Question about Washing Machines

2 Answers

Error code PFE

Machine stops before last spin cycle Error code PFE shows up on display screen. Just out of warrenty and troubleshoot guide has nothing about it.

Posted by on

  • matt green Jul 22, 2008

    Nec NFL-1065 front loader washing machine. PFE error code shows when machine stops before last spin cycle.

  • robert samples May 11, 2010

    please post the model and brand and ill see what i can do

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I hd zs problem before,z pump

Posted on Dec 19, 2011

  • 1 more comment 
  • andrew ysf Dec 19, 2011

    I hd zs problem before,z pump

  • andrew ysf Dec 19, 2011

    I hd zs problem before,z pump

  • andrew ysf Dec 19, 2011

    I hd zs problem before,

×


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

I dont have data on this specfic machine but from experence id say check the drain pump for blockage or something jamming the pump but reamber there is water still in the tub when you check this i reccomend if you have a shop vac pull the water out through the drain hose before checking the drain pump

Posted on Jul 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

3 lights and loud beeping


When you start your machine is the water just go stop go stop,
Just wait for the machine to display an error code on the wash progress lights and beeps constantly.
It could be the Rotor Position Sensor, out of balance switch or lid magnetic reed switch.
Your error code will determine this.
Is your machine beeping & showing a weird pattern of lights on the wash cycle, It is displaying an error code,
To read this error code you start at the red spin light & work to the left only add up the lights that are on. Red spin light = 1 2nd rinse light =2 1st rinse light =4 last wash light=8 4th wash light=16 3rd wash light=32 2nd wash light=64 1st wash light=128
j8paojvh5jrgaaaaabjru5erkjggg==


2_26_2013_3_17_31_am.jpg

Dec 12, 2013 | Fisher and Paykel Washing Machines

1 Answer

Model Gw709AU


When you start your machine is the water just go stop go stop,
Just wait for the machine to display an error code on the wash progress lights and beeps constantly.
It could be the Rotor Position Sensor, out of balance switch or lid magnetic reed switch.
Your error code will determine this.
Is your machine beeping & showing a weird pattern of lights on the wash cycle, It is displaying an error code,
To read this error code you start at the red spin light & work to the left only add up the lights that are on. Red spin light = 1 2nd rinse light =2 1st rinse light =4 last wash light=8 4th wash light=16 3rd wash light=32 2nd wash light=64 1st wash light=128
j8paojvh5jrgaaaaabjru5erkjggg==


2_26_2013_3_17_31_am.jpg

Feb 20, 2013 | Fisher and Paykel Washing Machines

2 Answers

Samsung Model WF220 won't spin after it fills with water. It displays Error code 3E.


This video will help you diagnose the fault on Samsung Model WF220 3e error codes and the video will help you solve the problem

Sep 08, 2012 | Washing Machines

1 Answer

Displays PFE


The washer will stop during spinning .
Spinning is insufficient. Error display PFE
Is the filter of the drain pump clogged?
Is the drain pump operated?
Did you use the proper amount of detergent?
Is the drain hose placed higher than 1m above floor?

Mar 11, 2012 | Washing Machines

2 Answers

What does E27 on display mean


Bosch washers come with built-in sets of error codes used to diagnose and correct common problems. The E27 code isn't often listed in Bosch manuals but relates to the washer door lock

The E27 error flashes on the washer LCD screen and stops the current load. Unplug your washer for 30 minutes and then plug it back in to reset the code.

Open and close the door two or three times to reset the sensor. Sometimes the door has been closed too hard and the sensor reading fails.

Mar 10, 2011 | Bosch Washing Machines

1 Answer

Code LL flashing. Will not complete a cycle.


The LL error code is not documented very well.

Can you tell me what point of the Wash Cycle the Cycle Status LED is in when you error out with the LL error code?

I believe it will be in the Spin Cycle of the wash cycle.

You could try a Quick Spin test and see if the wash basket will spin up to 850 RPM with no laundry in the Wash Basket. See Page 14 of the Service Manual and see if the Wash Basket will spin up to 850 RPM.

You could also check the TDS for proper range of motion using the SM or this typed out process.
Tub Displacement Sensor Diagnostics check.
It is possible the Tub Displacement Sensor may have failed try this check which is in the Troubleshooting guide stored in your washer console or refer to the SM.

a. Enter the Service Mode by pressing and holding the Enviro Plus and Spin Only keys for three seconds or the display reads “00”

b. Press the Super Wash key display reads “in”…something like that.

c. Press Delicates the Display will show “UC” (Unbalance Closed).

d. Push tub to the back right corner of the machine the display should change to “UO” (Unbalance open). Release tub and the display will show “UC” (Unbalance Closed).

e. Press Hand Wash.

f. Pull tub to the front left corner while pushing the tub down the display should change to “UO” (Unbalance open). Release tub and the display will show “UC” (Unbalance Closed).

If you fail this test it would be time to remove the machine front cover check if the TDS sensor has fallen of its mounting position between the Tub and the washer frame.

Jul 11, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Neptune tl washer will go half way threw cyle,start to spin,stop and start to spin,stop and start to spin .tried to unplug it restart and nothin, tried different settings still nothing. tried moving the...


If your machine is a FAV6800A to FAV9800A here is the Service Manual.
If it one of those machines I suspect a possible clutch malfunction.


See this post for what is involved to do clutch maintenance or replacement.


Do you have any error codes to the display if it's a FAV6800A such as dC or uC unbalance codes. Is the wash tub banging around on Spin Cycle of the Wash Cycle? ……Rich

Feb 06, 2010 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

Daewoo DWD-F1011 PFE error code


I hd zs problem before,no problems in z water outlet,z pump

Nov 16, 2009 | Daewoo Washing Machines

1 Answer

Neptune TL, stops at the 11 minutes to end and will not go past, I have to shut off, hit spin cycle to finish load


Hello krabby64

Is your FAV6800AW or FAV9800AW failing with error codes dc or UC or both to the Console display? If you are I believe you are experiencing a clutch malfunction with your machine. Take a look at this post and see if your problem is similar.  

If you have error codes to the display when the machine fails in the last 11 minutes (I believe start od spin cycle) can you let us know what those error codes are?


Oct 19, 2009 | Maytag Neptune FAV6800AW Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

684 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...