posted by ste_wocky on Jul 22, 2008
I'm getting zilch when I try the on/off switch. I tried to turn it off and on but it cut out once I pressed 'on'. Anyone had this happen to them before and if so, was it just a power supply problem or more complicated?
Suggest a new solution for this problem
Post a New problem for Akai MPC-4000 Plus Production Center
Email this problem
Post a New problem for Akai MPC-4000 Plus Production Center
Email this problem
Can you Help with these Sound Cards problems?
Akai MPC-4000 Plus Production Center (w/80 GB...
MPC-4000 Error on Boot (Boot...
MPC-4000 Error on Boot (Boot...
MPC-4000 Error on Boot (Boot... Answer This...
Akai MPC-4000 Plus Production Center (w/80 GB...
formatting an akai disk
formatting an akai disk
formatting an akai disk Answer This...
Akai MPC-4000 Plus Production Center (w/80 GB...
My akai mpc 4000 is
My akai mpc 4000 is
My akai mpc 4000 is not... Answer This...
Akai MPC-4000 Plus Production Center (w/80 GB...
MY MPC 2OOO WONT LOAD
MY MPC 2OOO WONT LOAD
my mpc 2ooo wont load up sounds... Answer This...
Repair Service
Find Sound Card Repairman Near You:

