- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have a good day! any question ,contact me,Please
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry Lampdeng Limited
Wechat ID: 008613178867858
Whatapp ID: 008613178867858
It's likely the lamp ballast has failed. The ballast powers on the lamp. You can also reseat the lamp & make sure the lamp cover is replaced evenly or the safety shutoff switch under the lamp door may not be depressing which will cause a no start.
Go to ebay.com This projector is in good physical condition and powers on, but it only white. Lamp/bulb is NOT included. Manufacturer: Dell Model: 3200MP, 7W625 Cosmetics: Good Test Results: Tested to power on only. Sold AS-IS, with NO warranty. Accessories: Power Cable, Carrying Case
The clicking noise is the protection switch that keep shutting down the unit. This happens when an internal fault had been detected.
Do the following:
Unplug the unit from power for some time. Remove the bulp and refit it in place. Restart the unit.
If still in protect mode (clicking , lamp light and no start), then there is a fault. When the problem is the lamp, the lamp light will come on, but usually protection does not click. Before buying a new lamp that is expensive, have the projector checked, testing with particular attention the high voltage board that will supply power to the lamp. That may be the fault. If you have a replacement lamp in storage replace the lamp first.