- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your flyback has failed most likely...bad new is they are nearly impossible to find, This is a known issue on most of the models below. The site Tv Repair Kits can sometimes get replacements - but its not often.
This repair kit is known to work on Magnavox TV sets with the following Chassis/Model Numbers.
you will require two of the STK392-120 Convergence ICs and possibly the 6.8 ohm resistors. The Phillips DPTV305 - DPTV335 convergence repair kit available from www.tvrepairworld.com has the two ICs and the 12 resistors plus the CD with repair instructions.
Thats caused by failed convergence ICs ( stk392-120 ) and possibly some of the 6.8 ohm resistors have failed ( 12 resistors total) you can get the phillips DPTV305 - DPTV345 convergence repair kit which fits your model and it contains the 2 ICs, heat sink paste and the 12 resistors plus the CD with repair instructions. The kits available at www.tvrepairworld.com
Thats the convergence Ics and resistors needing replacement. The Phillips DPTV305-335 and MAG01 convergence repair kit from www.tvrepairworld.com is the correct kit for that model and symptom. The kit contains the two ICs and 12 resistors plus the CD with repair instructions.
The convergence ICs need replacement and possibly the 6.8 ohm resistors. You can get the phillips DPTV305 - DPTV335 convergence repair kit from www.tvrepairworld.com which fits your model. The kit contains both ICs and the 12 resistors pluds the cd with repair instructions.
the DPTV305 - DPTV345 convergence repair kit at the following link should repair that issue. The kit includes the replacement parts and a CD with detailed repair instructions. http://www.tvrepairworld.com/
you may find the schematic but the chips inside is mcu IC with clock. the schematic usually compose of infrared led, limiting resistor, micro, switch and clock. this is tv, what possibly you can do is buy a universal remote control or another philips tv remote control. hope this help. regads, cebuwano
Convergence circuits have failed you can get the DPtv305-DPTV345 convergence repair kit at the following link. The kit contains Both ICs and all 12 feed resistors plus step by step instructions on how to do the repair. http://servicemanuals.vstore.ca/
You should have used 180s for replacement,and check all low ohm resistors near ics.And alot of time when you replace them you have to have service code to be able to Factory converges and realine.Need help let me know.