Question about Panasonic KX-T7730 Corded Phone

1 Answer

Con I am adding a radio to my kxta308 system and for a hand-set i am using a kxt7730. Once i plug it all together, i am still hearing the standard hold music. Is there something i have to turn on via the hand-set?

Posted by on

  • sumoto Jul 24, 2008

    Yes thank you, but how do i do that exactly as i have no manuel.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

Hi sumoto,

to activate your radio, you have to go through system programming
and activate the external music feature....

Posted on Jul 24, 2008

  • jon_than21
    jon_than21 Jul 25, 2008

    open the system programming(its the phone connected to jack 01) press program button and enter * and # followed by the password(1234), then enter 104, press auto/ans button to select, select external music, press store button.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CO problems


Check your Phone if connected to Jack 01 to do programming below:

on KX-T7730 phone Press Program *# (enter Password) default is 1234
Press 400 SP-Phone(CO NO.? will be displayed) Press *(Mixed or Connect will be displayed), Press AUTO ANS/MUTE untill (NOT Connect will be displayed) Press AUTO/STORE. Press HOLD(SYS PGM will be displayed) Press 400 (CO Connection will be displayed) Press SP- Phone(CO NO.?) Press SP-Phone (Not Connect will be displayed) Press AUTO ANS/Mute until (Connect will be displayed)Press AUTO/STORE PRESS PROGRAM to return to NORMAL Display.

For the incoming Calls PRESS Program *#1234 (ENter Sys PGM will be displayed) PRESS 408(Day IN CO will be displayed) Press SP Phone (CO No? will be displayed) Press SP Phone (CO1:#01:DISABLED if this is displayed PRESS AUTO ANS/MUte the Enabled will be displayed) Press AUTO/STORE. Press Program to return to normal display. In this Manner All Calls will ring to extension which is connected to Jack 01. you dont need to press the button anytime there is an incoming call.

Dec 04, 2013 | Panasonic KX-T7730 Corded Phone

1 Answer

I want to lock the epabx system given to my employees. i have panasonic kxt7730 system. please suggest.


Lock? As in restrict dialing? It's done through system programming in the specific cabinet. In a TA series, it requires a bit of studying and reading to understand TRS and COS setup. There's also a dialing restriction option that can be used as a 4-digit security code before you can dial out on a line, but once that code is broken, you can compromise the system.

Carl

Jun 20, 2011 | Panasonic KX-T7730 Corded Phone

1 Answer

Hello, please i want to know how to set up speed dial on the KXT7730 that is not the main line ie not on 0, or 101 on the switch board


Guessing that you already know about SYSTEM speed dials, then the 12 buttons on the right side of your phone are the PERSONAL speed dials. When you get dial tone on the intercom, you can dial "9" and the system will either give you a dial tone, or the highest line in the system. If that is not a working line, you need to fix that first (system program 400 assigns lines in service).

Once you have that, a PF button is programmed by pressing PROGRAM, the button, and dial 9 + your number dialed the same way as if you had pressed a CO button then STORE. You can keep pressing PF buttons and programming numbers. Then press PROGRAM or pick up the handset and drop it back down to end programming.

Carl

Apr 21, 2011 | Panasonic KX-T7730 Corded Phone

1 Answer

We have a new KXTES824 which we are setting up here with a mix of KXT7730 and SLT phones. We've done this before without incident but have an odd problem. We have a single phone connected (PT) and...


One of the ports is shorted or you have the DISA turned on. Start by dialing each extension 101-1xx on the 824 and make sure that none of them are tripping the ring. You'll probably find that one of the ports is bad, the wiring is bad, or there is a programming issue. IIRC the U.K. system is not delivered with DISA, but you may have installed or turned on that feature.

Carl

Feb 03, 2011 | Panasonic Lands Phones

1 Answer

My panasonic kxt7730 has three internal phones connected to it AND currently all internal lines are not working AND also I cannot dial internally through the main phone set itself. On the other hand i...


Some Panasonic cordless phones come with up to five handsets each will need to be properly adjusted. You may need to set the main handset to synchronize with the base unit plugged into the telephone wall jack and assign special configuration numbers to the other handsets in order to properly identify each one within a specified location. One handset left in the turned on mode may make it impossible to place calls with the any of the other handsets. This will continue until either the battery dies or fails on the handset or the phone is switched off and replaced in its charger for charging again. Synchronize the main handset by pressing the MENU button on the handset, then pressing the down button IN order to select the number you wish to assign to that handset. Repeating this process if you have already done so will greatly decrease the level of errors experienced with panasonic phones MORE USEFUL INFORMATION FOR ALL YOUR ELECTRONICS When troubleshooting these units, there are always several variables to consider. First check to see what last occurred with the unit such as did the children play video games, did the electricity go out due to bad weather. You may see that there are many possibilities but let's focus on what occurred last to the unit. Once we determine what happened last, we may isolate the actual cause of the problem. The actual cause may be associated with projection issues, older versions (Picture tube), interference from devices located nearby, and even a radio turned on and located really close to your unit. This is normally known as electromagnetic interference to electronics and is very common with the error you have provided today. Please continue to look for anything EXTERNAL to the unit before looking at the internal components. I have been working on these a long time so feel free to follow up with me.

Jan 17, 2011 | Panasonic KX-T7730 Corded Phone

2 Answers

How can i active or desactive the FWD/DND in the model. KXT7730?


it really depends on your phone system

but the possibilities are:

1) "INTERCOM"
2) *710
3a) 0 to deavtivate
3b) 5 to set to busy/no answer
4) put the number you want to fwd to then "#" *confirmation tone*

or

1) "INTERCOM"
2) 710
3a) 0 to deavtivate
3b) 5 to set to busy/no answer
4) put the extension number you want to fwd to *confirmation tone* (extension number only)

Jan 03, 2011 | Panasonic KX-T7730 Corded Phone

1 Answer

I have an 824 and i am using the kxt7730. when I answer a call, the caller doesnt hear me for the first 2 seconds then i have to repeat my self. we dont have a DISA or Voice mail or Auto Attendant. i have...


Dialing 790 on the intercom resets the extension. If you move your phone to another port on the system does it work? If it does, do that and swap directory numbers in programming.

Jun 26, 2009 | Panasonic KX-T7730 Corded Phone

1 Answer

Lost password kxt7730


Hi i am trying to change the name of a extension in my kxt7730 but it asking me the code i already use *#1234 and **1234 but it didnt work, i will like to know if its a way to reset it thank you

Dec 10, 2008 | Panasonic KX-T7730 Corded Phone

5 Answers

Panasonic kxt7730


Here is a link for the 7730 manual.


http://www.walterbridge.com/manuales/KXT7720-User-Guide.pdf

Aug 30, 2007 | Panasonic KX-T7730 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7730 Corded Phone Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

kakima

Level 3 Expert

98921 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...