Question about Watches

2 Answers

Aquatech watch Pushing the mode button does not set the time on my watch, it sets the alarm. My watch has 4 buttons and I cannot remember how to set the time. Any suggestions?

Posted by on

  • Anonymous Mar 31, 2014

    I don't remember how to set the watch

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Press mode button 3 times untill you get into the time set mode - press lap/reset twice until the hours start to blink.

press start/stop and cycle thru all the modes depending what time you want to set - it will go thru 1, 2, 3, etc thru 24 H then 1, 2, 3, etc thru 12 A then 1, 2, 3, etc thru 12 P - depending on thte time you want to set the A is for AM and the P is for PM

hope this helps

jeff

Posted on Oct 14, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Press mode 3 times.

to set minutes press lap/reset and adjust minutes by pressing start/stop.

press lap/rest again for setting your hours then adjust your hours by pressing start/stop.

press mode to complete.
_________________________

I have a problem with my aquatech watch too. Please help me if you can.

there are 3 types of hour settings: 12-hr AM ("A"), 12-hr PM ("P"), or 24-hr ("H")

my watch has 24 hours (H) and i dont like this because it gets annoying. Its also difficult to read the time with 24 hours instead of 12. Please give me step by step instructions to fix this...if you can. How do i get my watch to have 12 hours??

Posted on Aug 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I use the buttons in this QHY watch?


Hopefully, this will help...

Lego Watches Manual Instruction:
There are 4 buttons on this lego watch case, Light button, Mode button, Stop button and Reset button, now I will show how to set the time easily!
1, Light Button: Press this button, the watch LCD light will display for 3-5 seconds;
2, How to use the stopwatches chronograph function?
Answer: When the lego watches in normal working condition, Press "Stop button" for 1 time, then the watch goes into the chronograph mode, then you can use "Stop button" and "Reset button" to operate this function.
3, How to set the alarm time?
Answer: When the lego watches in normal working condition, Press "Stop button" for 2 times, then the watch goes into the alarm mode, then you can use "Stop button" and "Reset button" to set the alarm time, also you can turn off or turn on the alarm function and chime on every hour function by the same operate.
4, How to set the right watch time, hour, minute, second, week, date, month, year?
Answer: When the lego watches in normal working condition, Press "Stop button" for 3 times, then the watch goes into the time setting mode, then you can use "Stop button" and "Reset button" to set the second, minute, hour, week, date, month and year.

This is all. So now please have a try to set your lego watches time!

Dec 06, 2014 | Watches

2 Answers

Aspen watch


this should work with your aspen watch let me know if it doesn't

http://dive.scubadiving.com/members/gearreviews.php?s=593

Quote

For the alarm: If you want to use it (I think both it and the light use battery faster than when not used), you set it by pushing mode button twice, as indicated above, then go to hour or minute setting by pushing the lap/reset button, and advance to the time you want by pressing the start/stop button. Pushing mode will take you back to normal time again.

To turn alarm on or off, hold lap/reset button in and at the same time push the start/stop button. Alarm icon will show on or off. When you release the lap/reset button, it will revert to normal time.

If the alarm is on, at the designated time it will start beeping for awhile or until the lap/reset button is pushed (off) or start/stop button (snooze).

Aug 08, 2008 | JCPenney Armitron Sport Link Bracelet...

1 Answer

How do you set a timex ironman wathc and how do you use the stop watch and alarms


Hi hdirkse,

To set the digital time and date on your Timex Ironman, please follow the steps below.

1. press and hold the "set" button for two seconds.

2. Use the "advance" button to reach the correct hour.

3. Press the "mode" button, followed by the "advance" button to set the minutes on your Timex Ironman.

4. Repeat the procedure of pressing the "mode" and "advance" buttons to set the month, date, year and day of week.

5. When you are finished setting the time and date, press the "set" button to save.

Setting an Alarm

1. Begin by pressing the "mode" button until the alarm screen appears.

2. Press the "set" button and use the "advance" button to set the hour for your alarm.

3. Repeat the same procedure to set minutes and seconds for your alarm.

4. When you have finished setting the alarm, press the "set" button, followed by "advance" save and activate your alarm.

5. When you alarm sounds, you can deactivate it by pressing any button on the watch.

Hope it helps.

Thank you for using FixYa.

Sep 25, 2010 | Timex Ironman 53151 Wrist Watch

1 Answer

I have an aquatech watch and don't know how to set it.


Thank you for contactng FixYa.
Setting the Time and Date
  • To set the time and date on your Aquatech watch, begin by pressing the "Mode" button three times to access the time setting screen. Use the "Lap/Reset" button to set the hour on your watch. Use the "Start/Stop" button to advance the numbers to reach the correct hour. When you've set the hour, use the "Lap/Reset" button to set the minutes, using the "Start/Stop" button to advance to the correct minute. Repeat the procedure to set the seconds, month, date and day of the week on your Aquatech watch.
  • Setting an Alarm
  • To set an alarm on your Aquatech watch, begin by pressing the "Mode" button two times to access the alarm setting screen. Use the "Lap/Reset" button to set the hours place, using the "Start/Stop" button to reach the correct hour. Repeat the same procedure to set the minutes for your alarm. When you have finished setting the alarm, activate it by simultaneously holding the "Lap/Reset" and "Start/Stop" buttons until the alarm icon appears. When the alarm sounds, silence it by pressing the "Lap/Reset" button.
  • Deactivating the Hourly Chime
  • Many Aquatech watch models feature an automatic hourly chime. This can be inappropriate and inconvenient in many situations. To deactivate the hourly chime on an Aquatech watch, simply press and hold the "Lap/Reset" and "Mode" buttons simultaneously. After you have correctly deactivated the hourly chime, the hourly chime indicator icon will disappear from the watch's main screen.

