Question about Baby Gear

3 Answers

Crib repair need all hardware

Posted by on

  • 3 more comments 
  • Anonymous Aug 04, 2008

    We just moved and are expecting our 2nd child at the end of the month and just realized that the screws got lost in the crazy process of moving.  Pleeease advise where or how we can do to replace the lost screws.


    Look forward to any helping hand.
    daphnecasanova@yahoo.com
     

  • daphnecasano Aug 04, 2008

    We just moved and are expecting our 2nd child at the end of the month and just realized that the screws got lost in the crazy process of moving.  Pleeease advise where or how we can do to replace the lost screws.


    Look forward to any helping hand.
    daphnecasanova@yahoo.com
     

  • rahomsw Aug 23, 2008

    We lost the hardware for our Delta Enterprise Astor 5-in-1 4860 crib. How can I get/buy what we need?

  • Anonymous Dec 26, 2008

    I need the screws and bolts to put my crib together.

  • liz usiskin Dec 05, 2012

    I need the hardware for a Alta baby crib Model name Mimosoa

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello, we moved and the hardware for the Delta model 4960 disappeared. Where can I buy another set so the baby is happily back in the crib???? Help. roach48@cfl.ff.com Linda

Posted on Aug 03, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 53 Answers

If you are missing any hardware, even a single bolt, please do not re-use this crib! Or any crib. According to the CPSC, most all crib related deaths (where the crib was "at fault") deal with hardware issues. They happen in cribs that have been taken apart and put back together, and many either don't have all the hardware, or parts of the original hardware has been replaced with something that isn't the exact same. Your baby's safety is too important to trust to a crib that isn't perfect. And a crib is the one place where you leave your child for periods of time.

Posted on Aug 28, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I have had this similar issue. You can try www.productsamerica.com. They are one of the only places on the net that sells replacement hardware for cribs of all kinds. They are a little pricy, but I guess you can be if you are the only one supplying the need.

You will need to call their 800 # to give them the details of your crib. 800-772-1041.

Hope this helps. Deanna

Posted on Aug 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I get the hardware for a cabinet that I received that didnt have the hardware in it?


If it was supposed to include the hardware, contact the supplier/vendor. If not, take measurement, take some pictures, and any assembly instructions to your hardware store and they can show you what you need.

Mar 20, 2017 | Hardware & Accessories

1 Answer

No audio output device is installed


That statement might be true. The audio output device is hardware. If the hardware is present, go to control panel, hardware and sound, sound, audio devices... look for audio hardware, At that point, I like to delete any devices, then go to actions, search for new hardware. If found, windows will usually know what drivers the devices need. On some PCs you need to have a driver disk with special drivers If no hardware is found, you need to go to a PC repair shop or buy a book on PC maintenance and repair...I like the book, others like the repair shops, your choice.

Oct 27, 2014 | Computers & Internet

1 Answer

Need driver for


It is not your computer that needs drivers, it is the hardware you need to connect to the operating system that needs a driver. From Windows 7 and up, Microsoft only allows drivers, if the manufacturer asked for certification and the hardware and driver and they work conform Microsofts demands. If the hardware and driver is certified the driver is also on the Microsoft website. Most of the time if you use new hardware the operating system goes to Microsoft to see if there is a correct driver and then installs the driver.
For older hardware, only few manufactures make drivers and ask certification. Most only develop drivers for their new hardware. So for older hardware there are only a few drivers. If Microsoft can't deliver drivers, or the manufacturer from the hardware can't, you are lost. The devices won't work with the new operating system. Nobody told you that before upgrading. Since I upgraded to win 7 I could not use several expensive things I was used to, like a great Logitec webcam in a sphere, a great sound card from Creative labs, with break out box and so on.

Jul 28, 2014 | HP DeskJet 3520 InkJet Printer

1 Answer

Driver whiz registration codeF9C3AEFF


It is not your computer that needs drivers, it is the hardware you need to connect to the operating system that needs a driver. From Windows 7 and up, Microsoft only allows drivers, if the manufacturer asked for certification and the hardware and driver work conform Microsofts demands. If the hardware and driver is certified the driver is also on the Microsoft website. Most of the time if you use new hardware the operating system goes to Microsoft to see if there is a correct driver and then installs the driver.
For older hardware, only few manufactures make drivers and ask certification. Most only develop drivers for their new hardware. So for older hardware there are only a few drivers. If Microsoft can't deliver drivers, or the manufacturer from the hardware can't, you are lost. The devices won't work with the new operating system. Nobody told you that before upgrading.

