Question about Graphics Cards

1 Answer

Installing error code -106

Upon install process it makes it to about 8% then gives the following error code. ComponentMoveData had the following error: media name: data Componet: app-photoshop\web file group: web file: adobeweb.dll error number: -106 (refer to the online help) Then when I click ok it shows this message: An error occurred during the move data process: -106. So when I hit ok it closes it all out. I really need this software loaded and Adobe does not support this version anymore. Any help will be greatly appreciated. Bethn Upon install process it makes it to about 12% then gives the following error code. ComponentMoveData had the following error: media name: data Componet: app-photoshop file group: app file: typelibrary.tlb error number: -106 (refer to the online help) Then when I click ok it shows this message: An error occurred during the move data process: -106. So when I hit ok it closes it all out. Upon install process it makes it to about 13% then gives the following error code. ComponentMoveData had the following error: media name: data Componet: app-photoshop file group: app file: typelibrary.tlb error number: -106 (refer to the online help) Then when I click ok it shows this message: An error occurred during the move data process: -106. So when I hit ok it closes it all out.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 730 Answers

I suggest go to Start/Settings/Control Panel/Add remove programs.
Check and see if the program is in list and remove it. While in control panel go to system/Device Drivers check non have a yellow mark on them if so reinstall drivers or upgrade Reboot and try again.

Posted on Jul 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows 8 graphics card installation problem


Hello,

I think you are installing the wrong one. Try going to the device manager and refresh it to see if the hardware is detected. If yes, then look for a question mark or exclamation point to make sure that the generic driver is not yet installed. if installed then try scanning your computer with RadarSync to make sure that it's up-to-date.

David

Jun 16, 2013 | Nvidia Graphics Cards

1 Answer

Error code 10 showing in xp


When is this showing up? Is it a Wnndows error code or an NComputing error code? Is it happening when installing software, when attempting registration, please give more details.

Jul 24, 2011 | NComputing X300 3 User Expansion Kit...

1 Answer

Had to load window xp on computer than try loading installation driver cd . it came up with error


1) Are you trying to install using Recovery CD and getting that error try installing Xp directly.
2) If you want to install Fresh windows, Boot pc with windows Xp and follow the instructions. And do full format your drive once where you want to install your XP, and continue installation..

Sep 18, 2010 | ATI RADEON 9550 Graphic Card

3 Answers

Need code to install disk


I'd suggest emailing/contacting the Dazzle company directly via phone, email, or what ever contact information they have and tell them your problem. Make sure you have all the information you can find on the product so that when you contact them you are ready to answer their questions. I hope that helps :) Good Luck

Jul 29, 2010 | Pinnacle Dazzle DVD Recorder

1 Answer

VGA problem


plz dont use vista !
use xp for game performance ...ur vga driver may not have the ability to install
so use xp




thank u.....

Aug 06, 2009 | Viper Diamond ATI X1600 PRO AGP 512MB...

1 Answer

Upon installing Dazzle, there was good audio sound but no video.


On the start up of the instant DVD recorder program, you can either use the "let the wizard guide you" or "advance mode"

1. Select source:
you should select the options:

Video standard NTSC (Because this is the default in our region)
Video composite - if you are using RCA (red, yellow and white cables)
S-video - if you are using the cable with several pins in it.

2. Select Burner
You should select the options:
Hard disc folder - if you will be saving the content in your hard drive, the format of this files are DVD such as VOB and IFO etc.
TSST - _ _ _ _ - if you will selecting your DVD drive.

(If you have selected your DVD Burner and you cannot click "next" to proceed to the Third option,
this means that your DVD drive is not able to burn a DVD)

3. Select menus
It must be NO

4. Recording
select total recording time (make sure that Dazzle is selected in the "select source" to set the total recording time, if the Dazzle is not available, try other USB ports or download the drivers in the link below)

Apr 10, 2009 | Pinnacle Dazzle DVD Recorder

1 Answer

Installing a graphics card on micron clientpro


Try removing the drivers for the old video card right before installing the card. Sounds like a driver conflict. The beeps are error codes saying what the problem is. Look up the beep error codes for your motherboard. If the geforce card is not supported by the system requirements this too will cause that problem.

Jul 15, 2008 | Graphics Cards

1 Answer

Sound driver of compaq presario a900


Link
Run
install reboot the run and install this
This will create a swsetup folder in c drive link ("C:swsetupsp34200")


Installing this driver may result in an error. But continue with the
following steps to get the audio driver installed correctly.

1. Click on Start and select Run. Now type devmgmt.msc and press enter.

2. Right click on "Audio device on High Definition Audio Bus" and click
Update driver.

3. Select "Install from a list or specific location"

4. Click Next. Then select "Don't search, I will choose the driver to
install"

5. Click Next and then select "Sound, video and game controller" from the
list.

6. Click Next and then click Have Disk.

7. Click Browse C:swsetupsp34200 folder and select the .inf (wis30b2a)
file and click open and Continue with the onscreen instructions.

Regards
Fixya member abgog

Jun 30, 2008 | Compaq Graphics Cards

2 Answers

Geforce fx5500


From your post, it seems like Windows is booting correctly, but your card isn't correctly displaying the signal once the machine tries to load into your user profile.

Go into Safe Mode and uninstall the drivers for the card. Go back to the beginning of the installation process and follow it step-by-step. If this does not help, try inserting the card first, and then installing the drivers afterwards.

Mar 27, 2008 | Palit Microsystems GeForce FX5500, (256...

1 Answer

Geforce 6800GT conflict with windows xp pro


Have you run a virus or spyware scan of your machine? Is your virus and spyware up to date? While running @ 640x480 does it exibit any other errors? lsass.exe is a system process of the Microsoft Windows security mechanisms. It specifically deals with local security and login policies. This program is important for the stable and secure running of your computer and should not be terminated. Note: lsass.exe is a process which is registered as a trojan. This Trojan allows attackers to access your computer from remote locations, stealing passwords, Internet banking and personal data. This process is a security risk and should be removed from your system. Note: lsass.exe is registered as a downloader. This process usually comes bundled with a virus or spyware and its main role is to do nothing other than download other viruses/spyware to your computer. This process is a security risk and should be removed from your system. DON'T REMOVE THE LSASS.EXE let a virus/ spyware program determine if its good or bad. http://www.filehippo.com you can download virus cleaner (avast is my favorite virus protection) windows defender, spybot S&D, AdAware, HighJack This to clean the machine. Then download and install the latest drivers from here: http://www.nvidia.com/content/drivers/drivers.asp Driver Installation Hints * "Download Accelerator" utilities should be disabled when downloading any drivers. * Do not run virus protection software in the background while installing the drivers. This prevents the driver from configuring itself properly. * Before installing new drivers make sure you uninstall all NVIDIA display drivers from the Windows Control Panel. Browse to the Start Menu > Windows Control Panel > Add/Remove Programs and search for "NVIDIA Windows Display Drivers" or "NVIDIA Display Drivers" and select remove. Get back to me if none of that works. Good Luck, Tim

Mar 15, 2007 | XFX GeForce 6800 GT, (256 MB) Graphic Card

Not finding what you are looking for?
Graphics Cards Logo

Related Topics:

1,016 people viewed this question

Ask a Question

Usually answered in minutes!

Top Graphics Cards Experts

kakima

Level 3 Expert

96372 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

phoenix chi
phoenix chi

Level 2 Expert

389 Answers

Are you a Graphics Card Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...