Question about Hamilton Beach 67800 HealthSmart Juice Extractor 350 Watts

3 Answers

I have problem with Hamiton Juice extractor Model 395 W

I cannot dissemble it no more after using it, the cutter/strainer seems to be is actually the first time I use I doing something wrong?

Posted by on

  • Anonymous Apr 04, 2009

    I disassembled it once but I can't do it again. The strainer seems to be stuck.



3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

This model has a recall on the extractor you might contact them for a new one.

Posted on Sep 27, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Cant get the basket out after using it
395W Juice extractor

Posted on Mar 29, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I posted the following for another model, but it may apply...but then..maybe not.

The solution i have found is relatively simple, but going to take a bit of handy work.
first, it would greatly help to remove the bottom from the unit. You will need to remove the 4 rubber pads, and then the 4 screws. 2 of the screws are way up there and need a thin philips.
Regardless if you removed the bottom, you will need to drill a hole right in the center of that circular grill on the bottom piece.
If you did NOT remove the bottom piece, I would take a nail, clamp it with vice grips, get it red red hot off the burner, and burn away that center plaster to create a hole. So whether you drilled the hole (with the bottom removed) or burned the hole (with the bottom intact), you will see the bottom of the motor has a slot head.
Now, all you need to do is take a thin blade screwdriver, or thin butter knife into that slot, holds the motor, then twist the blade right off...or on...whichever the case may be.
Hope this helps...sure helped me!

Posted on Jul 30, 2012

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need to remove the parts for washing How I do this?

Things You'll Need:
  • Soft-bristled brush
  • Stiff-bristled brush
  • Dishwasher (optional)
  • Mild detergent
  • Lint-free microfiber cloths
  1. Unplug your Acme 6001 Juicer. Carry it to a countertop near your kitchen sink.

  2. Remove the pusher and cover, and set the pieces in a sink. Unscrew the clutch, remove it and set it in the sink. Remove the cutter blade, strainer basket and juice bowl, and place the pieces in the sink.
  3. Discard or remove and store any pulp that you find in the strainer basket. When you're finished, rinse the remaining fruit and vegetable pulp and juice from the pieces under cool, running water. Dislodge hard-to-remove pulp from the cutter blade and strainer basket with a soft-bristled brush or with a stiff-bristled brush if necessary.
  4. Wash the pieces in a dishwasher or by hand. To wash in a dishwasher, place the stainless steel pieces in the lower rack and the plastic in the top rack and wash on a normal cycle with other kitchenware. To wash by hand, fill the sink with warm water and a few drops of mild detergent and wash with a lint-free microfiber cloth.
  5. Run the pieces through the rinse cycle in your dishwasher or rinse under running tap water by hand. Air or wipe dry the pieces.

  6. Wipe the base with a slightly soapy cloth. Rinse with a damp cloth and wipe dry. Reassemble your juicer by returning the pieces to the base in reverse order.

     for a visual:

Jan 28, 2011 | Acme 6001 Juice Extractor

1 Answer

The cutter is stuck how can I get the cutter off of the champion juicer?

I have had this happen in the past...couple things you might try.... put it outside or in the freezer to cool it down. next i have dumped olive oil 'around' the end of it that is butted against the unit- some should seeps down and then i used a dull butter knife or steak knife to wedge in there to pry it off.(genlty) in different positions. If it is rusted on, well that's another matter entirely. But if it's just stuck, could be that you haven't oiled it each time? or my other guess is they aren't making the cutters like they did 25 years ago as i have had 3 champtions and more problems with the new ones and cutters jamming (i put a coule drops of olive oil into the hole in the cutter each time). and as a last resort a big burly man with gloves and feet to hang on to it and jimmy it off LOL good luck ;-)

Jan 08, 2011 | Champion G5NG853S Household Juice...

1 Answer

How do I take apart the strainer section?

Everything should just lift up and off. May be
juice stuck together. Try a little tap to the whole

Mar 04, 2010 | Acme 6001 Juice Extractor

1 Answer

Acme juicer vibrating so much.

I've had one for 21 years and when I replaced the blade the same thing happened.
The blade is not supposed to be held firmly in place so it can slip intentionally to
minimize vibration. If you bought the juicer new, think back, and I believe you will
remember the vibration problem. I seems with a worn blade they vibrate less. The
motor is very durable and uses roller bearings like on a skate board. I went back
to the old blade, which I sharpen with a drill using a small bit.

Jan 11, 2010 | Acme 6001 Juice Extractor

1 Answer

Juice extractor 67800 350 Watts, The problem is the cutter strainer gets stuck and I can only get it off after much effort and struggle, is there a simpler way ,Margaret

As soon as I had described the problem I found the solution. A smear of olive oil around the inside of the base of the cutter, and around the seating of it, on the unit. And it worked. No problem.

Nov 04, 2009 | Hamilton Beach 67800 HealthSmart Juice...

1 Answer

Strainer for Juicer 7001

PLUS JUICERS AT 800 578 5939.

Mar 31, 2009 | Acme 6001 Juice Extractor

6 Answers

Rival juice extractor model 965


Jul 15, 2008 | Juicers

5 Answers

OPENING the JC-250 Juice Extractor

Hey, you probably have figured it out! I just got a juicer without a manual and couldn't find a way to dismantle for cleaning but I got it!!!!!!!!! Just put it upside down and twist and turn. Everything will fall off ( cutter and container). I'm so happy to help!!

Jan 22, 2007 | Brentwood JC-250 Juice Extractor 350 Watts

Not finding what you are looking for?
Hamilton Beach 67800 HealthSmart Juice Extractor 350 Watts Logo

1,087 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hamilton Beach Juicers Experts

David Payne
David Payne

Level 3 Expert

14161 Answers


Level 2 Expert

94 Answers

 Russ Hill
Russ Hill

Level 3 Expert

3261 Answers

Are you a Hamilton Beach Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides