Question about RCA Audio & Video Receivers

2 Answers

I lost my codes and directions on how to program my universal rca remote

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 97 Answers

  1. Manually turn ON your device (TV, VCR, Cable Box)
  2. Press and "HOLD" CODE SEARCH
  3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
  4. Release CODE SEARCH.
  5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
  6. Once the device turns off, press and release ENTER.
  7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

    for codes on your product please visit
    http://www.thompsontv.com/rcarc.html

    this will help you find your code for your remote. then follow the steps i have posted above. thanks bye.

Posted on Jul 22, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 382 Answers

Hi ,
I have given the following links which have the step by step process for programming universal rca remote

http://www.thompsontv.com/rcarc.html

http://www.ehow.com/how_9191_program-rca-universal.html


Thank you!!

Posted on Jul 22, 2008

  • Natesan Sabesan
    Natesan Sabesan Jul 22, 2008

    Hope this helps you..please post back on how things turned on or for further assistance buddy!..

    Thank you!! Regards!!..


  • Natesan Sabesan
    Natesan Sabesan Jul 22, 2008

    This is how you can do it manually My friend..But i would kindly recommend you to visit the links so you can have a more brief idea..


    • RCA Universal Remote Control


















    Step1:
    Turn on the component you want to program.





    Step2:
    Press and release the component button on your remote that corresponds
    to the component you want the remote to operate (TV, VCR, etc.). The
    illuminated ON-OFF button will turn on and remain on.




    Step3:
    Press both the component and the ON-OFF buttons. The illuminated ON-OFF button will turn off, and then will come back on.





    Step4:
    Release both buttons after the ON-OFF button turns back on. The button should remain illuminated.





    Step5:
    Press and release the PLAY button. If the component does not respond
    after five seconds, continue to press the PLAY button every five
    seconds until the component turns off.




    Step6:
    Press and release the REVERSE button when the component turns off, then wait to see if the component turns on again.





    Step7:
    Press and release the STOP button to save the new code.




×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need universal remote code for technics receiver sar530


Go to the remote manufacturers website. Manufacturers assign their own codes to each program so the code for your receiver on a rca remote won't be the same as on a one 4 all remote. Sometimes they're even different in the same brand but different models of remote

Oct 16, 2016 | Technics Audio & Video Receivers

1 Answer

Code for magnavox converter box tb100mw9


You need a recent model RCA or possibly Philips universal remote that contains specific codes for the Magnavox STB.

Oct 12, 2016 | Magnavox Tb100mw9 Digital Tv Converter Box...

1 Answer

Will the codes for the remote from the system's manual work for any other remote?


The picture suggests you may be trying to use an RCA universal remote to control your receiver. If this is correct, you can use the code search feature to find a suitable code. If you search through all codes stored in the remote without success, you may have to try another universal remote. All universal remotes do not store all possible codes.

Aug 15, 2015 | Audio & Video Receivers

1 Answer

How can i program my remote? I lost the booklet to progrm it and all the codes were in that booklet


open the battery compartment ,remove the batteries and copy down the model number,you can then do a search for the manual online.

Jul 18, 2014 | RCA Universal Tv Digital Converter Box...

1 Answer

Codes for a rca converter box remote control


Try using directv's :remote control code search engine)search for "Directv remote control programming" enter your device type and it will give you the most recent code for your device

Mar 08, 2014 | RCA Universal Tv Digital Converter Box...

1 Answer

Need codes for rca remote for digital converter box so i can program it to my philips magnavox t.v


There's a universal remote in Home Depot n is only four bucks and even has a code for blue ray maybe that will work

Jan 07, 2013 | RCA Universal Tv Digital Converter Box...

1 Answer

I have a rca universal remote and lost the instructions. please, do you have the code for a sanyo tv?


For Sanyo tv use one of these codes: 017,021,039,056,057,058
Go ahead with programming with these steps:
-Press and "HOLD" CODE SEARCH.
-Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
-Enter the three digit code from the TV, VCR or Cable Box code lists.
-Release CODE SEARCH.
-With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the provided.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

Sep 14, 2010 | Audio & Video Receivers

1 Answer

RCA Universal Remote Programming Instructions RC800L-C 1239


if u do not have the code most universal remotes will allow you do it manually and you will have to follow these steps and insted of putting the code you can turn the tv on then press the on/off button on the remote till the tv shuts off then press enter

Aug 21, 2009 | Technics SA-EX140 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Audio & Video Receivers Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Rod
Rod

Level 2 Expert

224 Answers

Lawrence Oravetz

Level 3 Expert

7686 Answers

Are you a RCA Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...