The only chance you have is on Canon USA. This site gives enormous support.
Success

Jul 27, 2014 | Canon Cameras

1 Answer

Driver for my VGN FS30B for portable devices


It is not your computer that needs drivers, it is the hardware you need to connect to the operating system that needs a driver. From Windows 7 and up, Microsoft only allows drivers, if the manufacturer asked for certification and the hardware and driver and they work conform Microsofts demands. If the hardware and driver is certified the driver is also on the Microsoft website. Most of the time if you use new hardware the operating system goes to Microsoft to see if there is a correct driver and then installs the driver.
For older hardware, only few manufactures make drivers and ask certification. Most only develop drivers for their new hardware. So for older hardware there are only a few drivers. If Microsoft can't deliver drivers, or the manufacturer from the hardware can't, you are lost. The devices won't work with the new operating system. Nobody told you that before upgrading.

Jul 11, 2014 | Sony VAIO VGNFS Series VGNFS30B VGNFS31B...

3 Answers

HAV PROBLAN IN PANASONIC SARVO DRIVE ERRER 21 HOW CAN I SOLV?


It is not your computer that needs drivers, it is the hardware you need to connect to the operating system that needs a driver. From Windows 7 and up, Microsoft only allows drivers, if the manufacturer asked for certification and the hardware and driver and they work conform Microsofts demands. If the hardware and driver is certified the driver is also on the Microsoft website. Most of the time if you use new hardware the operating system goes to Microsoft to see if there is a correct driver and then installs the driver.
For older hardware, only few manufactures make drivers and ask certification. Most only develop drivers for their new hardware. So for older hardware there are only a few drivers. If Microsoft can't deliver drivers, or the manufacturer from the hardware can't, you are lost. The devices won't work with the new operating system.

If you are using windows XP or older, you should get the drivers from the manufactures that made the hardware.
In your case you should reinstall the driver, when you can get it.

Jul 11, 2014 | Computers & Internet

1 Answer

I need drivers for laptop model w76s


It is not your laptop that needs drivers, it is the hardware you need to connect to the operating system that needs a driver. From Windows 7 and up, Microsoft only allows drivers, if the manufacturer asked for certification. If the hardware and driver is certified it is also on the Microsoft website. Most of the time if you use new hardware the operating system goes to Microsoft to see if there is a correct driver and then installs the driver.
For older hardware, only few manufactures make drivers and ask certification. Most only develop drivers for their new hardware. So for older hardware there are only a few drivers. If Microsoft can't deliver drivers, or the manufacturer from the hardware can't, you are lost. The devices won't work with the new operating system. Nobody told you that before upgrading.

Jul 09, 2014 | Computers & Internet

1 Answer

What's a good place to get cabinet hardware?


I would try Lowe's if you are in the need of cabinet hardware:
http://www.lowes.com/Hardware/Cabinet-Hardware/_/N-1z0zzau/pl
On their site, they even have the hardware divided into categories like materials.

Feb 05, 2014 | Hardware & Accessories

1 Answer

Computor wont recognize dvd player


You might need to have a computer administrator account to perform some tasks.
Most new devices your computer will recognise automatically. When your comp is running, plug in your new dvd player. Does it beep and say 'New Hardware added? If not then use
The Add Hardware Wizard which enables you to add new hardware or troubleshoot any hardware-related problems.
Open the Add Hardware Wizard

  • To open the Add Hardware Wizard, click Start, click Control Panel, and then click Printers and Other Hardware. Under See Also, click Add Hardware.
  • If it can't recognise the player, it gives you the option to select the correct make and model. Is yours on the list? If not, you may need to go to the Microsoft site and update the list of players.
  • Do come back here if you need further help.

Dec 28, 2013 | Televison & Video

Not finding what you are looking for?
Baby Gear Logo

Related Topics:

708 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Gear Experts

Dorel UK
Dorel UK

Level 3 Expert

1629 Answers

Jennifer Rock
Jennifer Rock

Level 2 Expert

135 Answers

yadayada
yadayada

Level 3 Expert

78267 Answers

Are you a Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...