At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Consult the camera manual and find out if this camera has a re-set button.
If so, follow the directions in the manul to re-set.
If not, a trained tech is the next stop.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
We repair these A LOT! The jack is unbalanced on the Main Board and is easily detached by normal wear and tear. Soldering the jack back on to the board is a little tricky but the real repair is getting the port sturdy to prevent the issue from re-occurring.
We do a full repair by removing the old solder on the board and the jack then reattach using flux and fresh solder. We also stabilize the port so it doesn't happen again.
You can send it from anywhere in the US and we'll repair it for $39.95 which includes return shipping. I strongly recommend replacing the micro usb / charging port for an additional 9.95
www rockhoptec com
please call or email with any questions!
(585) 487-8220
alex @ rockhoptec com :)
this kind if problem u can easily fix by urself own without much
technical knowledge.......... u can fix this by using repair guide in net.......... this will surely helpfull to u more.........
click here to download
Please try to reset your printer to erase the present/current job that is not yet finished due to some interruption. So i recommend that if this problem occur please rest your printer by turning off and unplug all its wires then after few minutes plug it and turn it on to automatically reset its default setting and erase its job that is not finished.
×