The word ACCESS appears in the LCD and the digital camera does not respond.
Solution
If the camera appears to freeze or lock and the word ACCESS is displayed in the LCD, then a problem has occurred during the reading or writing of data on the Memory Stick® media. This could be caused by the media, or the camera itself.
Follow the steps below to troubleshoot this issue.
- Perform a power reset on the camera.
- If the issue is not resolved, turn off the camera.
- Remove the Memory Stick® media from the camera.
- Clean the metal contacts on the Memory Stick media with a soft, dry cloth or clean pencil eraser.
- Reinsert the Memory Stick media into the camera.
- Turn on the camera.
- If the issue reoccurs, turn off the camera.
- Remove the Memory Stick media from the camera.
- Insert a different Memory Stick media.
- Turn on the camera.
NOTE: If the issue does not occur with different Memory Stick media, the previous Memory Stick media may be faulty and should be discarded.
The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required. The Sony® eService Web site at
http://eservice.sony.com/ can assist you in obtaining service from a Sony Service Center or locating a Sony Authorized Servicer.
Region
Canada
Latin America
United States
Products
Cybershot Digital Still Camera
Last Modified Date: 03-04-2010ID: C267279
re memory stick not being read and camera not working after being told another adaptions is working close this first
message appears on lcd screen
sony ericsson w580i
×