Question about Audio Players & Recorders

2 Answers

Zipy Kanguro Radio Tuner

I just bought one of these and cannot for the life of me get the radio to work on it.
I tried reading the manual that comes with it and it doesnt really help as it says it will play automaticly but doesnt.

I have done the searching and saving of channels bit but nothing happens it just stays quiet.

Any help much appreciated as I hope im just doing something wrong and its not faulty

Posted by on

2 Answers

The radio does not work without the headphones plugged in. Also, make sure that you have set your region in the settings.

Posted on Aug 22, 2008

Most small devices rely on the wire plugged into the earphones jack to be the antenna to receive the radio signals, so if you are trying to listen to the radio through the builtin speaker without having earphones plugged in, you might just not be getting a signal, and since it is a digital tuner, it probably can tell that you are not getting a signal and so just outputs no sound, not even static.

so try plugging in some headphones if you haven't been doing that.

Posted on Aug 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electrohome ean 0s700 radio wont play


Check the aerial connection. Some FM radio's will mute the static and only pick up strong signals. If it is an FM AM radio check the AM radio. If that is OK and the connection's are good you might have faulty Tuner circuit, which would need a trained technician to look at.

Dec 10, 2014 | Audio Players & Recorders

1 Answer

How do I display the radio ID number, so that I can listen to Satellite radio?


Verify if the radio is "Satellite ready" or if it comes with the remote tuner unit. I believe you have to buy a separate tuner add-on and antenna in order to activate the satellite circuitry - THEN it will show you a radio ID. I think ONLY the Alpine comes with the tuner. I would call Crutchfield and they can tell you what all you need with that tuner to make it work with the satellite radio.

Jan 14, 2012 | Panasonic CQ-DF783U CD Player

1 Answer

I just bought the RCA CD/DVD home theater system RTD206. I cant figure out how to change the radio channels. Also cant figure out how to change the cd disk tracks. Does this system have a remote. Or do...


The system does have a remote (at least it should come with one if purchased new), and you need it to control pretty much everything. Here's what the manual says about the radio tuner (you can find the whole manual here) :

Manual Tuning
1. Connect the FM aerial and the AM loop antenna at the back of the unit. Rotate the AM loop for
better reception.
2. Press TUNER to enter TUNER mode and toggle between FM and AM.
3. When the FM station broadcasts Stereo sound, ST is displayed.
4. Tune a station by pressing repeatedly the TUNER+/- buttons until the desired station is found.
Alternatively, you can press and hold the same buttons down for about one second to activate
the automatic search function. In this mode the player will automatically tune frequencies until
it finds a station.
5. Repeat step 4 to tune to another radio station.

Storing radio stations
The player can store up to 30 radio stations in its memory. You can enter every single radio station
yourself or the player can store all available radio stations automatically in ascending order.
Automatic preset programming
1. Press TUNER to enter the Tuner mode.
2. Press and hold TUNER down for 3 seconds to start automatic preset programming.
Note: A weak signal can affect the "Automatic preset programming" function's efficiency. Adjust the aerial for better
reception and a more efficient search.
3. Radio frequencies will be browsed and radio stations stored automaitcally. When all the available
radio stations are stored or all 30 memory locations are full, the auto preset programming
function will stop.

Manual preset
1. Tune to a radio station (see "Manual tuning" for details).
2. Press MEMORY once to enter flashing Preset Loaction number.
3. While the Preset Location number is still flashing, input your desired preset number (1-30) using
the numeric buttons or press the CH+/- buttons, then press MEMORY to store it.

Retrieving preset stations
1. Press TUNER to enter the Tuner mode.
2. Press CH+/- to search up or down for the preset stations or directly press the numeric buttons.

As you see, you really need that remote. The same is true for disc play. While there are front panel buttons for play/stop, disc skip, and drawer open/close, you don't have any other control without the remote. Without the remote control you'll find this system won't do too much, unfortunately. If you bought this new, check the packing material before you throw it away to make sure the remote's not still somewhere in the box. They often come tucked into slots on the foam inserts.

Also, when you hook the unit to a TV, it's just using the TV as a video display device. The TV has nothing to do with any of the system's other functions.

I hope you have luck locating the remote! Thanks for using Fixya.

Jun 29, 2011 | Audio Players & Recorders

2 Answers

Hi, I have a window7 toshiba satallite pro, laptop.and I need fm radio tuner software to download, Is it posible in any site? pls help me.


Hi there , Try using http://www.sharewareconnection.com/titles/radio-tuner.htm
Hopefully you will come right.Good luck
Thanks

May 22, 2010 | Philips SAA7130 TV Tuner/FM Radio/Video...

2 Answers

How do I manually tune a Ford Focus 6006 Radio


Press the Menu button. At some point it'll put an 'M' next to the station frequency. Then hit the seek up and down button.

Dec 12, 2009 | OEM Systems Car Audio & Video

1 Answer

Lost Sirius Radio:


Goto sirius.com and login to your account. Check the account status and see if its active and enabled.  If it is contact the 800 number for customer service to have the radio reactivated.  
Does channel 184 work?

Sep 13, 2008 | Kenwood KDC-MP235 CD Player

1 Answer

FM transmission on a zipy kanguro


I solved the problem...just plug the earphones...

Aug 29, 2008 | Audio Players & Recorders

5 Answers

My zipy kanguro mp3 mp4 player won't turn on other than the red light by the menu imprint. Any suggestions?


any1 knows how to use the cd? becuase my zipy knaguro doesnt support m4a files and avi video..
please help me

Jul 10, 2008 | Kanguru Audio Players & Recorders

2 Answers

Car radio not working


Sound like you need the manual to this radio, I would have said that there are components inside that go bad that will cause a radio not to light up in the display area. But if you radio is saying tuner, and maybe cd then it would be the selector button that has a problem. Or no antenna is hooked up or come apart.

Sep 11, 2007 | Sony CDX-L480X CD Player

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

4872 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...