Question about Roland Mv-8000 Sampling/Record Production Studio System

3 Answers

MV8-VGA BOARD I NEED SOME HELP LOCATING THIS BOARD CAN YOU HELP WITH THIS PLEASE, IT IS VERY HARD TO FIND IN MY AREA

Posted by on

  • Vladmk Dec 03, 2008

    I needed too...

  • Anonymous Mar 29, 2009

    I need this board so please halp me!!!

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi.

There is one here at the moment.
http://www.soundonsound.com/readersads/Search.php?ProdDesc=mv8&Cat=+&ManufName=&NoDays=30&OrderCat=1&OrderDatAZ=2

Posted on Dec 13, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found one for you on Ebay!!

Roland MV-8000 "MV8-VGA"

Posted on Jun 30, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I TRIED TO FIND THIS BOARD UNSUCCESSFULLY FROM REGULAR AND ONLINE MUSIC STORES. THROUGH ROLAND SALES REPS, I LEARNED THAT THE PART WAS ON NATIONAL BACKORDER AND SCHEDULED TO BE DISCONTINUED. THIS WAS ALMOST TWO YEARS AGO IN 2007. I HAD LUCK TRYING REPAIR SHOPS THAT SERVICED ROLAND EQUIPMENT AND OWNERS WHO HAD THE CARD INSTALLED ALREADY. TRY CRAIGS LIST, AND MV NATION

GEO (GEO Production and Audio Svs.)

Posted on Mar 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to connect a subwoffer VGA with an stereo receiver. Do you know where I can find a cable to do this?


i have hts 3455/98 i connect perfectly all cables but sound is coming from only one speaker. pl help me about this problem.

Mar 28, 2013 | Philips HTS3450 System

1 Answer

My recording studio is stuck on the project load screen


Your VS-2000 is showing symptoms of fragmentation--resulting in the unit freezing or failing to completely load. The only possible solution is formatting the hard drive. Formatting erases all data on the drive.

Note: If you have any files that you need to keep, you may contact our Roland Customer Support department (323-890-3740) to arrange a "Data Recovery" service. Our service technicians can attempt to recover any data that is in your hard drive. Customer Support is available M-F 8:30am-5:00pm Pacific time.

CAUTION!!! Formatting the hard drive erases ALL recordings and data on the drive. This includes any installed plug-ins as well. Be sure to back up all of your project data (recordings) and plug-ins to CD/DVD(s) before formatting the drive.

Unlocking the System:
1. With the VS-2000 powered off, press and hold the TRACK/STATUS button for track 4 and the FX 2 button.

2. With both buttons pressed, turn on the VS-2000's power. Continue holding the two buttons until the display has loaded completely. This can take several minutes.

3. Once the system has loaded completely, release the buttons.

Formatting the Hard Drive:
Note: The format steps below pertain to using the VS-2400's on-board LCD screen. If you're using an external VGA (video monitor), press and hold HOME and press F6 to switch to the on-board LCD.

1. Press SHIFT AND F1/PROJECT.

2. Use the CURSOR buttons to Select "IDE:0".

3. Press PAGE until "FmtDrv" is displayed above F2.

4. Press F2.

5. CURSOR to "Physical Format".

6. Turn the TIME/VALUE dial until "ON" is selected.

7. CURSOR to "Surface Scan".

8. Turn the TIME/VALUE dial until "On" is selected.

9. Press F5 (OK).

10. Press ENTER/YES twice.

Oct 13, 2011 | Roland Vs-2000CD Digital Studio...

2 Answers

When i turn on my cinema system 'Protection' come's up then it turns off. Help please


Its the ic audio amp board.......disconect the board and u will see the power turns on.....i have the same problem .......cant be repaired the cost is to expensive....i have put 2 fan on the ic board it keeps the unit cold and can play it about 5 hours daily
6_6_2016_5_43_05_am.jpg

Nov 13, 2010 | Samsung HT-TZ215R Theater System

1 Answer

The red light stay on it will not show green


corrupt board maybe affected.. mainly its memory.. need to replace new board for that...some causes if you dont turn it of properly or either low voltage area

Nov 12, 2010 | Apex Digital HT-150 System

1 Answer

Connecting a computer to a LX3600D Home system


Lots of people are doing this and part depends on what your home theatre has to offer in the way of connections.

