Question about Niko OTP-3211W 32 in. LCD Television

3 Answers

Niko 32" TV no screen

I have no screen on my Niko 32" LCD TV. I get sound, but no screen, what is the problem? thamks

Posted by on

  • pchisom Oct 15, 2008

    I have no picture but I have sound. Your solution was to pull the cover and check the lights, where is the cover? Do you know who services these televisions?

  • scotandyards Nov 27, 2008

    my problem is the same. I can't get the cover off ....afraid to break it ....do you have the solution?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 35 Answers

I've been working on the same TV for a while now. Will not turn on. I had no problem taking it apart. The fun is putting it back together. I try to take as many pictures during the disassembly process. Once you get the metal frame/shields, there is four main Printed Circuit Board- PCB's. I haven't fixed it yet. You have to ask yourself, self how much time do you want to put in it and how much money do you want to put in it. I have found a great website dealing with TV parts. This not a plug but the truth. ShopJimmy.shop . sometimes it's like throwing a dart. So far I placed the Power Supply / Inverter PCB still not working. Next going to replace the main PCB.


1-Main board 21VT3MB0224, 2- Audio PCB, 3- Power Supply, 4-Inverter PCB

Posted on Nov 21, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

Anyone know what the voltage is across the output of the inverter board VIT70002.00? I am getting a very low number. It is 24Volts going into the board but like .02 volts coming out on all 8 outputs. I figured this board was on 4 seperate circuits and that more then likely only one or 2 outputs would be bad. I am concerned that it may actually be the backlights. HELP!

Posted on Apr 16, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Inverter card.
p/n vit70002.00

Approx $180

The inverter card drives your cold cathode lighting.
If you pull the covers you will find all the lights out, if any of the eight legs of the inverter go out (driver transistor) the card will not work.

Howard

Posted on Aug 12, 2008

  • 2 more comments 
  • n4af Aug 12, 2008

    google vit70002.00
    sometimes you can find it cheap on ebay.
    new approx $180
    pull from working set $160


  • Billthetoolm Jan 30, 2015

    The TV's are really cheap now-a-days.

  • Billthetoolm Jan 30, 2015

    BUt if your interested in placing parts check out this place, I have order TV parts from them and had good luck.http://www.shopjimmy.com/.

  • Billthetoolm Jan 30, 2015

    check this out.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Vertical lines on my plasma tv


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 08, 2017 | Samsung Televison & Video

2 Answers

How do i fix black spots on my LG plasma tv. model 50pj350ub


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 08, 2017 | LG 50PJ350 50 HDTVReady Plasma TV

2 Answers

Sound is pinned at 100% output. Remote nor physical buttons on device are working.


If any of the buttons on the remote or tv work, then try going into the menu and turning the sound down manually.

Jan 08, 2017 | Televison & Video

1 Answer

Sharp lcd tv. Grn lite flashing, reset by unplug, vol + ch - , plug in. Tv came back on, after few mins screen goes blk, have sound. turn off and on picture back for few minutes, goes blk, snd ok.


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://electro-medical.blogspot.com/

Jan 07, 2017 | Sharp Televison & Video

1 Answer

I have an old Hitachi wall mounted TV with a diagonal locking bar. How do you release the locking bar?


If you wish to get more details, visit the site linked below. Screen faults of both Plasma and LCD screen are given with details and illustrations. http://electronicshelponline.blogspot..com/

Jan 07, 2017 | Hitachi Televison & Video

1 Answer

S/n z5qq3c5d947793y m.c un32eh4003fxza will not coming on 32 flat Tv


Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Jan 07, 2017 | Televison & Video

1 Answer

How can I fix blue dots on my Sony TV screen?


Seems like a problem with a lot of Sony TV's. Wish i could be of more help, but check this site. Your not alone! Sony LCD Rear Projection TV Problems hope this helps!

May 23, 2014 | Televison & Video

1 Answer

Devant ER 31951D remote


Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Pull up older posts. If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.
http://electro-medical.blogspot.com/

Aug 23, 2013 | Coby TF-TV3217 32 in. LCD TV

1 Answer

50" LG Plasma Screen TV does not have any sound or activity on the screen.


input correct ? eg:HDMI 1 USE MANUAL TO GET INTO SETUP MODE.go through all settings.check the contrast and brightness buttons n the TV if any on back or top.

Apr 15, 2013 | Televison & Video

12 Answers

Comcast remote code for 42in sharp aquos lcd


the 10093 code worked perfectly!!! YOU ROCK! the codes in the comcast manual dont work. i don't have an aqquos, but a regular sharp hdtv... purchased in nov '07

Dec 14, 2007 | Televison & Video

Not finding what you are looking for?
Niko OTP-3211W 32 in. LCD Television Logo

987 people viewed this question

Ask a Question

Usually answered in minutes!

Top Niko Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1640 Answers

The Knight
The Knight

Level 3 Expert

71135 Answers

Billthetoolm

Level 1 Expert

35 Answers

Are you a Niko Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...