Question about Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Canon ip 3000 saying printer not responding

Hi my printer was working fine but know it is saying printer not responding every time i try to print something i have replaced the usb cord but still nothing can somebody help please thanks janet

Posted by on

  • janet1972 Jul 23, 2008

    hi thanks i installed the driver and it worked yay thanks janet

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Canon Master
  • 1,352 Answers

When you disconnect the printer from your pc does it make a sound? also check File - Print - ( is the printer you are using highlighted? If no, right click and set as default. If yes, right click and see if it says "ready" when disconnected it should say "offline"
Which means the USB and the connection is OK
Look at the bottom right ot the screen is there a printer Icon there? if yes right click and see if there are any jobs pending, delete all jobs.
Otherwise it may be the driver which you may have to re-install.

Posted on Jul 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I get a message saying that the waste ink absorber is almost full- press the resume button to resume printing. Ip 3000 serial number: FCBW27942 Purchase date: 8/20/04


1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Dec 30, 2010 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Canon pixma ip 3000 error message printer is offline


If the orange lamp blinking only it's the print head is not installed, or it is not properly installed.Open the cover remove the print cartridges then remove the print head and put back it on.If not help the print head is defective and need replace.
If the orange lamp blinking with green alternately it's ASF (cam) sensor error.The problem is in sheet feed unit.

Oct 15, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Green and orange lights flashing, saying service error 6000


read all first!
you didn't say how many blinking
and in what order so ...
First thing you need to do is print an EEPROM information page, step number 2 below.
Once you have an EEPROM print you can reset the waste ink counter, if needed, which is step number 4 below.
Service Mode: This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
Service Mode Operations
With the printer powered off, hold down the "Resume Button" and press the "Power Button".

While holding down the "Power Button", release the Resume Button" and press the "Resume Button" twice in succession. Now release the "Power Button".

The indicator will blink in green and remain lit in green.

Select one of the following service mode functions by pressing the “Resume Button” the specified number of times.

1 time = Service test print.
2 times = EEPROM information print.
3 times = EEPROM initialization
4 times = Waste ink counter resetting
5 times = Destination settings
6 times = Print head deep cleaning

Then press the “Power Button” one time to perform selected function.

If you press the "Power Button" two times it will take you out of service mode.

This information is listed above in this thread and many times in other Canon threads in this forum. I simplified Canons wording so I could remember the service mode functions easier.



PIXMA IP 3000 service error 5100

I got service error 5100 after a paper jam sometimes 5 times blinking orange. in my PIXMA IP 3000

to fix it
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

or: and Also;
Unplug unit, hold power and reset button down then plug it in while still holding both buttons down;
Then to step 3 above.

Feb 19, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

I have a canon pixma ip 3000 and i need to empty inktank can u help


Ther is no ink tank it is a counter pre set by canon who decided you can only print so many pages . it is artificial number.
reset your machine by the following should help
read all first
First thing you need to do is print an EEPROM information page, step number 2 below.
Once you have an EEPROM print you can reset the waste ink counter, if needed, which is step number 4 below.
Service Mode: This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
Service Mode Operations
With the printer powered off, hold down the "Resume Button" and press the "Power Button".

While holding down the "Power Button", release the Resume Button" and press the "Resume Button" twice in succession. Now release the "Power Button".

The indicator will blink in green and remain lit in green.

Select one of the following service mode functions by pressing the “Resume Button” the specified number of times.

1 time = Service test print.
2 times = EEPROM information print.
3 times = EEPROM initialization
4 times = Waste ink counter resetting
5 times = Destination settings
6 times = Print head deep cleaning

Then press the “Power Button” one time to perform selected function.

If you press the "Power Button" two times it will take you out of service mode.

This information is listed above in this thread and many times in other Canon threads in this forum. I simplified Canons wording so I could remember the service mode functions easier.


to fix also :
PIXMA IP 3000 service error 5100

I got service error 5100 after a paper jam sometimes 5 times blinking orange. in my PIXMA IP 3000

to fix it
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

or: and Also;
Unplug unit, hold power and reset button down
THEN plug it in while still holding both buttons down;
Then to step 3 above.

Feb 18, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

No print


Hi there you can try this.

Canon IP 2000 / 3000 INK counter reset
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..


All the best Pineworks

Feb 14, 2009 | Canon PIXMA iP2000 InkJet Printer

2 Answers

Pixma ip 3000


I think that if you use the bottom tray to load the paper, you can use the different sizes of paper to print. Make sure to click the second button inside the lid that shows the direction the paper is fed into the printer. hope this helps!

Jan 15, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Service error 5100



Hello it only a try but could be

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jul 28, 2008 | Canon PIXMA iP3000 InkJet Photo Printer

2 Answers

Printer doesn't respond to computer


there were many instances why the computer says "printer is not responding" either it is not configured correctly. for a start..

try this go to start- printer- right click the desired printer- open up properties- then click print test pages-

if it does print then it should work on all platforms, if it doesnt then you might have installed the wrong drivers.

try this first

Jul 24, 2008 | Canon MP140 PHOTO AIO All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA iP3000 InkJet Photo Printer Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...