Emprex lcd no picture or sound just blue screen when come on

Hi,
Is this blue screen on all inputs (HDMI, etc.), or just on the one?
Does the remote control work, can you get the menu to display, is there any sound?
If no sound and picture, no menu etc., might be a software problem, the main PCB, or a missing voltage on this board.

TV TURN ON BUT ONLY BLUE SCREEN NO PICTURE SOUND OK NO DISPLAY,

Is this problem occurring while watching any channel or while playing any DVD?

Yes it can be repaired usually just easier to by a new one. it sounds to me like it is a power supply for the monitor. The only hard thing would be getting the power supply for the monitor. Your can try contacting the manufacturer for it :) hop this helps

shine a light on it while it is dark..if you see a picture ..it is the backlight.. usually a loose cable.

acoustic solutions lcd tv when i switch it on the screen flashes blue, green then red no picture??? it was working ok last night any ideas?

Ur LCD inverter board it dead.Must replaced to get picture back.It usally along board.

This sounds like a backlight problem. I've had this with an acer laptop before and it needed a new backlight replacment under warranty.

Also check things like the connection cable, try it with a different pc, try a different (lower) screen resolution in case it's not compatible.

There is a repair service which addresses any problem with the power supply board, not just bad capacitors: http://www.coppelltvrepair.com/p/781/emprex-hd-3202-power-supply-board-repair-service-no-power-shutdown-etc

Does this happen on All inputs? Let me know. Thank you Jay.