Question about Lexmark T640 Laser Printer

1 Answer

How do I set the top margin on a Lexmark T640?

When printing statements for my customers, the address is too high on the statement form and doesn't show in the envelope window. I need to move the printing down a little bit but don't know how.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,011 Answers

Sorry for the delay, but I'm new to this site and still trying to figure out how this site works.

OK, are you printing this envelope field from an application such as Word or from an application that sends explicit cursor move commands?

Are you using the correct envelope definition?

Can you do a "Print To File" from the print page menu and then send the failing print job to me so I can look at the file in binary format and see what information is actually being sent to the printer.

My e-mail address is janddgasrepair@verizon.net.

Don

Posted on May 23, 2009

  • Don  Farrell
    Don Farrell May 28, 2009

    Update:



    Still waitig on reply from original poster. Don



×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lexmark T640 print black page


if the printer is kicking out all black pages a couple of things can cause this first open both front doors and remove the toner cartridge. leaving the lower front cover open slowly lower the top cover watch the charge roller as it lowers with the lid make sure it is comming down striaght. if it is replace the high voltage power supply

Nov 20, 2009 | Lexmark T640 Laser Printer

1 Answer

Lexmark X4550 not printing in Vista can't enable bi-directional


"Bi Directional Printing" is a statement of Parallel Port printing. Are you connected from your PC to the Printer via the parallel port?\

Did you disconnect the USB cable form the PC and then delete the current driver prior to installing the Win 7 driver?

Nov 18, 2009 | Lexmark X4550 Multifunction Wireless Color...

1 Answer

I print on labels and the print is too high. How can I lower Print on page?


hold go and return power on the printer until in the screen you see it start to veify ram then release. this will bring the printer up to registration hit select there will be 4 settings showing right left top and bottom. use the select button to move from setting to setting if the print is to high minus from the number showing in the top position make the same number change to the bottom setting untill the print is in the right position. remember or make note of these changes if the print gets further away reverse your changes

Nov 04, 2009 | Lexmark T640 Laser Printer

1 Answer

Lexmark Z2420: How to nudge margins to align a form


Go into your printer software before printing, tell the software what you are printing on letter, 4x6 labels etc.... then print

Jul 08, 2009 | Lexmark Z2420 Printer

2 Answers

Can't figure out how to print on statement sized paper.


After I had been attempting to adjust the paper guides in the feeder tray to accommodate statement-size paper, I finally "discovered" the drop-down door to the manual feed tray.  Duh!  This is a networked printer that I've only ever used for printing letter and legal sized documents until now.

May 28, 2009 | Lexmark T640 Laser Printer

2 Answers

My lexmark e260dn ps3 will not print envelopes correctly


THIS PRINTER CANNOT PRINT ENVLOPES, CHECKS, MONEY-ORDERS OR OTHER CUSTOM SIZES.

I have tried the various drivers, and it just won't print custom size documents, like envelopes, or checks. The From address, typed in the top left corner falls on the top right, the to address typed in the center falls off the page, and so it does not even show up. I just see the word to in the right margin, but the addressee's name and address are missing. I have spent days with tech support and online,without a solution. This printer is a lemon.

Feb 26, 2009 | Lexmark E260dn Laser Printer

1 Answer

Want to print on legal size paper from Tray 1 (top) as default


print menu - config and verify paper is being sensed correctly. If paper size in tray is not set correctly printer will ask where to print from

Feb 12, 2009 | Lexmark T640 Laser Printer

1 Answer

Printing settings


Hi,I have a doubt, whether the perview is good and only the print out is bad or both are bad.
Anyway i am giving solutions for both.
The Statement or Report Looks Fine When Previewed, but Looks Bad When Printed If the appearance of the statement or report when printed differs from its appearance when previewed, this may indicate a problem with the printer driver (such as corruption of the driver files). Make sure you are using the most current version of the correct printer driver for the operating system on your computer. For example, a printer driver for an OkiData MicroLine 390 for Windows 98 may not work well at all when printing from Windows XP.
  1. If you need to check for a different printer driver, begin by checking the installation disk or CD-ROM that was provided with your printer.
  2. If you can't find the driver you need on the installation media provided by your printer's manufacturer, check the CD-ROM from which your operating system was installed (i.e., your Windows CD-ROM).
  3. If you can't find the driver you need on your Windows CD-ROM, or if you need to try an updated version of the driver you are currently using, check your printer manufacturer's Web site.my.okidata.com/pp-ML521.nsf/openingdrivermenu?OpenFrameSet
The Statement or Report Looks Bad Whether Previewed or Printed There are many factors that can contribute to undesirable printed output, such as margins, fonts, and custom paper sizes. Use the following steps to troubleshoot this problem.
  • Try using a different font size. See if there is a separate font size available for the same font family (e.g., 15 cpi vs.10 cpi).
  • Try adjusting the page margins and printer offset adjustments in the Page Setup window.
  • Check the printer driver properties to determine if a custom paper size is specified. If not, you may need to specify one. For example, when printing checks that have only one stub, you may need to set up a custom paper size of 8.5 inches wide by 7 inches tall. Conversely, if a custom paper size is incorrectly selected, printed output of reports and statements may be adversely affected.
  • In the Advanced Printing Features window, select the Optimize for Print to File check box and clear all other options and check boxes.
  • Try temporarily renaming the STI.INI file and restarting the Tabs3 or PracticeMaster program. The STI.INI file holds all of the printer settings. If this helps, you may have to recreate the margins, font selections, and other settings used for printing since that information is stored in the STI.INI file. If this does not help, delete the new STI.INI file and rename the original file back to STI.INI.
  • Is the printer configured to emulate another type of printer? Consult the printer's manual and/or the printer manufacturer's Web site to determine if the printer is able to emulate another type of printer such as an IBM Proprinter. If you have tried all of the internal fonts available in the printer's current configuration, it may be beneficial to configure the printer to emulate a different type of printer and then install the corresponding printer driver. Then you can test each of the internal fonts available in the new driver.
  • Once your printing issue has been resolved, check the printed output to ensure that lines are not wrapping or breaking when they should not. Make sure the margins all appear correct.
  • When you are satisfied that the printed output is completely correct, be sure to look at a preview of the same print job, to ensure that the preview is legible. For some printer drivers and fonts, it may be necessary to make a second installation of the printer that uses TrueType fonts. This second installation would then be selected whenever you need to preview reports or statements, and the original installation would be used for the actual printing.

Hope my info solves your problem,
Thanx for using fixya.

Oct 01, 2008 | OKI MICROLINE 521 Matrix Printer

1 Answer

Right Margin Does Not Print


This one work for me...on top left of the page click on file then click print. A box print with option opens...... click options then select or put a check on left bottom box that says print all linked documents....good luck!

2nd option or
Last option and 100% will print the entire page even allows you to select what you want to print inside the page. Its called webcollect and here is the link.......http://www.web-collect.co.uk/

Mar 21, 2008 | Canon PIXMA MP470 All-in-One Printer

1 Answer

Network connections to Lexmark T640 Laser Printer


Might try going into the printer setup on each computer and set it to print after the current job is finished. Let me know :-)

Sep 14, 2007 | Lexmark T640 Laser Printer

Not finding what you are looking for?
Lexmark T640 Laser Printer Logo

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...