Question about Panasonic CQ-C7103U CD Player

1 Answer

Not turning on

Last night the cd player was working when i turned that off, but today its not turning on. a red light is blinking on the base pannel but the front pannel is not turning on. is that any thing wrong with that and how?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

That Red light is saying that the front panel is not attached. This is the "Security Indicator" and is to warn crooks when you have removed the face plate. If this is on, and the plate is attached, I would remove and replace the front detachable plate once to ensure a good connection. That's a simple thing to try and only requires a quick operation.

Hope that helps. (If not, more info is needed for me to be of any help.)

Posted on Jun 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just installed Dual XDMA6330 has no power no lights no sound


the red wire needs to go to a switced power source. unless both the red and yellow wires are getting power, the deck will not turn on.

Mar 12, 2010 | Dual XD7600 CD Player

1 Answer

Theirs power to the internal eject but not on


tie your ignition wire on your battery it should turn on if it works tie the ignition wire into the fuse pannel 10 amp if you have one

Jan 09, 2010 | Kenwood KDC-3028 CD Player

1 Answer

Face plate wont turn on


On the faceplate back, there should be some metal contacts. Take a white (not pink, red, purple, etc) pencil eraser and clean the contacts on the faceplate back. You can take a little rubbing alcohol and a q-tip to the contacts on the player itself...just use a little bit. Let it dry for about 5 minutes and try again. If it has a reset button, you may try pushing it, however that will most likely reset the clock, radio stations, and any eq settings.

May 30, 2009 | Kenwood KDC-MP628 CD Player

1 Answer

Kenwood kdc-mp232 not turning on


check your connections. i believe only the standby wire is connected.. or the built in amplifier detects a short on the speaker wires.

Jul 18, 2008 | Kenwood KDC-MP232 CD Player

2 Answers

Kenwood KDC-MP202 sound turns off when headlights are turned on


just solved a similar problem on my car i bought a Cd/dvd player for my 2000 concord lxi i hooked it up and hooked a rear-view camera and it worked perfect but wen i turned the headlights on the cd player shuts of so i disconnected the orenge wire that came out of my cd player from the orange on the aftermarket harness then grounded the ping wire (rear con wire) it worked fine but i couldn't see any footage from the camera for that i bought a long red power wire and hooked it to the red camera power wire that hooked from camera to reverse light and took the other end of the new wire i bought and hooked it to the orange wire that came out of the cd player now every thing works fine. you probably dont have the right power to run both cd and head lights thats why you need constant power to run both just hook up an extra wire between a positive wire to the orange dimmer wire its simple;

ground to ground (black)
12+ positive to 12+ positive (red)
and an extra wire (usually a red 18 guage wire bought mine at walmart) to the dimmer wire from the back of the cd player (orange) edit.gif

Mar 21, 2008 | Car Audio Receivers

2 Answers

No display on front pannel


I had this same problem. I solved it by connecting both yellow and red power supply cable coming from player to only yellow cable from my car. There was also red wire coming from car but things didn't work that way. I can't say I knew what I was doing so try on your own risk.

Mar 10, 2008 | Sony XPLOD CDX-GT200 CD Player

1 Answer

Getting power yet cd player does not even turn on


first off id check the wiring/grounds, if there ok try cleaning the faceplate pins w/ alchol and a qtip if that dont work its internal

Jan 02, 2008 | iLO CA3000V CD Player

1 Answer

Stopped working


Try getting in your car and turning on all of your accecories like windsheild wipers interior light turn signals ect.if other accesories are not working locate your fuse panel and look for a fuse that corresponds to an accesorie that is not working ,replace it and it should work.If the cd player is an aftermarket cd then they have an inline fuse on the back of the unit either directly plugged into the stereo or it there will be a fuse in one of the power wires.replace if blown and you should be fine,Rate me FIXYA! if this helps.GOOD LUCK.

Nov 18, 2007 | AudioBahn A1000N CD Player - CD Receiver...

1 Answer

No power


get a test light. check for good power on both the red and yellow wires with the key on. only one wire should have power with the key off... If one power is missing the deck will not work. Also make sure the deck has a good ground connection on the black wire.... if the unit has good power and ground and does not work the unit is probhably junk... i am willing to bet you are probhably missing a power though.

Sep 29, 2007 | Kenwood KDC-215S CD Player

Not finding what you are looking for?
Panasonic CQ-C7103U CD Player Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Panasonic Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...