Question about Printers & Copiers

1 Answer

Hp 3500 laserjet, density sensor out of range

Posted by on

  • Anonymous May 19, 2009

    hp LaserJet 3500fuser error and also "Density sensor out of range"????
    Help ?????Please

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I didn't fix it. I am having a tech come in and look at it.

Posted on Jul 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix sensor error on hp color laserjet 2600


54.06

Error message

54.06

Description

Color density sensor error

Action

  1. Power cycle the printer.
  2. Calibrate the printer. Click here to view the document "HP Color LaserJet 2600n - Calibrating the printer" available on the HP Web site at (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00314525).
  3. Change the Print Density settings through the HP Toolbox. Click here to view the document " HP Color LaserJet 2600n Printer - Change Device Print Settings in HP Toolbox" available on the HP Web site at (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00310627).
  4. If the problem continues, contact HP Customer Support Center for technical assistance athttp://www.hp.com/support/clj2600n or see the flyer that came in the printer box for additional contact information.

Apr 02, 2014 | HP Color LaserJet 2600n Printer

1 Answer

Where is the density sensor on hp cm1312 colour laserjet?


thank you for your advise. we are having this problem, light black printer, colours are not good. we thought of the laser scanner, but thats above...as opposed to looking down, where toner can fall during print.

Dec 29, 2011 | HP LaserJet CM1312 All-In-One Printer

1 Answer

Density sensor out of range


The density sensor is located in what is called the Colour Registration Detection Assy. When you open the front door where the ETB belt is, the assembly sits were the door closes at the top on the printer side.

It can get toner on it, so check it and give it a clean. But do not touch it with your fingers.

Oct 22, 2008 | HP LaserJet 4600dn Color Printer

1 Answer

Hp 3500 faint printing and colours wrong


Rich,
Well, first off, are you using OEM or compatible cartridges? Compatibles are OK, just as long as they weren't rebuilt just by refilling. Secondly, you may want to check in the "Print Quailty" menu; here you will find info on increasing and decreasing the print density. Do you observe light printing over the entire page or just ceratin areas? How about certain colors? More to follow...............

Aug 12, 2008 | HP Color LaserJet 3500 Printer

1 Answer

How to clean a density sensor unit on a hp color laserjet 8550


1 Open the right upper door.
Sensor is located on the door lower center of door ther should be a small brush next to it
2 Use the brush located next to the sensor to remove all toner
particles from the sensor.

Jun 06, 2008 | HP Color LaserJet 8550dn Printer

3 Answers

How to clean Density Sensor of Hp 3500 ?


Thank you for this info. I used your advice to fix my HP printer and it worked. By the way, great link to HP support parges on the www.partshere.com site. I was able to fix my printer and by the way purchased more printer parts and fusers. Thank you again!

Feb 27, 2008 | HP Color LaserJet 3500 Printer

1 Answer

Density sensor out of range


CLEAN THE DENSITY SENSORS POINTING AT THE TOP OF THE TRANSFER BELT. A COLD RESET CAN HELP TOO

Jan 20, 2008 | HP Color LaserJet 3500 Printer

3 Answers

HP Color Laserjet 3500 Problem


If you are sure the diagnostics show the colours correctly, one thing I would look at is to see if it had a colour profile set up for it.Don't know whether this printer normally has, if it has not I would suggest reinstalling the driver. To check - Start/Printers & Faxes/ Rt click on printer then properties, look under Colour management tab. Pete

May 25, 2006 | HP Color LaserJet 3500 Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

382 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...