Question about Canon Digital Cameras

1 Answer

I have a canon Power Shot A520 and want to download several moving pictures to a DISH network TV.I have the interface cable (that came with the camera) attached to both the TV and the camera as I did to successfully download to my computer. However, I don't know what to do next. DISH folks say they don't know how. Can you help? Jack Sayers

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,469 Answers

Page 114 in the manual gives details.
1. Turn camera off.
2. Connect the AVC-DC300 cable to A/V out terminal on camera, and yellow RCA jack to the Video In port and black RCA jack to Audio In port on the television.
3. Set television for Video input.
4. Turn on camera.
5. If no picture on television, press the Display button on the camera (to turn off the LCD display on the camera).

Posted on Jul 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a new disc for my Power Shot A520


you can download the program from this site and then savve it on ur computer and burn it on to a disk / dvd http://www.imaging-resource.com/PRODS/A520/A52A.HTM

Jul 15, 2011 | Canon PowerShot A520 Digital Camera

1 Answer

After a picture is taken my canon camera power shot a520, takes quite a while to load and allow me to take another shot immediately and its very embarrassing to make ppl wait till another shot is taken.


how maney photos do you have on the memory stick you may need to free it up by downloading them to a usb stick on your computer so you can free up some memory

Dec 20, 2010 | Canon PowerShot A520 Digital Camera

1 Answer

How to install program without disc on cannon power shot A520 camera


You can download software from the manufacturer's web site at
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a520#DriversAndSoftware

You might want to consider NOT connecting the camera to the computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive. Or you can use any photo cataloging program.

Dec 13, 2010 | Canon PowerShot A520 Digital Camera

2 Answers

I have a Canon Power Shot A520 and have just put in a new memory card 4GB and new batteries. When I turn on camera is says memory card error at the top of the sceen. Why is that?


The A520 is designed to work with SD cards. Your 4GB card is actually an SDHC card. While it fits into the slot, it is electronically incompatible.

You need to use SD cards 2GB and smaller.

Oct 05, 2010 | Canon PowerShot A520 Digital Camera

1 Answer

Question after I download my pictures to my pc. can I redownload the pictures back to the canon power shot a520?


As a part of the download process, most cameras and transfer applications ask you if you want to delete the images off of your camera once they've successfully transferred to your PC. Check the preference setting of the application you're using to transfer the images to your PC. Best way to check is to transfer images to your PC, disconnect the transfer cable and see if the images are still on your camera.

Nov 17, 2009 | Canon PowerShot A75 Digital Camera

1 Answer

How do I download the pictures off my power shot a520 canon camara? I have it hook up to the usb cord but I still can not get any pictures off it.


Once you have connected the camera to the PC via USB, the pc should identify the camera (on Windows XP and later versions). In case this doesn't happen try re-starting the camera, alternately switch to another USB socket on your PC.

Dec 10, 2008 | Canon PowerShot A520 Digital Camera

Not finding what you are looking for?
Digital Cameras Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...