Question about Jack Lalanne Power Juicer (Stainless Steel)
Jus got fron home shopping club .got top off but can not get screen or glade out to clean did not get any instructions
Take off the top part of the juicer that has the chute. You will see the blade and basket. The blade appears to be attached to the basket with three small screws but is actually screwed onto the basket by a large screw that protrudes out of the basket underneath the blade. So the trick is to unscrew the blade, turning it to the left by using maybe a small screwdriver that you will have to put into one of the two small holes that are on the blade surface and pushing the blade to the left. This should loosen the blade and then you can just unscrew the blade off the basket. Once you get that blade off, the rest of the juicer comes apart. The newer models come with a little tool with a couple of arms that go down into those holes and loosen the top. Good luck.
Posted on Jan 02, 2009
In the Jack LaLanne's power juicer,"Secrets of power juicing" booklet under the title of "Helpful hints," you will find the following instructions. Cleaning can be made easy by placing a platic bag inside the pulp collector container. When you are done juicing, the bag can be lifted out and disposed of easily leaving the pulp collector easier to clean. Let the Power Juicer run for a few minutes before turning off the allow any excess juice to be extrated from the pulp. Once turned off it is quite normal for the juicer to spin for a minute or so due to the very fine precision balancing of this appliance. Wait until it is done spinning before disassembling. However, I didn't find any instructions on how to disassemble the unit spinning parts for cleaning nor did I find a breakdown of the unit's parts list in the shipping box. Good luck
Posted on Aug 31, 2008
The part that you are trying to get off, the shredder and strainer (on the breville je90j anyway) is clipped on and held with three ballbarings and will pull off with a bit of pulling and wriggling. I put some sewing machine oil on the ballbarings after I worked out how to get it off and it was easy after that.
Posted on Aug 03, 2010
Tips for a great answer:
Dec 25, 2011 | Jack Lalanne Juicers
Feb 23, 2011 | Juicers
Oct 05, 2009 | Jack Lalanne Power Juicer 250 Watts
Sep 14, 2009 | Juicers
Sep 03, 2009 | Juicers
Jun 28, 2009 | Jack Lalanne Power Juicer 250 Watts
Jun 16, 2009 | Jack Lalanne Power Juicer 250 Watts
Jan 19, 2009 | Jack Lalanne Power Juicer (Stainless...
884 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: