Question about Transcend Tsonic 820 MP3 Player

1 Answer

Detecting problem not detecting to PC . but charging while connected to PC and need to reset every time.

Posted by on

  • 1 more comment 
  • mutthusivaji Oct 17, 2008

    getting charged but not beibg recognised by pc

  • Anonymous Oct 30, 2008

    same with t.sonic 850 - worked fine for a couple of months. Suddenly the player is not recognised, neither with XP nor Vista.

  • Anonymous Mar 16, 2009

    same problem canu helppp

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Problem that T.sonic 820 transcend ipod does not connected to pc

Posted on Oct 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver samsung yp u2


See if these help:

Music files will not play
If ripped from a CD, It's possible that the copy protection in Windows Media Player was checked. This would limit the times a file can be played or transferred. Verify the audio quality is no lower than 128 Kbps when ripping.

Reset your MP3 player
Press the reset hole with a thin object such as a paper clip. If your player is freezing during a specific file, the file(s) could be corrupt and should be deleted from and re-transferred to your device.

  • Format your MP3 player
  • Upgrade or reinstall your firmware

If your device doesn't display "Charging" or "USB connected" while connected to the PC, the battery may be completely drained (or faulty) and it may take a few minutes before the PC detects the player and begins to charge it. If after ten minutes the player isn't detected, try using another USB port on the PC.

  • The battery may be exhausted and will require replacement.

Support page for YP-U2JXB
Media Players

Feb 03, 2014 | MP3 & Digital Media Players

1 Answer

My sansa view will not finish turning on. It stops after sandisk sansa apprears on the screen. How do I fix this?


SOLUTION 1 - Make sure player is fully charged.
1. Connect the player to the PC.
2. Make sure the computer detects the player.

NOTE: If needed, switch the player to MSC mode, then connect it to the PC.

3. Leave the player connected for approximately 2 hours to charge.
4. Disconnect the player from the PC.
5. Verify if you can turn on the player.
6. Reset the player if necessary.


SOLUTION 2 - Reset the player.

http://www.doremisoft.net/Sansa-articles/Convert-video-to-Sansa-on-mac-osx/

Feb 25, 2010 | SanDisk Sansa View 8GB MP3 Player - Black

1 Answer

Sansa clip on turn on


can u more specific? u mean how to turn on your sansa clip or your clip can't turn on?
if the first one:
u may can see the instructions.
if the second one:
SOLUTION 1 - Reset the player.

SOLUTION 2
- Make sure the player is fully charged.
1. Connect the player to the PC.
2. Make sure the computer detects the player.

NOTE: If needed, switch the player to MSC mode, then connect it to the PC.

3. Leave the player connected for approximately 2 hours to charge.
4. Disconnect the player from the PC.
5. Verify if you can turn on the player.
6. Reset the player if necessary.

Feb 25, 2010 | SanDisk Sansa Clip MP3 Player

1 Answer

Blank screen wont turn on or off


Make sure player is fully charged. Connect the player to the PC. Make sure the computer detects the player.
NOTE: You may need to switch the player to MSC mode, then connect it to the PC.
Leave the player connected for approximately 2 hours to charge. Disconnect the player from the PC. Verify if you can turn on the player. Reset the player if necessary. Then you may need to reset the player. Slide and hold the Power switch up for approximately 20 seconds. Release the Power switch. To turn the player on, slide the Power switch up then release right away.

Feb 14, 2010 | SanDisk Sansa e250 MP3 Player

1 Answer

My sansa will not turn on


Make sure player is fully charged. Connect the player to the PC. Make sure the computer detects the player.
NOTE: you may need to switch the player to MSC mode, then connect it to the PC.
Leave the player connected for approximately 2 hours to charge. Disconnect the player from the PC. Verify if you can turn on the player. Reset the player if necessary. Reset the player. To reset -- Slide and hold the Power switch up for approximately 20 seconds. Release the Power switch. To turn the player on, slide the Power switch up then release instantly.

