I am trying to jook up a Sanyo DVW 5000 dvd/vcr player. The dvd/vcr will turn on but I cannot get anything but a blue screen. I am not sure what I am doing wrong. I cannot find my manual.... and I need help hooking it up!!
PLEASE HELP! Thank you,
Technically challenged in SC
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
We lost our original remote also. We got a generic remote. It came w/instructions & a list of brands/devices that it will work with. I found Sanyo on the list & entered the code associated w/Sanyo into the new remote & presto. We were using our DVW 5000 again.
This maybe too simplistic but are you sure you have the right command buttons toggled try to set the player to VCR and not dvd.
Set the player to VCR with a tape in it and press play. I hope this works for you
If you rabit ears have a ribbon cable you will need a coax adaptor. Radio Shack carries them. If you cant find them, you might have to get a set of rabit ears that has coax wires. The antenna will plug into the cable in of the DVR. You take the coax output and plug that into the tv using a coax wire.
I had the same problem before. I found a loose rubber ring which drives the door open/close may be the cause. Use honey wax or candle wax to wax the ring will be most likely to solve the problem. The only thing is you need open the box by yourself.