  • Best regards. Jewel

    Sep 18, 2010 | Watches

    1 Answer

    NEED AQUALITE MANUAL - CAN'T SET TIME


    To set time:

    1) Press "Mode" button until Time is displayed.
    2) Press and hold "Lap/RST" button until seconds display starts flashing.
    3) Press "ST./STOP" button to change selected entry.
    4) Press "Mode" button to change from seconds>minutes>hours>date>month>day of the week>time format>date format
    5) Press "Lap/RST" once you are done to set the time.

    To set Alarm time:

    1) Press "Mode" button until ALM is displayed.
    2) Press and hold "Lap/RST" button until minutes display starts flashing.
    3) Press "ST./STOP" button to change selected entry.
    4) Press "Mode" button to change from minutes>hours (remember to cycle through for AM or PM
    5) Press "Lap/RST" once you are done to set the alarm.

    To toggle alarm sounds on and off:

    1) Press "Mode" button until ALM is displayed
    2) Press "ST./STOP" button to toggle alarm sounds on or off (shown on display)
    3) If alarm sound is shown on display, alarm will go off every day at the selected time. To turn off alarm once the alarm sounds, simply press any button on the watch.

    Apr 09, 2010 | Watches

    2 Answers

    NEED THE INSTRUCTIONS FOR AN AQUALITE 100 jstreiter@comcast.net


    To set time:

    1) Press "Mode" button until Time is displayed.
    2) Press and hold "Lap/RST" button until seconds display starts flashing.
    3) Press "ST./STOP" button to change selected entry.
    4) Press "Mode" button to change from seconds>minutes>hours>date>month>day of the week>time format>date format
    5) Press "Lap/RST" once you are done to set the time.

    To set Alarm time:

    1) Press "Mode" button until ALM is displayed.
    2) Press and hold "Lap/RST" button until minutes display starts flashing.
    3) Press "ST./STOP" button to change selected entry.
    4) Press "Mode" button to change from minutes>hours (remember to cycle through for AM or PM
    5) Press "Lap/RST" once you are done to set the alarm.

    To toggle alarm sounds on and off:

    1) Press "Mode" button until ALM is displayed
    2) Press "ST./STOP" button to toggle alarm sounds on or off (shown on display)
    3) If alarm sound is shown on display, alarm will go off every day at the selected time. To turn off alarm once the alarm sounds, simply press "ST./STOP" button on the watch.

    Mar 26, 2010 | Bulova Watch

    1 Answer

    How do you set the time?


    To set time:

    1) Press "Mode" button until Time is displayed.
    2) Press and hold "Lap/RST" button until seconds display starts flashing.
    3) Press "ST./STOP" button to change selected entry.
    4) Press "Mode" button to change from seconds>minutes>hours>date>month>day of the week>time format>date format
    5) Press "Lap/RST" once you are done to set the time.

    To set Alarm time:

    1) Press "Mode" button until ALM is displayed.
    2) Press and hold "Lap/RST" button until minutes display starts flashing.
    3) Press "ST./STOP" button to change selected entry.
    4) Press "Mode" button to change from minutes>hours (remember to cycle through for AM or PM
    5) Press "Lap/RST" once you are done to set the alarm.

    To toggle alarm sounds on and off:

    1) Press "Mode" button until ALM is displayed
    2) Press "ST./STOP" button to toggle alarm sounds on or off (shown on display)
    3) If alarm sound is shown on display, alarm will go off every day at the selected time. To turn off alarm once the alarm sounds, simply press "ST./STOP" button on the watch.

    Jan 13, 2010 | Watches

    10 Answers

    Acqua Indiglo Digital Watch


    My watch has 4 buttons (2 on the left, 2 on the right) plus the "Indiglo" button. Use the "Mode" button (lower left) to move between the time and the stopwatch. When seeing the stopwatch, hold the "Mode" button. This will get you to the alarm setting mode. Press the "Mode" button again to switch to the time setting mode. Use the "Start/Stop" button (upper right) to move from seconds > minutes > hour > date > day of week. Use the "Spl/Reset" button (lower right) to change the numbers.

    -AP

    Dec 04, 2007 | Watches

    2 Answers

    Aquatech


    Press the "mode" button in and hold it for a few seconds, when the display flashes use the "start/stop" button to advance and "lap/reset" to select the section you want to change. When finished just press "mode" again.

    Oct 25, 2007 | Watches

    5 Answers

    How to set watch


    I just set the time on mine with these instructions 1) With the watch in the regular time display mode (doesn't matter if 12 hour or military time), depress and hold the lower left hand button (mode button). After a few seconds the watch appears to shift to alarm mode and it is blinking. This puts you into the mode for adjusting the alarm.

    2) If you want to adjust time, date, etc rather than alarm time, after you have done step one, simply press that same lower left button again, and then it will put you into the time mode, but this time the time mode is blinking and you can adjust the various components (seconds, minutes, hours) then you can use the upper right hand button to navigate thru seconds, minutes and hours. Then you can change the time with the lower right hand button you can only change the time forward. I hope this helps !!!

    Apr 02, 2007 | Kenneth Cole RK5034 REACTION

    Not finding what you are looking for?
    Watches Logo

    Related Topics:

    945 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Watches Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18298 Answers

    Jimmy Accardi

    Level 2 Expert

    97 Answers

    yadayada
    yadayada

    Level 3 Expert

    60960 Answers

    Are you a Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...