Feb 14, 2010 | SanDisk Sansa Fuze MP3 Player

1 Answer

When I disconnet the sync cord and go to turn on the sansa e-250 it doesn't turn on


Make sure player is fully charged. 1. Connect the player to the PC. 2. Make sure the computer detects the player.
NOTE: If needed, switch the player to MSC mode, then connect it to the PC.
3. Leave the player connected for approximately 2 hours to charge. 4. Disconnect the player from the PC. 5. Verify if you can turn on the player. 6. Reset the player if necessary.

SOLUTION 2 - Reset the player. Resetting the player: 1. Slide and hold the Power switch up for approximately 20 seconds. 2. Release the Power switch. 3. To turn the player on, slide the Power switch up then release instantly.+

Feb 13, 2010 | SanDisk Sansa e250 MP3 Player

1 Answer

Mp3 player froze when plugged into pc. screen is blank but lit. is charged. what do i do?


Make sure the player is fully charged.
  • 1. Connect the player to your computer.
  • 2. Make sure the computer detects the player.
NOTE: If needed, switch the player to MSC mode,
  • 1. Turn device OFF.
  • 2. Slide the Hold switch down to Lock (orange color showing).
  • 3. Press and hold the center button while connecting the device to the PC.then connect it to the PC.
Next Be sure the battery is charged
  • 1. Leave the player connected for approximately 2 hours to charge.
  • 2. Disconnect the player from the PC.
  • 3. Verify if you can turn on the player.
  • 4. Reset the player if necessary.
To reset the player:
  • 1. Press and hold the Power/Menu button for approximately 20 seconds.
  • 2. Release the Power/Menu button.
  • 3. Press the Power/Menu button again to turn on the player.
If that does not do it, re-seat the battery: Then try and see if it will come on with out the battery but hooked to your computer.

Feb 02, 2010 | SanDisk Sansa e250 MP3 Player

1 Answer

Without warning and without any impact or damage, it just stopped working, no power, nothing. And it's not a battery issue, the battery was almost completely charged.


Try and reset again. 
1. Slide and hold the Power switch up for approximately 20 seconds.
2. Release the Power switch.
3. To turn the player on, slide the Power switch up then release instantly.

Part 2 - Make sure the player is fully charged. 
1. Connect the player to the PC. 
2. Make sure the computer detects the player. 
NOTE: This part is important:, switch the player to MSC mode, then connect it to the PC.  3. Leave the player connected for approximately 2 hours to charge. 
4. Disconnect the player from the PC.  5. Verify if you can turn on the player.  6. Reset the player if necessary one more time. 

Jan 08, 2010 | SanDisk Sansa Clip MP3 Player

1 Answer

I was listening to my sandisk sansa mp3 player and it stopped working what to do wont turn on nothing


Try and reset. 
1. Slide and hold the Power switch up for approximately 20 seconds.
2. Release the Power switch.
3. To turn the player on, slide the Power switch up then release instantly.
 
Part 2 - Make sure the player is fully charged. 
1. Connect the player to the PC. 
2. Make sure the computer detects the player. 
NOTE: This part is important:, switch the player to MSC mode, then connect it to the PC.  3. Leave the player connected for approximately 2 hours to charge. 
4. Disconnect the player from the PC.  5. Verify if you can turn on the player.  6. Reset the player if necessary one more time. 
 

Jan 08, 2010 | SanDisk Sansa Clip MP3 Player

1 Answer

PC not detecting mp3player and also not able chage


First, make sure the hold switch is not engaged. Then:
Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

-Tha Mp3 Doctor

Dec 04, 2008 | Philips GoGear SA3125/37 MP3 Player

Not finding what you are looking for?
Transcend Tsonic 820 MP3 Player Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Transcend MP3 & Digital Media Players Experts

Gyula Lacz

Level 3 Expert

482 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

laikexpert
laikexpert

Level 3 Expert

281 Answers

Are you a Transcend MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...