Question about Samsung TV Remote Control

2 Answers

Samsung remote control

My remote control does not work, we've replaced batteries twice, this t.v. and remote are only 7 months old. can you help?

Posted by on

  • 2 more comments 
  • Anonymous Aug 29, 2008

    i have a samsung bn-59-00437a remote control that has suddenly stopped working, I have changed the battery and am not sure what else to try.Any suggestions, its under a year old


  • jennynixon Oct 14, 2008

    My remote is suffering from the same problem. I've tried new btteries and there's nothing blocking the signal either at the TV end or on the remote. Strangely the volume buttons work, and the mute, but nothing else. Help!

  • simon_cornel Nov 08, 2008

    Exactly the same problem. Samsung LE40F8 only 7 months old, remote not working. It lights up ok when buttons are pressed and the red sensor light on the TV comes on but nothing happens

  • hortiez Nov 26, 2008

    my samsung tv steals the signal of my direct tv control, i cant do anything but change the volume, but if i turn off the tv, i can change the sattelite channels, its like the tv is blocking the signal of my direct tv remote... anyone know about this??

×

2 Answers

Hey I had exactly the same problem but fixed by removing batteries and holding one button down for a couple of mins. Strange but seems to fix!

Posted on Oct 20, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remote control problem: your going to laugh at this but this was an easy fix, after my husband told me that there was something wrong with it, I tried to use the remote and he was right, it wasn't working. I changed the batteries that evening and sure enough it still wasn't working. The next day I had a closer look and thought that it wasn't right that a new t.v. remote wouldn't work, and lo and behold the problem? My housekeeper put a picture right in front of the electric eye of the t.v.! Guess what, it works quite fine again, thank-you for your time, and I am glad that it wasn't anything major. Peggy

Posted on Jul 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I NEED THE CODE TO MY SAMSUNG REMOTE 00052A, I'VE ONE DVD-HR775A/XEE THE REMOTE FOLLOWED WHEN I BOUGTH IT NOT LONG AGO BUT I HAVE BEEN MOVING IN THE MEANTIME SO IT HASN'T BEEN IN USE FOR SEVER


The remote control should be checked for its infrared emission. If you wish to get more details, visit this site. Pull up older posts there. One among it has detail description about how to check and repair or clean a remote control. Check the site with patience. I'm sure that you will get all details you wants to know.

Mar 29, 2013 | Televison & Video

1 Answer

Replaced batterys twice but remote can't access functions


Visit this site to get more details about how to check and repair a remote control. All details are there described. Type in "Electro-help" either in Google or yahoo search box and click search.
Don't forget to type in 'hyphen' in between words of site. The site will appear as this name.
Pull up older posts there. You can repair your remote control by youself.

May 08, 2012 | Tivo C00210 Remote Control

4 Answers

Ah59-02342a doesn't control tv anymore


Hi I had exactly the same problem with mine it worked the DVD player fine but not the TV even though previously it had worked both .......... Manual Guide In the manual guide I managed to dig out it says to do the following to set up the remote to work the TV

Press the TV button on the remote
Then whilst holding down the power button you need to enter in the samsung TV codes until your TV turns off (I only got to the first and it did it)
The numbers are 00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60, 98

Hope this helps

Feb 24, 2012 | Samsung TV Remote Control

1 Answer

So my urc-3021 used to work for my durabrand television. I went away for a few months and came back and the batteries needed changing. I changed them and the remote didn't work for the tv (although the...


then 0178 is not the right code if the light blinks twice try code search turn the tv on press tv then hold setup till it blinks twice then point the remote at the tv then press the power button repeatedly till the tv turns off then press the tv button again

Aug 28, 2010 | One For All URC-3021 Remote Control

1 Answer

Samsung 52....TV will not turn off


Call who you bought the TV and remote from and get it replaced with there warranty. No reason to put yourself through a headache when you are covered under warranty.

Feb 22, 2009 | Samsung Remote Control

2 Answers

Configuring Sky remote


1. Press tv on your Sky remote control.

2. Press and hold down select and the red button together until the red light at the top of your Sky remote control flashes twice.

3. Press tv again

Then enter the remote control code using the number keypad. The red light will flash twice if a valid code has been entered.

Samsung Code: 0060

4. Point your Sky remote control at your TV and press the Power button. If this turns the off as you'd expect, then the tv should be set, press Select and the remote should work

5. If the TV does not turn off press tv, then press the Power button again, repeat this process until the TV turns off, when the TV turns off press Select.

Sep 20, 2008 | Samsung AH5900092W Remote Control

1 Answer

Sky remote code


You will need to go to Sky's website and order a new remote if this doesn't work.

Press tv on the remote
press and hold Select and red until the remote LED blinks twice
type in 0 0 6 0
press power button on the remote, if the tv goes off press select and it should control all the tv functions.

if the tv does not go off press tv then power buttons on the remote and keep doing this until the tv goes off, then press select once the tv goes off.

Like I said earlier, if this doesn't work you will need to order a new/replacement remote via Sky's website then put the code listed above in.

Jul 18, 2008 | RCA RCR660 Remote Control

1 Answer

X-10 used for pool components


it could be that the remote get wet (water contact) did you try to use it agian ?

May 24, 2007 | X-10 HR12A Remote Control

Not finding what you are looking for?
Samsung TV Remote Control Logo

Related Topics:

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69718 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...