Question about RCA 25404RE3 Corded Phone

Open Question

RCA 25404RE3-A error inhibated

Phone won't do anything but beep, display shows error inhibated, replaced battiers and unpluged from power source and line for 20 minutes, what is error inhibated? can phone be saved?

Posted by on

  • Anonymous May 06, 2009

    Phone line is plugged in -- try to use phone and I get the "Error Inhibated" message - removed batteries and power -- waited -- no improvement.


    What's up with these phones -- it only has a problem on the base unit that has Auto attendant and answering system -- the other phones in this series don't have the problem.

×

1 Suggested Answer

  • 1 Answer

SOURCE: Have an RCA executive series. the light for the

I have an RCA Executive Line 4-line phone. I was away for a week, and came back to find the speakerphone when I dial out is significantly muffled on some of the lines (people that I am calling complain of noise on the line). If I take it off speaker, the quality on the handpiece is normal. First, I thought it was the batteries, so I replaced them. Didn't change. Is there a reset? Is the phone (base) after less than 1 year defective?

Posted on Mar 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a Cordless Uniden Dect 6.0 and also another one that sitts on a bitter base. My problem is this: the cordless with the smaller base shows the message 'Searching' and wont do anything,...


Welcome to FixYa.

Reset the units/set up by doing the following:
  • Turn OFF all the HANDSETS.
  • Remove the batteries of the HANDSETS.
  • Unplug the power source of the BASE.
  • Unplug the phone line of the BASE.
  • Let it stay that way for 30 mins.
  • Insert the battery again of the HANDSETS, make sure it is charged properly.
  • Plug back the power source of the BASE.
  • Plug back the phone line to the BASE.
  • Register any handset that is unregistered (refer to manual).


Keep me posted.

Jas247

Sep 11, 2011 | Uniden D1680 Cordless Phone

1 Answer

I need a new power cord for this phone! Where can I find one?


https://www.superclearance.com/shop/.../product.php?..

.www.phonesdirect.ca/~phonesdi/index.php?main...id. ............ try it

$14.99 this price

Jul 14, 2009 | RCA 25404RE3 Corded Phone

1 Answer

Motorola c51


Hello mdellarusso. Disconnect the power to your phonebase. Remove the battiers from the portables. If the battiers are over 2years old replace them. Wait for 10minutes. Reconnect the base AC power, reinsert battiers and place on their chargers. Perform an operational test. If test fails I suggest a replacement system. Good Luck.

Oct 06, 2008 | Motorola Mobility C51 SD7581 Phone

1 Answer

Can't make calls with the handset, is in speaker all the time


Remove batteries and unplug power source.  Wait a few second before replacing batteries and power source.  This forces the phone to "forget" why it froze, but retains your programmed numbers.

Sep 04, 2008 | RCA 25202RE3 Corded Phone

1 Answer

RCA 25202RE3-B


I need a power cord for the RCA Executive series 4-line Model #25413 Re 3-A 6 volt AC ??

Jul 15, 2008 | RCA 25404RE3 Corded Phone

2 Answers

Visys time/date display settings will not stay correct - help please!


I have the same problem. I cannot believe I wasted $70 this stupid phone. No more RCA ever.

Jul 07, 2008 | RCA 25404RE3 Corded Phone

1 Answer

BIS 34-D phone - Display window blinks date time beeps multiple times/day


The display will blink if power is cut either by unplugging or if the control system is power-cycled. The cause of the power glitches needs to be located & corrected. Changing the ring tone/cadence depends on which control unit is being used.

May 27, 2008 | AT&T Merlin BIS 10 Phone

1 Answer

No Display Information


The AC Power Adapter was not fully connected.

Apr 07, 2008 | RCA 25202RE3 Corded Phone

1 Answer

RCA 25404Re3 Speaker Phone


I had the same problem w/non-responsive buttons. I called Thompson and they suggested a hard reset and said the phone must be re-programmed.

Try the following:
1 - d/c the power
2 - d/c the jack
3 - remove the batteries
4 - wait 15 minutes (this is very important)
5 - replace the batteries
6 - reconnect the line cord
7 - reconnect the power cord

It is very important that this be done in the exact order mentioned.

Good luck and hope this works for you!
Tessa

Feb 28, 2008 | RCA 25404RE3 Corded Phone

Not finding what you are looking for?
RCA 25404RE3 Corded Phone Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Phones Experts

kakima

Level 3 Expert

96372 Answers

yadayada
yadayada

Level 3 Expert

60683 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Are you a RCA Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...