Question about Philips 42PFP5332D 42 in. Plasma Television

2 Answers

Philips Problem Hey, Saw your post on here that you worked for philips at one point. Im having problems with a Philips 42PFP5332D/37 May 2007 Serial ending in 1033.. Here is the problem, the set worked and then one day wouldnt display any video, but the sound works. I dont get a PS error fault with the relays and all voltages on the PS are holding at the correct levels. There really isnt a sound from the PS until I hit the menu button, then I start to here the Zsus and XY's buzzing a little bit. I replaced all caps on the hot side of the PS and checked for shorts in the diodes, fets and caps on the driver boards and PS and found nothing. The last thing that I tried was a update of the FW via usb and as far as I can tell, it took, but no way of knowing since I cant get anything on the display.. The display itself when powered on dosent even glow, so I dont know if the logic boards control the startup of the side boards or what, but if you have any advice for me that would be great. Im pretty good about finding these things, but this one has me stumped. Ready to tap in to the buss line and see whats going on. Oh, and how do you uses the alarm board. Thanks, Greg

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 52 Answers

If your missing picture but have audio and is not shutting down one thing you would want to isolate is ssb by removing ssb and placing in unit in white screen mode by jumping connectors on logic board. usually pins 3 and 4 of cn2007. if you get white rastor you'll know panel is ok and ssb is where issue is. micro is on that board. that being said you referenced buzzing coming from x and y sustain. verify after warm up that heat syncs are getting warm verifying boards are operating correctly. normal operation also for logic board is one solid and one blinking led. the blinking led is data flow led and if not blinking is most likely a sign that failure is with logic board

Posted on Aug 17, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Philips 42PFP5332D/37 power problem.
The set blue light comes on, then then standby light comes on and flashes. no picture, no sound and no help from philips. Anyone knows the cause and possible solution? Help

Posted on Aug 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Philips model: 42PFP5332D/37 The other day it clicked and the picture went out. The blue light comes on and it stays blue with no picture or sound


Your set need a thorough check-up. Contact the authorized service centre or an experienced service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Oct 14, 2015 | Philips 42PFP5332D 42 in. Plasma...

1 Answer

Tv will not turn on. Makes on going clicking sound only.


http://www.shopjimmy.com/philips-996500042146-power-supply-unit.htm That is the most likely cause of your problem.

Aug 25, 2015 | Philips 42PFL5332D 42 in. LCD Television

1 Answer

I have had my TV-- a 42" Philips plasma-- for


it can be a poor contact or puffed capacitor in the power supply board

Dec 06, 2010 | Philips 42PFP5332D 42 in. Plasma...

1 Answer

Quietly watching tv, then a pop, a buzz and a crack on the screen


Yes,if the screen cracked from the inside of the panel and not the outside,you are entitled to either a replacement or warrantied repair. That was caused by heat and we have serviced heat related manufacturer design flaws. Unfortunatly,it is out of warranty,but if it was caused through normal use and not user error,a technician will have to confirm it was internal cracks. MAKE SURE you call philips for an authorized servicer and have the reference number on hand,model number,and serial number.

Jul 02, 2009 | Philips 42PFP5332D 42 in. Plasma...

2 Answers

Firmware update


This TV has the ability to upgrade firmware from any standard USB thumb-drive. Here is a link to the Philp's site that has the instructions as well as the link to download the newest firmware:

http://www.usasupport.philips.com/consumer/productDocuments.html?ProductCode=42PFP5332D/37&subCat=PLASMA_LARGE_32_42_SU_US_CONSUMER

Jan 20, 2008 | Philips 42PFP5332D 42 in. Plasma...

Not finding what you are looking for?
Philips 42PFP5332D 42 in. Plasma Television Logo

579 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68368 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4593 Answers

Are you a Philips Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...