cables if it is coonected in your computer.. :)

Mar 19, 2011 | Linksys PAP2T

2 Answers

Router Problem


Go to start / run tye in the run box (cmd or (command) then in the plack screen type in ( ipconfig /all ) look for the defalt gateway that will be the ip adress you need to type in to get to the router login unless you have a complex network

Sep 21, 2009 | Black Box IP Address Translator With...

1 Answer

Computer has no ip address after I restored it please help daughter is riving me crazy.


First thing you want to do, is to make sure all the network cables are plugged into the correct devices such as your router, modem and the computer. if all is running well (everything is blinking with lights) go to your computer, open the control panel, select network connections and open it. Right click on the Local Area Connection and right click on it and select repair. Wait for about 2 mins. After that restart your PC. Try to get on the internet. If you are still not able too, you will need to go to the command prompt, you can do this by selecting start then run, type in 'cmd' and enter. You will see a windows that pops open, it should see somthing like c:\Documents and settings\john> or somthing like this. type in 'ipconfig /all' you will hopfully see a ip address and alot of other information. the ones you will need to look at is to see if your dhcp is enabled if it is then this will give you a auto ip address if it is not, you will need to get a static address from your isp. You will try to see if you can communicate with the IP address by typing in 'ping ' then the ip address. for example 'ping 192.168.1.23' if you have not packets lost, then that is a good thing. then try to ping your gateway, this will be your router ip address. you can find this ip 'Default Gateway' if you are able to ping this, you should be able to go online fine. 570081d.tif

If you are still not able to fix this please let me know and i will be more then happy to help. keiffertech@techie.com

Sep 05, 2009 | Compaq Other Network Devices

1 Answer

I can't find the IP Address on my ARRIS Router!


the ip address should be given automatically by the router but since it is asking,
in your computer go to start,run,type in cmd and hit enterm
it should open a black box in that box type in ipconfig and hit enter,
it should give u a list of result,search the one which says ip address,
if the ip address of ur computer is 192.168.1.2,then the ip address for your xbox should be 192.168.1.7,
if the ip address is different than the example i gave you just make sure that the difference between the last numbers should be 5 atleast....let me kno the ip address of your computer and i can tell what ip address u need
for the xbox...........

Jan 31, 2009 | Black Box IP Address Translator With...

1 Answer

Ip address


to get the IP address, go to any computer and open the command prompt (type CMD after clicking the run command on a Windows PC) When the command prompt opens type "ping kijiji.us" and press enter. the port will be port 80

Oct 25, 2008 | Black Box IP Address Translator With...

1 Answer

Cant find my Router ip to do Port forwarding


click on start and click on run
on run open box type in cmd and hit enter
black window will open, type in ipconfig then click on enter then look for the default gateway address, that;s the ip of your router

dont 4get to rate solution

Apr 09, 2008 | Lucent DSLPipe Bridge/Router

3 Answers

Laptop cant connect wirelessly


Hey Charlie, If you re-installed your operating system you will need to get the wireless modem driver from your dell disk. For some reason they have not included the drivers in the windows software. If you can't find it then you can go on to the Dell site(obviously on another computer) and enter your service tag and get your drivers that way.

I hope this helps

Jan 17, 2008 | Other Network Devices

1 Answer

Setting up an ELS 16 Terminal Server


Have you tried this?

Step1.

DEFINE NODE GATE1 IP (enter gateway ip here) GATEWAY ENABLE

Step 2.

INITIALIZE SERVER

Oct 11, 2007 | Equinox ELS 16 Terminal Server

Not finding what you are looking for?
Lucent DSLPipe Bridge/Router Logo

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lucent Other Network Devices Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

CheckitRight
CheckitRight

Level 3 Expert

1349 Answers

Coss

Level 3 Expert

1043 Answers

Are you a Lucent Other Network Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...