Need pass key number to connect to my PS3 - Motorola Mobility H700 Wireless Headset

Hi Richard

Try putting in 0000 this is normally a default pass code for most Bluetooth items hope this helps

go into the ps3 and see if the device is visable, if it is set accordingly

If your PS3 is asking for a pass key, simply enter four zeros (0) into the pass key field. (0000) may show up as (****)

The pass key for the Bluetooth headset is 0000 (four zeros).

If you need further assistance please do not hesitate to get back to me.

Hope it helps.

When you purchased the router, you should have run the "Wireless Networking Setup Wizard" to configure the router, to set an SSID, to set an encryption-level (use 'WPA' not 'WEP'), and to set a password (WPA-key or WEP-key or pass-phrase).

Use those values that you used when you configured your router to configure your PS3.

From the manufacturer's site at http://www.madcatz.com/faq/default.asp?Action=Q&ID=146

8. Locate “8860” from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: “Register completed”

Just went through the exact conversation with my Verizon people. The pass key number is 0000. It worked:-)

the pass key to connect WEP 200 is 0000 and it will get connected

pass keys 4 headsets are normally 0000 or 1234 unless you've manually changed it. If so then you will have to go thru each number cycle from 0000, 0001, 0002, up to 9999. (",)

the default passcode is 0000. I hope that helps.