Question about K-Tec Champ HP3 Work Top Blender

1 Answer

Suddenly my blender is VERY LOUD!

I have had my champ for a few years now. Suddenly it has become extremely loud. It sounds like a million gears grinding backwards. Anyone familiar with this problem

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had this happen twice before. The bearings in the blade area are going. We figured that in our dishwasher the heated water pools on the top by the bearings and as it cools water is brought in contact with the bearings and they rust. We have used penetrating oil to put a pool of oil around the bearing shaft and store it like that. Still noisy but cheaper than buying the replacement. Hand wash the blender to avoid this happening to your new one if and when you replace it.

Posted on Oct 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Shaft appears to be stripping out


they dont provide phone service but still i will try to get some info

Aug 15, 2008 | K-Tec Champ HP3 Work Top Blender

1 Answer

I have 3-year-old Kitchenaid Blender, model KSB1575CCUO. The motor started occasionally making a grinding sound, especially on high speeds, but blades still turn. Does the motor need oiling?


it could be failing bushes for the motor
take it to an appliance repair shop for an inspection of the motor to check for bush/bearing problems

Dec 10, 2016 | KitchenAid Blenders

2 Answers

Why is kitchenaid blender making loud grinding sound, only with carafe in place?


If there is no noise without the beaker it will not be the motor. The problem is in the shaft & bush that holds the chopping blade. Dismantle, clean & lube it. If that does not fix it replacement of the assemble is the only other solution

Jun 08, 2014 | KitchenAid Blenders

1 Answer

Motor leaking dark liquid


Hi, my wife and I purchased the Health master blender about 6yrs ago. I recently noticed that the liquid was leaking from the bottom of the container. The blade is totally loose. How can I tighten it if at al?

Apr 14, 2014 | Montel Williams Living Well Healthmaster...

1 Answer

Kitchenaid blender motor loud hum not working


Can you check it without the beaker on? It could be the blade seizing up, how free does it turn by hand?

Dec 02, 2012 | KitchenAid KSB560 5 Speed Blender

1 Answer

K-Tec Champ HP-3 Burning Smell and Light Smoke


That burning smell is kind of a death sentence. At least a switch or more likely coils are burnt out.

Mar 27, 2010 | K-Tec Champ HP3 Work Top Blender

2 Answers

There is a leak in the caraffe(or jar). It is at


Common issue with all of these carafe's. Once the jar starts to leak the bearings are shot and it is time to replace the jar. The bearings are non-replacable. Bad design in my opinion. I was able to get my last jar (I have been through 3 before the 5 year warranty went out) to last by hand washing and not putting it in the dishwasher, but after 4 years of use on this jar it failed too.

Nov 29, 2009 | Blendtec Extra Carafe / Jar for the Total...

2 Answers

Blender suddenly stopped working while in use, lights are on


The motor has burned out. Check with the manufacturer about warranty status for the blender or exchange it.

Jun 23, 2009 | Kenmore 204101 Single-Speed Blender

Not finding what you are looking for?
K-Tec Champ HP3 Work Top Blender Logo

Related Topics:

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top K-Tec Blenders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Don Eagan

Level 3 Expert

691 Answers

Are you a K-Tec Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...