For sound most use the LINE OUT on a computer or laptop and connect that to a suitable input on the receiver using a 3.5mm to stereo phono lead.

If you are lucky enough to have an OPTICAL sound out on your computer and one on the home system that would be a better option.

For the video side again it depends on what your computer has to offer

If it has DVI and your TV or home system has DMI then that is the very best option. remember to lower the resolution on the computer first and to check and of your graphics card options for dual display. A DVI to HDMI lead is needed for that

Nvidia graphics cards seem to work best in this area.

If you have a VGA connector on your TV that is another great option and you would only need a VGA lead.

Some cards and laptops have S-VIDEO out. Lots of TV's and home systems have these and the display is quite reasonable. If using S-video connections use a GOOD quality cable.

Some people can only obtain a black and white picture so check your graphics card did not come with any special adaptor.

Another method is composite video Even that is not always 100%

Some laptops need a special S-video adaptor which is just a short little cable to properly enable the S-video and convert S-video to composite. That is probably the worst way to do it.

Using a VGA to component lead is also an option but results vary wildly from no picture to quite good. A lot depends on the quality of the lead once again.

I use the optical sound and DMI lead to power a 50" Sony with great sound and picture.

Sep 19, 2009 | Philips LX3600D System

2 Answers

Info on the SW9800 Subwoofer


I would like to buy your subwoofer for my broken system. Please contact me ASAP

adam.roseneck@gmail.com

Dec 23, 2008 | Philips Cineos HTS9800W System

1 Answer

Yahoo massenger


I cant sign on my yahoo massenger:) its return me back to sign in area ..
I tried too many times and i reinstall the massenger again but without result
please help me
thank you
Regards

Jul 06, 2008 | Yahoo YHT-630 System

1 Answer

I need to find a place to buy one roland vs 2480 cd replacement fader board


You should contact Roland to find out who their parts dealer is for your area. Once you are on their site, click on the Support tab.

http://www.rolandus.com/


Jerry G.

Jun 04, 2008 | Roland Vs-2000CD Digital Studio...

1 Answer

Lost individual fader use


Hi Fader free

It is bad news I would day, you would have to pull the unit down and see what happened, probably find a cracked pcb i would say, and iy this is in the fader area, where hands on produce movement about this area all the time, then repair may be difficult, board replacements may be the only option. Check it out for a simple crack repair job. worst case, I suggest looking for another off ebay, perhaps a faulty one with a dead harddrive or something may be the best approach for a cheap repair.

regards
Graeme

Feb 08, 2008 | Tascam 2488 Portastudio Multitrack...

1 Answer

Tascam 2488 SDRAM error


Jose

I had the same problem. I sent it back to my place of purchase and they sent it to an authorised Tascam repairer. Unfortunately they sent it back twice saying it was fixed when it wasn't. They then decided it needed a ne main board which was going to cost $800 AUS, excluding any labour to install it. In the end I got angry and went straight to the TASCAM distributor and told them my problem and that it was unnaceptable that such an expensive unit needs a new main board in such a short space of time. To my surprise they came back and agreed to replce the main board for fee and the service repair centre did not charge me either. DON'T pay for this. It is obviously some problem with the unit. RING TASCAM in your area or the authorised distributor.

Hope this helps.

Jan 28, 2008 | Tascam 2488 Portastudio Multitrack...

Not finding what you are looking for?
Roland Mv-8000 Sampling/Record Production Studio System Logo

Related Topics:

499 people viewed this question

Ask a Question

Usually answered in minutes!

Top Roland Audio Players & Recorders Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Joseph Mueller
Joseph Mueller

Level 2 Expert

335 Answers

Are you a Roland Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...