Question about Bosch Axxis WFL 2060 Front Load Washer

1 Answer

Is this a good machine

Is it

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 95 Answers

I haven't heard of any horror stories out of the ordinary.

Posted on Jul 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Machine not displaying anything


check your power outlet first. if power is good, check your power cord. or you may have an noise filter board, or control board issue. if power is good, you may want to call in a pro to check the machine side.

Nov 28, 2015 | Washing Machines

1 Answer

Hotpoint washing machine wt960 not working because fo8 code come


Hi Hitendra,
F08 is a sticking heater relay. First check that connections on pressure switch are good, Check that heater connections are good.Check the board connections.Check that pump filter is clear.
Hope this helps!
Wayne

Nov 20, 2014 | Hotpoint Washing Machines

1 Answer

The machine doesn't work even in plug


First check that the house circuit breaker isn't tripped. If it seems good, unplug the machine and plug a lamp or something in to check receptical. If all seems good let me know.

Jan 20, 2013 | Washing Machines

1 Answer

Machine viabrates badly whether empty or loaded. Machine has been checked for balance.


Did you pull the packing strap from the rear legs it is sometimes a yellow pin. lean unit forward look at rear of machine pin holds the legs up for shipping pull that out.set machine down lean unit forward to balance rear legs should be good to go...If I helped you Please vote need more help just ask Good luck...

Feb 03, 2011 | Maytag PAV2300 Top Load Washer

1 Answer

Sounds like rocks are in the washing machine and then machine stopped working mid cycle


i think your machine have problem in the motor.. you should check it,or most likely,buy a new one..i know a site that can offer good washing machine in a good price..

http://www.washingmachineadvisor.com/

Nov 18, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

Washing machine agitator not working, and will not fully drain.


There are many reasons that this may happen. depending on the machine. It could be the motor, belt, clutch, or gear. Does it spin? If it does, the motor is probably good. Hope this helps.

Good ratings are important to us, please be fair..

Aug 29, 2009 | Washing Machines

1 Answer

My washing machine is presenting LE error, I have already replaced part # 6501KW2002A - Hall Sensor Assembly. I try running QC test, I have cleaned filters on back of machine, I have drained off the water...


LE = locked rotor. Replacing most common problem (hall effect sensor) didn't work.

1. Is rotor really locked?
2. Does control board simply think rotor is locked?
3. Is wiring good?
4. Did you install a defective sensor?
5. Is circuitry on control board bad, and reading sensor wrong?
6. Do you know any good repair people who are good with high tech? I do. . . ME!

Good luck.

Jun 19, 2009 | LG Washing Machines

1 Answer

Machine no power, power supply good, fuse in plug good machine will not turn on.machine type zanussi washer dryer 3 months old.


hello inside the machine theres is circuit board at the bottom there might be a glass fuse on the board which might have blown make sure the power is off before you check it good luck

shaun

Mar 18, 2009 | Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

Mav6200AWW Washing Machine


Check whether the power plug of machine is good, connections, fuse, etc. All good, then try below:

Plug off the wall socket. Open up the machine. Remove, reseat and reconnect every connector at least 3 times. Remove the motor control board, spray it down with electronic cleaner along with all connections by disconnecting them, spraying them down. Disconnect and connect a few times to ensure good contact.. This normally works.

Pl give me a ‘very helpful’ rating for the free help, thanks.

Oct 19, 2008 | Maytag Atlantis MAV6451 Top Load Washer

Not finding what you are looking for?
Bosch Axxis WFL 2060 Front Load Washer Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...